Chemistry : Section – A
51. The correct decreasing order of atomic radii (pm) of Li, Be, B, and C is
(1) Be > Li > B > C
(2) Li > Be > B > C
(3) C > B > Be > Li
(4) Li > C > Be > B
Answer: (2) Li > Be > B > C
Explanation:
Lithium (Li), Beryllium (Be), Boron (B), and Carbon (C) all belong to the same period (Period 2) in the periodic table. When we move from left to right across a period, the atomic number increases. As a result, the effective nuclear charge (attraction between nucleus and electrons) also increases.
Due to the stronger attraction, the electrons are pulled closer to the nucleus. Therefore, the atomic radius decreases from left to right across the period.
Hence, the correct decreasing order of atomic radii is: Li (largest) > Be > B > C (smallest)
So, the correct option is (2).
52. Following data is for a reaction between reactants A and B:
| Rate mol L$^{-1}$ s$^{-1}$ | [A] | [B] |
| $2 \times 10^{-3}$ | 0.1 M | 0.1 M |
| $4 \times 10^{-3}$ | 0.2 M | 0.1 M |
| $1.6 \times 10^{-2}$ | 0.2 M | 0.2 M |
The order of the reaction with respect to A and B, respectively, are
(1) 1, 0
(2) 1, 1
(3) 1, 2
(4) 2, 1
Answer: (3) 1, 2
Explanation:
Let the rate law be: $\text{Rate} = k[A]^x[B]^y$
We will use the experimental data to find the orders $x$ and $y$.
Step 1: Compare Experiments 1 and 2
([B] is constant, [A] changes from 0.1 to 0.2 M)
From the data:
$$\frac{\text{Rate}_2}{\text{Rate}_1} = \frac{4 \times 10^{-3}}{2 \times 10^{-3}} = 2$$
$$\frac{[A]_2}{[A]_1} = \frac{0.2}{0.1} = 2$$
So,
$$\frac{\text{Rate}_2}{\text{Rate}_1} = \left(\frac{[A]_2}{[A]_1}\right)^x$$
$$2 = 2^x \Rightarrow x = 1$$
Step 2: Compare Experiments 2 and 3
([A] is constant, [B] changes from 0.1 to 0.2 M)
From the data:
$$\frac{\text{Rate}_3}{\text{Rate}_2} = \frac{1.6 \times 10^{-2}}{4 \times 10^{-3}} = 4$$
$$\frac{[B]_3}{[B]_2} = \frac{0.2}{0.1} = 2$$
So,
$$\frac{\text{Rate}_3}{\text{Rate}_2} = \left(\frac{[B]_3}{[B]_2}\right)^y$$
$$4 = 2^y \Rightarrow y = 2$$
Final orders:
– Order with respect to A: 1
– Order with respect to B: 2
Thus, correct answer is option (3) 1, 2
53. Given below are two statements:
Statement I: Propene on treatment with diborane gives an addition product with the formula
$((CH_3)_2 – CH_3B)$.
Statement II: Oxidation of $((CH_3)_2 – CH_3B)$ with hydrogen peroxide in presence of NaOH gives propan-2-ol.
In the light of the above statements, choose the most appropriate answer from the options given below:
(1) Statement I is correct but Statement II is incorrect
(2) Statement I is incorrect but Statement II is correct
(3) Both Statement I and Statement II are correct
(4) Both Statement I and Statement II are incorrect
Answer: (2) Statement I is incorrect but Statement II is correct
54. Baeyerโs reagent is:
(1) Acidic potassium permanganate solution
(2) Acidic potassium dichromate solution
(3) Cold, dilute, aqueous solution of potassium permanganate
(4) Hot, concentrated solution of potassium permanganate
Answer: (3) Cold, dilute, aqueous solution of potassium permanganate
Explanation:
Baeyerโs reagent is a cold and dilute solution of potassium permanganate (KMnO$_4$). It is commonly used as a test for unsaturation in organic compounds, i.e., to detect the presence of alkenes (C=C) or alkynes (CโกC).
When Baeyerโs reagent is added to an unsaturated compound:
- The purple colour of KMnO$_4$ disappears
- A brown precipitate of manganese dioxide (MnO$_2$) is formed
This colour change indicates a positive test for unsaturation.
Reaction observation:
Purple KMnO$_4$ โ Brown MnO$_2$ (indicates presence of double or triple bonds)
55. Which of the following molecules has “NON ZERO” dipole moment value?
(1) CCl$_4$
(2) HI
(3) CO$_2$
(4) BF$_3$
Answer: (2) HI
Explanation:
Dipole moment exists only when a molecule is polar and the charges do not cancel out.
- CCl$_4$, CO$_2$, BF$_3$ are symmetrical molecules
โ their bond dipoles cancel each other
โ dipole moment = 0 - HI is a polar diatomic molecule
โ the two atoms have different electronegativities
โ charges do not cancel
โ dipole moment = non-zero
So, HI is the only molecule with a non-zero dipole moment.
56. The major product X formed in the following reaction sequence is:

(1)

(2)

(3)

(4)

Answer: (3)

57. Which indicator is used in the titration of sodium hydroxide against oxalic acid and what is the colour change at the end point?
(1) Phenolphthalein, pink to yellow
(2) Alkaline KMnO$_4$, colourless to pink
(3) Phenolphthalein, colourless to pink
(4) Methyl orange, yellow to pinkish red colour
Answer: (3) Phenolphthalein, colourless to pink
Explanation:
The titration between oxalic acid (acid) and sodium hydroxide (base) is an acidโbase titration.
Oxalic acid is a weak acid, and sodium hydroxide is a strong base.
For weak acid vs strong base titrations:
- Phenolphthalein is the correct indicator
- The colour change at end point is:
Colourless โ Pink
This pink colour appears when a small amount of extra NaOH is added after neutralization.
58. Match List-I with List-II:
| List-I (Atom/Molecule) | List-II (Property) |
| A. Nitrogen atom | I. Paramagnetic |
| B. Fluorine molecule | II. Most reactive element in group 18 |
| C. Oxygen molecule | III. Element with highest ionisation enthalpy in group 15 |
| D. Xenon atom | IV. Strongest oxidising agent |
Identify the correct answer from the options given below:
(1) A-III, B-I, C-IV, D-II
(2) A-I, B-IV, C-III, D-II
(3) A-II, B-IV, C-I, D-III
(4) A-III, B-IV, C-I, D-II
Answer: (4) A-III, B-IV, C-I, D-II
Explanation:
| List-I | Species | Correct Property | Reason |
| A. Nitrogen atom | N | III. Element with highest ionisation enthalpy in group 15 | Nitrogen has a stable half-filled (2p^3) configuration, so it has highest ionisation enthalpy in group 15 |
| B. Fluorine molecule | Fโ | IV. Strongest oxidising agent | Fluorine is the strongest oxidant due to its highest electronegativity |
| C. Oxygen molecule | Oโ | I. Paramagnetic | Oโ has two unpaired electrons, hence strongly paramagnetic |
| D. Xenon atom | Xe | II. Most reactive element in group 18 | Xenon is the most reactive noble gas because of its larger size and lower ionisation energy than Ne, Ar, etc. |
59. From the following select the one which is not an example of corrosion.
(1) Rusting of iron object
(2) Production of hydrogen by electrolysis of water
(3) Tarnishing of silver
(4) Development of green coating on copper and bronze ornaments
Answer: (2) Production of hydrogen by electrolysis of water
Explanation:
Corrosion means slow destruction of a metal by reacting with moisture, air or chemicals in the environment.
Examples of corrosion:
- Rusting of iron โ formation of iron oxide
- Tarnishing of silver โ formation of silver sulphide
- Green coating on copper/bronze โ formation of basic copper carbonate
These are surface attacks that damage the metal.
But:
- Production of hydrogen by electrolysis of water is a chemical process to obtain hydrogen gas.
It does not involve damage or destruction of metal.
So, it is not an example of corrosion.
60. Which of the following pairs of ions will have the same spin-only magnetic moment values within the pair?
A. Zn$^{2+}$, Ti$^{2+}$
B. Cr$^{2+}$, Fe$^{2+}$
C. Ti$^{3+}$, Cu$^{2+}$
D. V$^{2+}$, Cu$^{+}$
Choose the correct answer from the options given below:
(1) C and D only
(2) A and D only
(3) A and B only
(4) B and C only
Answer: (4) B and C only
Answer: (4) B and C only
Explanation:
We are asked to identify which pairs of ions have the same spin-only magnetic moment, which depends on the number of unpaired electrons $n$.
The spin-only magnetic moment is given by: $\mu = \sqrt{n(n+2)} \ \text{BM}$
Option A: Zn$^{2+}$ and Ti$^{2+}$
Zn (atomic number 30), Zn$^{2+}$ = [Ar] 3d$^{10}$ โ $n = 0$
Ti (atomic number 22), Ti$^{2+}$ = [Ar] 3d$^{2}$ โ $n = 2$
Different unpaired electrons โ Different $\mu$ โ Incorrect
Option B: Cr$^{2+}$ and Fe$^{2+}$
Cr (atomic number 24), Cr$^{2+}$ = [Ar] 3d$^{4}$ โ $n = 4$
Fe (atomic number 26), Fe$^{2+}$ = [Ar] 3d$^{6}$ โ $n = 4$
Same $n$, so
$$\mu = \sqrt{4(4+2)} = \sqrt{24} \approx 4.90 \ \text{BM}$$
โ Correct
Option C: Ti$^{3+}$ and Cu$^{2+}$
Ti (atomic number 22), Ti$^{3+}$ = [Ar] 3d$^{1}$ โ $n = 1$
Cu (atomic number 29), Cu$^{2+}$ = [Ar] 3d$^{9}$ โ $n = 1$
Same $n$, so
$$\mu = \sqrt{1(1+2)} = \sqrt{3} \approx 1.73 \ \text{BM}$$
โ Correct
Option D: V$^{2+}$ and Cu$^{+}$
V (atomic number 23), V$^{2+}$ = [Ar] 3d$^{3}$ โ $n = 3$
Cu (atomic number 29), Cu$^{+}$ = [Ar] 3d$^{10}$ โ $n = 0$
Different $n$ โ Different $\mu$ โ Incorrect
Correct options: B and C only
So, correct answer is option (4) B and C only
61. At a given temperature and pressure, the equilibrium constant values for the equilibria are given below:
$$ 3A_2 + B_2 \rightleftharpoons 2A_3B, \quad K_1 $$
$$ A_3B \rightleftharpoons \frac{3}{2} A_2 + \frac{1}{2} B_2, \quad K_2 $$
The relation between $K_1$ and $K_2$ is:
(1) $K_1^2 = 2K_2$
(2) $K_2 = \frac{K_1}{2}$
(3)$K_1 = \frac{1}{\sqrt{K_2}}$
(4) $K_2 = \frac{1}{\sqrt{K_1}}$
Answer: (4) $K_2 = \frac{1}{\sqrt{K_1}}$
62. Arrange the following compounds in increasing order of their solubilities in chloroform:
$NaCl, CH_3OH$, cyclohexane, $CH_3CN$
(1) $NaCl < CH_3CN < CH_3OH <$ Cyclohexane
(2) $CH_3OH < CH_3CN < NaCl < $Cyclohexane
(3) $NaCl < CH_3OH < CH_3CN <$ Cyclohexane
(4) Cyclohexane $ < CH_3CN < CH_3OH < NaCl$
Answer: (1) $NaCl < CH_3CN < CH_3OH <$ Cyclohexane
63. Identify the incorrect statement about PCl_5.
(1) PCl_5 possesses two different Cl – P – Cl bond angles
(2) All five P – Cl bonds are identical in length
(3) PCl_5 exhibits sp^3d hybridisation
(4) PCl_5 consists of five P – Cl (sigma) bonds
Answer: (2) All five P – Cl bonds are identical in length
Explanation:
Phosphorus pentachloride (PCl$_5$) has a trigonal bipyramidal geometry, with the central phosphorus atom bonded to five chlorine atoms.
In this geometry:
– Three Cl atoms occupy the equatorial positions, forming bond angles of $120^\circ$ with each other.
– Two Cl atoms occupy the axial positions, forming bond angles of $90^\circ$ with the equatorial atoms.
Due to this geometry:
– The axial PโCl bonds are longer and weaker than the equatorial PโCl bonds because of greater repulsion and bond strain.
Hence, all five PโCl bonds are not identical in length, making statement (2) incorrect.
Other statements are correct:
– (1) PCl$_5$ does have two different ClโPโCl bond angles: $90^\circ$ and $120^\circ$.
– (3) The hybridisation of phosphorus in PCl$_5$ is $sp^3d$.
– (4) All five bonds in PCl$_5$ are sigma bonds.
The incorrect statement is option (2).
64. Choose the correct statement for the work done in the expansion and heat absorbed or released when 5 litres of an ideal gas at 10 atmospheric pressure isothermally expands into vacuum until volume is 15 litres:
(1) Both the heat and work done will be greater than zero
(2) Heat absorbed will be less than zero and work done will be positive
(3) Work done will be zero and heat will also be zero
(4) Work done will be greater than zero and heat will remain zero
Answer: (3) Work done will be zero and heat will also be zero
Explanation:
The process described is a free expansion of an ideal gas into a vacuum.
Given:
– Initial volume = 5 L
– Final volume = 15 L
– Pressure = 10 atm
– Expansion is isothermal (constant temperature)
– Expansion into vacuum (external pressure = 0)
Key concept:
In free expansion:
– The gas expands without opposing force (no external pressure), so no work is done.
$$W = -\int P_{\text{ext}} \, dV = 0 \quad \text{(since } P_{\text{ext}} = 0\text{)}$$
Since the process is isothermal and the gas is ideal:
– Internal energy change, $\Delta U = 0$ (depends only on temperature)
– By the first law of thermodynamics:
$$\Delta U = Q – W$$
Substitute values:
$$0 = Q – 0 \Rightarrow Q = 0$$
So,
– Work done $W = 0$
– Heat absorbed or released $Q = 0$
Therefore, the correct statement is option(3)
65. The correct IUPAC name of the compound

(1) 4-ethyl-1-fluoro-2-nitrobenzene
(2) 4-ethyl-1-fluoro-6-nitrobenzene
(3) 3-ethyl-6-fluoro-1-nitrobenzene
(4) 1-ethyl-4-fluoro-3-nitrobenzene
Answer: (1) 4-ethyl-1-fluoro-2-nitrobenzene
66. Which of the following set of ions act as oxidising agents?
(1) $Ce^{4+}$ and $Tb^{4+}$
(2) $La^{3+}$ and $Lu^{3+}$
(3) $Eu^{2+}$ and $Yb^{2+}$
(4) $Eu^{2+}$ and $Tb^{4+}$
Answer: (1) $Ce^{4+}$ and $Tb^{4+}$
Explanation:
An oxidising agent is a species that gets reduced by gaining electrons, thereby causing oxidation of another species.
For lanthanides:
– The +3 oxidation state is the most stable and common.
– Ions in higher oxidation states like +4 tend to gain electrons to attain the more stable +3 state.
– Thus, Ce$^{4+}$ and Tb$^{4+}$ can act as oxidising agents because they can be reduced to Ce$^{3+}$ and Tb$^{3+}$ respectively.
In contrast:
– Eu$^{2+}$ and Yb$^{2+}$ are more stable in the +2 oxidation state due to half-filled and fully-filled $f$-orbitals respectively, and they tend to lose electrons to form the +3 state. Hence, they act as reducing agents, not oxidising agents.
– La$^{3+}$ and Lu$^{3+}$ are already in their most stable +3 state and do not tend to get reduced.
Therefore, the only ions in the list that can act as oxidising agents are: $Ce^{4+}$ and $Tb^{4+}$
67. Select the incorrect reaction among the following:
(1)

(2)

(3)

(4)

Answer: (2)
Explanation:
We are asked to identify the incorrect reaction among the following:
Option (1): CH$_3$COCl $\xrightarrow{H_2O, \ \Delta}$ CH$_3$COOH
Acid chlorides hydrolyze to carboxylic acids on heating with water.
This reaction is correct.
Option (2): Benzamide (C$_6$H$_5$CONH$_2$) is treated with LiAlH$_4$ followed by hydrolysis.
LiAlH$_4$ reduces amides to amines, not to carboxylic acids.
Expected product: C$_6$H$_5$CH$_2$NH$_2$
But the given product is C$_6$H$_5$COOH, which is incorrect.
Option (3): CH$_3$CH$_2$OH $\xrightarrow[\text{H}_3\text{O}^+]{\text{KMnO}_4/\text{OH}^-}$ CH$_3$COOH
Primary alcohols are oxidized to carboxylic acids by KMnO$_4$ under basic conditions followed by acidification.
This reaction is correct.
Option (4): CH$_3$CH$_2$CH$_2$OH $\xrightarrow{\text{CrO}_3/\text{H}_2\text{SO}_4}$ CH$_3$CH$_2$COOH
Primary alcohols are oxidized to carboxylic acids using CrO$_3$/H$_2$SO$_4$ (Jones reagent).
This reaction is correct.
So, correct answer is option (2).
68. The UV-visible absorption bands in the spectra of lanthanoid ions are ‘X’, probably because of the excitation of electrons involving ‘Y’. The ‘X’ and ‘Y’, respectively, are :
(1) Broad and f orbitals
(2) Narrow and f orbitals
(3) Broad and d and f orbitals
(4) Narrow and d and f orbitals
Answer: (2) Narrow and f orbitals
Explanation: Lanthanoid ions exhibit narrow UV-visible absorption bands. This is due to electronic transitions within the 4f orbitals.
Key points:
– The 4f orbitals are well shielded by the outer 5s and 5p orbitals.
– As a result, the 4f electrons are not significantly affected by the surrounding environment or ligands.
– This leads to sharp (narrow) absorption bands in the spectra, as the transitions are minimally split by the ligand field.
– The electronic transitions responsible for absorption occur within the 4f orbitals (intra-4f transitions).
In contrast:
– d-orbital transitions (as seen in transition metals) usually lead to broad absorption bands due to stronger interaction with the ligand field.
Therefore:
– X = Narrow
– Y = f orbitals
Therefore, the correct answer is option (2) Narrow and f orbitals
69. Ethylene diamine tetraacetate ion is a/an:
(1) hexadentate ligand
(2) ambidentate ligand
(3) monodentate ligand
(4) bidentate ligand
Answer: (1) hexadentate ligand
Explanation:
The ethylenediaminetetraacetate ion is commonly known as EDTA$^{4-}$.
EDTA$^{4-}$ contains:
– Two nitrogen atoms from the ethylenediamine group, each with a lone pair.
– Four oxygen atoms from four carboxylate (-COO$^-$) groups.
Each of these six donor atoms can coordinate with a metal ion.
Therefore,
– EDTA$^{4-}$ forms six coordinate bonds with a central metal ion.
– Such ligands are called hexadentate ligands.
Therefore, the correct answer is option (1) hexadentate ligand
70. The amount of glucose required to prepare 250 mL of $\dfrac{M}{20}$ aqueous solution is:
(Molar mass of glucose : 180 g mol$^{-1}$)
(1) 2.25 g
(2) 4.5 g
(3) 0.44 g
(4) 1.125 g
Answer: (1) 2.25 g
Explanation:
Given:
– Volume of solution = 250 mL = 0.250 L
– Molarity = $\frac{M}{20}$
– Molar mass of glucose = 180 g/mol
Step 1: Calculate molarity in decimal form
$$M = \frac{1}{20} = 0.05 \ \text{mol/L}$$
Step 2: Use molarity formula
$$\text{Molarity} = \frac{\text{Moles of solute}}{\text{Volume in L}}$$ $$\text{Moles} = 0.05 \times 0.250 = 0.0125 \ \text{mol}$$
Step 3: Convert moles to grams
$$\text{Mass} = \text{Moles} \times \text{Molar mass}$$ $$\text{Mass} = 0.0125 \times 180 = 2.25 \ \text{g}$$
Thus, correct answer is option (1) 2.25 g
71. Identify the incorrect statement from the following:
(1) The acidic strength of HX (X = F, Cl, Br and I) follows the order : HF $>$ HCl $>$ HBr $>$ HI.
(2) Fluorine exhibits $-1$ oxidation state whereas other halogens exhibit $+1$, $+3$, $+5$ and $+7$ oxidation states also.
(3) The enthalpy of dissociation of F$_2$ is smaller than that of Cl$_2$.
(4) Fluorine is stronger oxidising agent than chlorine.
Answer: (1) The acidic strength of HX (X = F, Cl, Br and I) follows the order : HF $>$ HCl $>$ HBr $>$ HI.
Explanation: The correct order of acidic strength of hydrogen halides (HX) is: $HF < HCl < HBr < HI$
Reason:
– Acidic strength depends on the ease of bond dissociation between H and X.
– As the size of halogen increases from F to I, the HโX bond becomes weaker and easier to break.
– HI has the weakest bond and hence is the strongest acid among the hydrogen halides.
– HF has the strongest bond and is the weakest acid despite high electronegativity of fluorine.
Explanation of other statements:
(2) Fluorine shows only $-1$ oxidation state due to absence of d-orbitals. Other halogens show multiple positive oxidation states like $+1$, $+3$, $+5$, and $+7$. This is correct.
(3) The bond dissociation enthalpy of F$_2$ is smaller than that of Cl$_2$ due to inter-electronic repulsions in the small F$_2$ molecule. This is correct.
(4) Fluorine is the strongest oxidising agent among halogens due to its high electronegativity and low bond dissociation enthalpy. This is correct.
Therefore, the incorrect statement is option (1).
72. For the reaction in equilibrium
N$_2$(g) + 3H$_2$(g) $\rightleftharpoons$ 2NH$_3$(g), $\Delta H = -Q$
Reaction is favoured in forward direction by:
(1) use of catalyst
(2) decreasing concentration of N$_2$
(3) low pressure, high temperature and high concentration of ammonia
(4) high pressure, low temperature and higher concentration of H$_2$
Answer: (4) high pressure, low temperature and higher concentration of H$_2$
Explanation:
This is an exothermic reaction and involves a decrease in the number of gaseous moles:
– Reactants: 1 mol N$_2$ + 3 mol H$_2$ = 4 mol of gas
– Products: 2 mol NH$_3$ = 2 mol of gas
According to Le Chatelier’s Principle, the forward reaction is favored by:
– High pressure, because fewer gas molecules are formed in the forward direction
– Low temperature, because the reaction is exothermic
– Increasing the concentration of H$_2$, which pushes the equilibrium toward product formation
Option (4) satisfies all these conditions.
Other options:
– (1) A catalyst increases the rate of reaction but does not shift the equilibrium
– (2) Decreasing N$_2$ concentration shifts the equilibrium backward
– (3) Low pressure and high temperature favor the reverse reaction, and high ammonia concentration also shifts equilibrium backward
Therefore, the correct answer is option (4)
73. The major product D formed in the following reaction sequence is:

(1)

(2)

(3) $CH_3CH_2OH$
(4) $CH_3CH_2Cl$
Answer: (3) $CH_3CH_2OH$
74. Match List-I with List-II:
| List – I (Block/group in periodic table) | List – II (Element) |
| A. Lanthanoid | I. Ce |
| B. d-block element | II. As |
| C. p-block element | III. Cs |
| D. s-block element | IV. Mn |
Choose the correct answer from the options given below:
(1) A-I, B-II, C-IV, D-III
(2) A-I, B-IV, C-III, D-II
(3) A-I, B-IV, C-II, D-III
(4) A-IV, B-I, C-II, D-III
Answer: (3) A-I, B-IV, C-II, D-III
75. Which of the following is not an ambidentate ligand?
(1) $C_2O^{2-}_4$
(2) $SCN^-$
(3) $NO^-_2$
(4) $CN^-$
Answer: (1) $C_2O^{2-}_4$
Explanation:
An ambidentate ligand is a ligand that can coordinate to a metal ion through two different donor atoms, but only one at a time.
Examples of ambidentate ligands:
– SCN$^-$ (thiocyanate): can bind through either sulfur (S) or nitrogen (N)
– NO$_2^-$ (nitrite): can bind through either nitrogen (N) or oxygen (O)
– CN$^-$ (cyanide): can bind through either carbon (C) or nitrogen (N)
These ligands offer alternative binding sites, hence are ambidentate.
Now consider:
C$_2$O$_4^{2-}$ (oxalate ion):
– It is a bidentate ligand, not ambidentate
– It coordinates through two oxygen atoms simultaneously, not alternatively
– Hence, it is not classified as ambidentate
Therefore, among the given options: C$_2$O$_4^{2-}$ is not an ambidentate ligand.
Therefore, the correct answer is option (1).
76. The quantum numbers of four electrons are given below :
I. $n = 4$; $l = 2$; $m_l = -2$; $s = -\dfrac{1}{2}$
II. $n = 3$; $l = 2$; $m_l = 1$; $s = + \dfrac{1}{2}$
III. $n = 4$; $l = 1$; $m_l = 0$; $s = + \dfrac{1}{2}$
IV. $n = 3$; $l = 1$; $m_l = -1$; $s = + \dfrac{1}{2}$
The correct decreasing order of energy of these electrons is
(1) IV $>$ II $>$ III $>$ I
(2) I $>$ II $>$ III $>$ IV
(3) III $>$ I $>$ II $>$ IV
(4) I $>$ II $>$ III $>$ IV
Answer: (2) I $>$ II $>$ III $>$ IV
77. The major product C in the below mentioned reaction is:
$CH_3CH_2CH_2Br \xrightarrow[ \Delta ]{ alc.\ KOH } A \xrightarrow{ HBr } B \xrightarrow[ \Delta ]{ aq.\ KOH } C$
(1) Propan-1-ol
(2) Propan-2-ol
(3) Propane
(4) Propyne
Answer: (2) Propan-2-ol
Explanation:
The given reaction sequence is: $\text{CH}_3\text{CH}_2\text{CH}_2\text{Br} \xrightarrow{\text{alc. KOH},\ \Delta} A \xrightarrow{\text{HBr}} B \xrightarrow{\text{aq. KOH},\ \Delta} C$
Step 1: Dehydrohalogenation
1-bromopropane reacts with alcoholic KOH under heat, which eliminates HBr to form an alkene (E2 reaction):
$$\text{CH}_3\text{CH}_2\text{CH}_2\text{Br} \xrightarrow{\text{alc. KOH}} \text{CH}_3\text{CH}=\text{CH}_2$$
So, A = propene
Step 2: Electrophilic addition of HBr
Propene reacts with HBr. According to Markovnikovโs rule, H adds to the carbon with more H atoms, and Br goes to the more substituted carbon:
$$\text{CH}_3\text{CH}=\text{CH}_2 \xrightarrow{\text{HBr}} \text{CH}_3\text{CHBrCH}_3$$
So, B = 2-bromopropane
Step 3: Nucleophilic substitution with aqueous KOH
2-bromopropane undergoes substitution with aq. KOH to form an alcohol: $\text{CH}_3\text{CHBrCH}_3 \xrightarrow{\text{aq. KOH}} \text{CH}_3\text{CHOHCH}_3$
So, C = propan-2-ol
Therefore, the correct answer is option (2) Propan-2-ol
78. The compound that does not undergo Friedel-Crafts alkylation reaction but gives a positive carbylamine test is:
(1) Aniline
(2) Pyridine
(3) N-methylaniline
(4) Triethylamine
Answer: (1) Aniline
Explanation:
Friedel-Crafts alkylation requires an electron-rich aromatic ring and is typically carried out in the presence of a Lewis acid catalyst like AlCl$_3$.
Aniline (C$_6$H$_5$NH$_2$) has an amino group that donates electrons to the ring via resonance, but it also forms a complex with AlCl$_3$, deactivating the ring toward electrophilic substitution. As a result:
Aniline does not undergo Friedel-Crafts alkylation.
Now consider the carbylamine test (also called isocyanide test):
– It is a test for primary amines (both aliphatic and aromatic).
– Aniline is a primary aromatic amine.
– It gives a positive carbylamine test when treated with chloroform and alcoholic KOH, producing foul-smelling isocyanide.
Other options:
– Pyridine is a basic heterocyclic compound, not a primary amine.
– N-methylaniline is a secondary amine and gives a negative carbylamine test.
– Triethylamine is a tertiary amine and also gives a negative carbylamine test.
Therefore, the correct answer is option (1) Aniline
79. For an endothermic reaction:
(A) $q_p$ is negative.
(B) $\Delta_r H$ is positive.
(C) $\Delta_r H$ is negative.
(D) $q_p$ is positive.
Choose the correct answer from the options given below:
(1) B and D
(2) C and D
(3) A and B
(4) A and C
Answer: (1) B and D
Explanation:
In an endothermic reaction:
– Heat is absorbed by the system from the surroundings.
– Therefore, heat at constant pressure, $q_p$, is positive.
– Also, change in enthalpy, $\Delta H$, is positive.
Now examine the statements:
(A) $q_p$ is negative โ incorrect
(B) $\Delta H$ is positive โ correct
(C) $\Delta H$ is negative โ incorrect
(D) $q_p$ is positive โ correct
Hence, correct statements are B and D.
80. 1.0g of H$_2$ has same number of molecules as in:
(1) 14 g of N$_2$
(2) 18 g of H$_2$O
(3) 16 g of CO
(4) 28 g of N$_2$
Answer: (1) 14 g of N$_2$
Explanation:
We are given: 1.0 g of H$_2$ has the same number of molecules as in which of the given options?
Step 1: Calculate moles of H$_2$
Molar mass of H$_2$ = 2 g/mol
$$\text{Moles of H}_2 = \frac{1.0}{2} = 0.5 \ \text{mol}$$
Now we calculate moles in each option and check which one has 0.5 mol:
Option (1): 14 g of N$_2$
Molar mass of N$_2$ = 28 g/mol
$$\frac{14}{28} = 0.5 \ \text{mol}$$ โ Same number of molecules
Option (2): 18 g of H$_2$O
Molar mass of H$_2$O = 18 g/mol
$$\frac{18}{18} = 1.0 \ \text{mol}$$ โ More molecules
Option (3): 16 g of CO
Molar mass of CO = 28 g/mol
$$\frac{16}{28} \approx 0.571 \ \text{mol}$$ โ More molecules
Option (4): 28 g of N$_2$
$$\frac{28}{28} = 1.0 \ \text{mol}$$ โ More molecules
Only option (1) has the same number of moles (and hence same number of molecules) as 1.0 g of H$_2$.
Hence, correct answer is option (1) 14 g of N$_2$
81. Which of the following plot represents the variation of ln k versus $\frac{1}{T}$ in accordance with Arrhenius equation?
(1)

(2)

(3)

(4)

Answer: (3)
82. A steam volatile organic compound which is immiscible with water has a boiling point of 250ยฐC. During steam distillation, a mixture of this organic compound and water will boil :
(1) above 100ยฐC but below 250ยฐC
(2) above 250ยฐC
(3) at 250ยฐC
(4) close to but below 100ยฐC
Answer: (4) close to but below 100ยฐC
Explanation: Steam distillation is used to purify or isolate steam volatile and water-immiscible organic compounds.
In this process:
– The total vapor pressure is the sum of the vapor pressures of water and the organic compound.
– Boiling occurs when this total vapor pressure equals atmospheric pressure.
Because both liquids are immiscible, each component exerts its own vapor pressure independently.
This allows the mixture to boil at a temperature lower than the boiling point of either component.
Since water boils at 100ยฐC and the compound has a boiling point of 250ยฐC, the mixture will boil at a temperature lower than 100ยฐC but sufficient for distillation of the compound.
Hence, the mixture of the organic compound and water will boil close to but below 100ยฐC.
83. Given below are two statements :
Statement I : Glycogen is similar to amylose in its structure.
Statement II : Glycogen is found in yeast and fungi also.
In the light of the above statements, choose the correct answer from the options given below :
(1) Statement I is true but Statement II is false.
(2) Statement I is false but Statement II is true.
(3) Both Statement I and Statement II are true.
(4) Both Statement I and Statement II are false.
Answer: (2) Statement I is false but Statement II is true.
Explanation:
Statement I: Glycogen is similar to amylose in its structure.
This is false.
Amylose is a linear polymer of glucose units linked by $\alpha(1 \rightarrow 4)$ glycosidic bonds.
Glycogen, on the other hand, is a branched polymer similar to amylopectin. It contains both $\alpha(1 \rightarrow 4)$ and $\alpha(1 \rightarrow 6)$ linkages (at the branching points), and is even more highly branched than amylopectin.
Therefore, glycogen is not structurally similar to amylose.
Statement II: Glycogen is found in yeast and fungi also.
This is true.
Glycogen serves as the main storage polysaccharide in animals, fungi, and microorganisms like yeast.
Therefore, the correct answer is option (2) Statement I is false but Statement II is true.
84. The oxidation states not shown by Mn in the given reaction is :
$3MnO_4^{2-} + 4H^+ \longrightarrow 2MnO_4^- + MnO_2 + 2H_2O$
A. +6
B. + 2
C. + 4
D. +7
E. +3
Choose the most appropriate answer from the options given below :
(1) D and E only
(2) B and D only
(3) A and B only
(4) B and E only
Answer: (4) B and E only
Explanation:
Given reaction: $3\text{MnO}_4^{2-} + 4\text{H}^+ \rightarrow 2\text{MnO}_4^- + \text{MnO}_2 + 2\text{H}_2\text{O}$
Determine the oxidation states of Mn in each compound:
1. Mn in MnO$_4^{2-}$:
Let the oxidation state of Mn be $x$
$$x + 4(-2) = -2 \Rightarrow x = +6$$
2. Mn in MnO$_4^-$:
$$x + 4(-2) = -1 \Rightarrow x = +7$$
3. Mn in MnO$_2$:
$$x + 2(-2) = 0 \Rightarrow x = +4$$
So, the oxidation states of Mn shown in the reaction are:
+6 (in MnO$_4^{2-}$),
+7 (in MnO$_4^-$),
+4 (in MnO$_2$)
Now evaluate the options:
A. +6 โ shown
B. +2 โ not shown
C. +4 โ shown
D. +7 โ shown
E. +3 โ not shown
Therefore, oxidation states not shown in the reaction are +2 and +3
85. Given below are two statements:
Statement I: The Balmer spectral line for H atom with lowest energy is located at $\dfrac{5}{36} R_H$ cm$^{-1}$.
($R_H$ = Rydberg constant)
Statement II: When the temperature of a blackbody increases, the maxima of the curve (intensity and wavelength) shifts to shorter wavelength.
In the light of the above statements, choose the correct answer from the options given below:
(1) Statement I is true but Statement II is false
(2) Statement I is false but Statement II is true
(3) Both Statement I and Statement II are true
(4) Both Statement I and Statement II are false
Answer:(3) Both Statement I and Statement II are true
Explanation:
Statement I: The Balmer series corresponds to electronic transitions ending at $n_2 = 2$ in the hydrogen atom.
The lowest energy (longest wavelength) transition in the Balmer series is from $n_1 = 3$ to $n_2 = 2$.
Using the Rydberg formula:
$\bar{\nu} = R_H \left( \frac{1}{n_2^2} – \frac{1}{n_1^2} \right)$
Substitute $n_1 = 3$, $n_2 = 2$:
$\bar{\nu} = R_H \left( \frac{1}{4} – \frac{1}{9} \right) = R_H \left( \frac{5}{36} \right)$
This matches the value given in Statement I.
So, Statement I is true.
Statement II:
According to Wienโs Displacement Law: $\lambda_{\text{max}} \propto \frac{1}{T}$
As temperature increases, $\lambda_{\text{max}}$ decreases, meaning the peak shifts to shorter wavelengths.
So, Statement II is also true.
Thus, correct answer is option (3) Both Statement I and Statement II are true.
Chemistry : Section – B
86. Identify D in the following sequences of reations:

(1) n-propyl alcohol
(2) isopropyl alcohol
(3) propanal
(4) propionic acid
Answer: (1) n-propyl alcohol
Explanation:
The given reaction sequence is:
CH$_3$CH$_2$CH$_2$OH $\xrightarrow{P + I_2}$ A
A $\xrightarrow{Mg,\ dry\ ether}$ B
B + HCHO $\rightarrow$ C
C $\xrightarrow{H_2O}$ D (major)
Step 1: CH$_3$CH$_2$CH$_2$OH reacts with phosphorus and iodine to form propyl iodide:
$$\text{CH}_3\text{CH}_2\text{CH}_2\text{I} \quad (A)$$
Step 2: Alkyl iodide reacts with magnesium in dry ether to form a Grignard reagent:
$$\text{CH}_3\text{CH}_2\text{CH}_2\text{MgI} \quad (B)$$
Step 3: Grignard reagent reacts with formaldehyde (HCHO), followed by hydrolysis:
$\text{CH}_3\text{CH}_2\text{CH}_2\text{MgI} + \text{HCHO} \rightarrow \text{CH}_3\text{CH}_2\text{CH}_2\text{CH}_2\text{OMgI}$
$\text{CH}_3\text{CH}_2\text{CH}_2\text{CH}_2\text{OMgI} + H_2O \rightarrow \text{CH}_3\text{CH}_2\text{CH}_2\text{CH}_2\text{OH}$
The final product D is n-propyl alcohol.
Therefore, the correct answer is option (1) n-propyl alcohol
87. Identify the incorrect statement.
(1) PEt$_3$ and AsPh$_3$ as ligands can form $d \pi$-$d \pi$ bond with transition metals
(2) The N โ N single bond is as strong as the P โ P single bond
(3) Nitrogen has unique ability to form $p \pi$-$p \pi$ multiple bonds with nitrogen, carbon and oxygen
(4) Nitrogen cannot form $d \pi$-$p \pi$ bond as other heavier elements of its group
Answer: (2) The N โ N single bond is as strong as the P โ P single bond
Explanation:
Statement (1):
PEt$_3$ and AsPh$_3$ are soft ligands and can form $d\pi$โ$d\pi$ bonds with transition metals.
This is correct.
Statement (2):
This is incorrect. The NโN single bond is much **weaker** than the PโP single bond.
Reason: Lone pair repulsion on adjacent nitrogen atoms weakens the NโN bond, making it unstable.
Bond energy of NโN is significantly lower than that of PโP.
Statement (3):
Nitrogen indeed has the ability to form strong $p\pi$โ$p\pi$ multiple bonds with elements like nitrogen, carbon, and oxygen.
Example: NโกN, CโกN, N=O.
This is correct.
Statement (4):
Nitrogen does not form $d\pi$โ$p\pi$ bonds because it lacks low-energy d-orbitals.
Heavier elements like phosphorus, arsenic, etc., can form $d\pi$โ$p\pi$ bonds.
This is correct.
Therefore, the incorrect statement is: The NโN single bond is as strong as the PโP single bond
88. Match List – I with List – II:
| List – I (Test/reagent) | List – II (Radical identified) |
| A. Lake Test | I. $NO^-_3$ |
| B. Nesslerโs Reagent | II. $Fe^{3+}$ |
| C. Potassium sulphocyanide | III. $Al^{3+}$ |
| D. Brown Ring Test | IV. $NH^+_4$ |
Choose the correct answer from the options given below :
(1) A-IV, B-II, C-III, D-I
(2) A-II, B-IV, C-III, D-I
(3) A-II, B-III, C-IV, D-I
(4) A-III, B-IV, C-II, D-I
Answer: (4) A-III, B-IV, C-II, D-I
Explanation:
Correct Matching:
A. Lake Test identifies $Al^{3+}$
B. Nesslerโs Reagent identifies $NH_4^+$
C. Potassium sulphocyanide identifies $Fe^{3+}$
D. Brown Ring Test identifies $NO_3^-$
So the correct matching is: A – III, B – IV, C – II, D – I
Therefore, the correct answer is option (4) A-III, B-IV, C-II, D-I
89. Match List – I with List – II:
| List – I (Molecule) | List – II Bond enthalpy (kJ mol$^{-1}$) |
| A. HCL | I. 435.8 |
| B. $N_2$ | II. 498 |
| C. $H_2$ | III. 946.0 |
| D. $O_2$ | IV. 431.0 |
Choose the correct answer from the options given below:
(1) A-III, B-IV, C-I, D-II
(2) A-IV, B-I, C-III, D-II
(3) A-IV, B-III, C-II, D-I
(4) A-IV, B-III, C-I, D-II
Answer: (4) A-IV, B-III, C-I, D-II
Explanation:
Correct Matching:
A. HCl has bond enthalpy $435.8$ kJ mol$^{-1}$
B. N_2 has bond enthalpy $946.0$ kJ mol$^{-1}$
C. H_2 has bond enthalpy $498$ kJ mol$^{-1}$
D. O_2 has bond enthalpy $431.0$ kJ mol$^{-1}$
So the correct matching is:
A – I, B – III, C – II, D – IV
Therefore, the correct answer is option (4) A-IV, B-III, C-I, D-II
90. The standard cell potential of the following cell Zn|Zn$^{2+}$(aq)|Fe$^{2+}$(aq)|Fe is 0.32 V. Calculate the standard Gibbs energy change for the reaction:
Zn(s) + Fe$^{2+}$(aq) โ Zn$^{2+}$(aq) + Fe(s)
(Given: 1 F = 96487 C)
(1) โ61.75 kJ mol$^{-1}$
(2) +5.006 kJ mol$^{-1}$
(3) โ5.006 kJ mol$^{-1}$
(4) +61.75 kJ mol$^{-1}$
Answer: (1) โ61.75 kJ mol$^{-1}$
Explanation:
To calculate the standard Gibbs free energy change, use the formula:
$$\Delta G^\circ = -nFE^\circ_{\text{cell}}$$
Given:
$n = 2$ (electrons transferred from Zn to Fe)
$F = 96487$ C mol$^{-1}$
$E^\circ_{\text{cell}} = 0.32$ V
Now substitute the values:
$\Delta G^\circ = -2 \times 96487 \times 0.32$
$\Delta G^\circ = -61751.68$ J mol$^{-1}$
Convert to kJ mol$^{-1}$:
$\Delta G^\circ = -61.75$ kJ mol$^{-1}$
So, the standard Gibbs energy change is:
$$\Delta G^\circ = -61.75\ \text{kJ mol}^{-1}$$
Therefore, the correct answer is option (1) โ61.75 kJ mol$^{-1}$
91.
| List-I Solid salt treated with dil. H$_2$SO$_4$ | List-II Anion detected |
| A. effervescence of colourless gas | I. NO$_2^-$ |
| B. gas with smell of rotten egg | II. CO$_3^{2-}$ |
| C. gas with pungent smell | III. S$^{2-}$ |
| D. brown fumes | IV. SO$_3^{2-}$ |
Choose the correct answer from the options given below:
(1) A-II, B-III, C-IV, D-I
(2) A-IV, B-III, C-II, D-I
(3) A-I, B-II, C-III, D-IV
(4) A-II, B-III, C-I, D-IV
Answer: (1) A-II, B-III, C-IV, D-I
Explanation:
A. Effervescence of colourless gas indicates CO$_2$ โ Anion: CO$_3^{2-}$
B. Rotten egg smell indicates H$_2$S gas โ Anion: S$^{2-}$
C. Pungent smell indicates SO$_2$ gas โ Anion: SO$_3^{2-}$
D. Brown fumes (NO$_2$ gas) โ Anion: NO$_2^-$
So, the correct matching is: A – II, B – III, C – IV, D – I
Therefore, the correct answer is option (1) A-II, B-III, C-IV, D-I
92. The ratio of solubility of AgCl in 0.1 M KCl solution to the solubility of AgCl in water is:
(Given : Solubility product of AgCl = 10$^{-10}$
(1) 10$^{-4}$
(2) 10$^{-6}$
(3) 10$^{-9}$
(4) 10$^{-5}$
Answer: (1) 10$^{-4}$
Explanation:
We are given:
Solubility product of AgCl is $K_{sp} = 10^{-10}$
Let us calculate:
1. Solubility of AgCl in water:
AgCl dissociates as:
AgCl โ Ag$^+$ + Cl$^-$
In pure water: $[Ag^+] = [Cl^-] = s$
So,
$$K_{sp} = s^2$$
$$s = \sqrt{10^{-10}} = 10^{-5}$$
2. Solubility of AgCl in 0.1 M KCl solution:
In this case, $[Cl^-] = 0.1$ M from KCl.
Let the solubility be $s’$, so $[Ag^+] = s’$
Now,
$$K_{sp} = s’ \times 0.1$$
$$s’ = \dfrac{10^{-10}}{0.1} = 10^{-9}$$
3. Ratio of solubilities:
$$\dfrac{s’}{s} = \dfrac{10^{-9}}{10^{-5}} = 10^{-4}$$
Therefore, the correct answer is option(1) 10$^{-4}$
93. On complete combustion, 0.3 g of an organic compound gave 0.2 g of CO$_2$ and 0.1 g of H$_2$O. The percentage composition of carbon and hydrogen in the compound, respectively, is:
(1) 4.07% and 15.02%
(2) 18.18% and 3.70%
(3) 15.02% and 4.07%
(4) 3.70% and 18.18%
Answer: (2) 18.18% and 3.70%
Explanation:
Given:
Mass of organic compound = 0.3 g
Mass of CO$_2$ formed = 0.2 g
Mass of H$_2$O formed = 0.1 g
Step 1: Calculate mass of carbon
Molar mass of CO$_2$ = 44 g/mol Each mole of CO$_2$ contains 12 g of carbonSo, mass of carbon in 0.2 g of CO$_2$:
$$\text{Mass of C} = \dfrac{12}{44} \times 0.2 = 0.0545\ \text{g}$$
Step 2: Calculate mass of hydrogen
Molar mass of H$_2$O = 18 g/mol Each mole of H$_2$O contains 2 g of hydrogen
So, mass of hydrogen in 0.1 g of H$_2$O:
$$\text{Mass of H} = \dfrac{2}{18} \times 0.1 = 0.0111\ \text{g}$$
Step 3: Calculate percentage composition
Percentage of carbon:
$$\dfrac{0.0545}{0.3} \times 100 = 18.18\%$$
Percentage of hydrogen:
$$\dfrac{0.0111}{0.3} \times 100 = 3.70\%$$
Final Answer: Carbon = 18.18%, Hydrogen = 3.70%
Therefore, the correct answer is option (2) 18.18% and 3.70%
94. The following reaction method:

is not suitable for the preparation of the corresponding haloarene products, due to high reactivity of halogen, when X is:
(1) F
(2) I
(3) CI
(4) Br
Answer: (1) F
Explanation:
The given reaction is:
Toluene + X$_2$ (in presence of Fe, dark) gives ortho and para halotoluene.
This is an example of electrophilic aromatic substitution.
This method is not suitable when the halogen X is fluorine.
Reason:
Fluorine is extremely reactive. Direct halogenation with F$_2$ is too vigorous and uncontrollable. It may lead to side reactions, over-fluorination, or even ring destruction.
Therefore, fluorination of aromatic rings is not carried out by this method. Instead, special methods such as the BalzโSchiemann reaction are used for introducing fluorine into aromatic rings.
On the other hand, Cl$_2$, Br$_2$, and even I$_2$ can be used for controlled halogenation in the presence of Lewis acid catalysts like Fe or FeCl$_3$.
Therefore, the correct answer is option (1) F
95. The alkane that can be oxidized to the corresponding alcohol by KMnO$_4$ as per the equation

is, when:
(1) R$_1$ = H; R$_2$ = H; R$_3$ = H
(2) R$_1$ = CH$_3$; R$_2$ = CH$_3$; R$_3$ = CH$_3$
(3) R$_1$ = CH$_3$; R$_2$ = H; R$_3$ = H
(4) R$_1$ = CH$_3$; R$_2$ = CH$_3$; R$_3$ = H
Answer: (2) R$_1$ = CH$_3$; R$_2$ = CH$_3$; R$_3$ = CH$_3$
96. For the following reaction at 300 K:
$ A_2(g) + 3B_2(g) \rightarrow 2AB_3(g)$
The enthalpy change is +15 kJ, then the internal energy change is:
(1) 19988.4 J
(2) 200 J
(3) 1999 J
(4) 1.9988 kJ
Answer: (1) 19988.4 J
97. Rate constants of a reaction at 500 K and 700 K are 0.04 s$^{-1}$ and 0.14 s$^{-1}$, respectively; then, activation energy of the reaction is:
(Given: log3.5 = 0.5441, R = 8.31 J K$^{-1}$ mol$^{-1}$)
(1) 18230 J
(2) 18500 J
(3) 18219 J
(4) 18030 J
Answer: (3) 18219 J
Explanation:
Given:
$k_1 = 0.04$ s$^{-1}$ at $T_1 = 500$ K
$k_2 = 0.14$ s$^{-1}$ at $T_2 = 700$ K
$R = 8.31$ J K$^{-1}$ mol$^{-1}$
$\log(3.5) = 0.5441$
Using the Arrhenius equation:
$$\log\left(\frac{k_2}{k_1}\right) = \frac{E_a}{2.303R} \left( \frac{1}{T_1} – \frac{1}{T_2} \right)$$
Substituting values:
$$\log\left(\frac{0.14}{0.04}\right) = \frac{E_a}{2.303 \times 8.31} \left( \frac{1}{500} – \frac{1}{700} \right)$$
Now,
$$\log(3.5) = 0.5441$$
$$\frac{1}{500} – \frac{1}{700} = \frac{2}{3500} = 0.0005714$$
Now solve for $E_a$:
$$0.5441 = \frac{E_a}{2.303 \times 8.31} \times 0.0005714$$
$$E_a = \frac{0.5441 \times 2.303 \times 8.31}{0.0005714}$$
$$E_a = \frac{10.393}{0.0005714} = 18218.96 \text{ J}$$
Therefore, the correct answer is option (3) 18219 J
98. Mass of glucose (C$_6$H$_{12}$O$_6$) required to be dissolved to prepare one litre of its solution which is isotonic with 15 g L$^{-1}$ solution of urea (NH$_2$CONH$_2$) is
(Given: Molar mass in g mol$^{-1}$ C : 12, H : 1, O : 16, N : 14)
(1) 55 g
(2) 15 g
(3) 30 g
(4) 45 g
Answer: (4) 45 g
Explanation:
We are given:
– 15 g/L solution of urea (NH$_2$CONH$_2$)
– Need to prepare 1 L of glucose (C$_6$H$_{12}$O$_6$) solution isotonic with it
– Isotonic solutions have the same number of moles of solute particles per unit volume (same molarity)
Step 1: Calculate molar mass of urea (NH$_2$CONH$_2$): C = 12, O = 16, N = 14, H = 1
Molar mass of urea = $1 \times 12 + 1 \times 16 + 2 \times 14 + 4 \times 1 = 60$ g/mol
So, moles of urea in 1 L:
$$\text{Moles of urea} = \frac{15}{60} = 0.25 \text{ mol}$$
To be isotonic, glucose solution must also have 0.25 mol in 1 L.
Step 2: Calculate molar mass of glucose (C$_6$H$_{12}$O$_6$): C = 12, H = 1, O = 16
Molar mass of glucose = $6 \times 12 + 12 \times 1 + 6 \times 16 = 180$ g/mol
Mass of glucose required for 0.25 mol:
$$\text{Mass} = 0.25 \times 180 = 45 \text{ g}$$
Therefore, the correct answer is option (4) 45 g
99. [Mn$_2$(CO)$_{10}$] and [Co$_2$(CO)$_8$] structures have:
A. Metal-Metal linkage
B. Terminal CO groups
C. Bridging CO groups
D. Metal in zero oxidation state
Choose the correct answer from the options given below:
(1) Only A, B, C
(2) Only B, C, D
(3) Only A, C, D
(4) Only A, B, D
Answer: (4) Only A, B, D
Explanation:
Given complexes:
– [Mn$_2$(CO)$_{10}$]
– [Co$_2$(CO)$_8$]
We need to identify which of the following features are present:
A. Metal-Metal linkage
B. Terminal CO groups
C. Bridging CO groups
D. Metal in zero oxidation state
Letโs analyze both complexes:
1. [Mn$_2$(CO)$_{10}$]
– Has a MnโMn bond โ A is correct
– All CO ligands are terminal โ B is correct
– No bridging CO groups โ C is incorrect
– Oxidation state of Mn is 0 โ D is correct
2. [Co$_2$(CO)$_8$]
– Has a CoโCo bond โ A is correct
– Contains both terminal and bridging CO groups โ B and C are correct
– Oxidation state of Co is 0 โ D is correct
Summary:
– A is true for both – B is true for both – C is true only for Co complex – D is true for both
Since [Mn$_2$(CO)$_{10}$] does not have bridging CO groups, statement C is not common to both structures.
Hence, the correct statements common to both complexes are:
A. Metal-Metal linkage
B. Terminal CO groups
D. Metal in zero oxidation state
So, correct answer is option (4) Only A, B, D
100. Methyl group attached to a positively charged carbon atom stabilizes the carbocation due to:
(1) โI inductive effect
(2) electromeric effect
(3) hyperconjugation
(4) mesomeric effect
Answer: (3) hyperconjugation
Explanation:
Methyl group attached to a positively charged carbon atom stabilizes the carbocation due to:
Letโs analyze the options:
(1) $-I$ inductive effect: Methyl group shows $+I$ (electron-donating) inductive effect, not $-I$. So this is incorrect.
(2) Electromeric effect: This effect occurs in the presence of a reagent and involves complete transfer of $\pi$-electrons. Not applicable here.
(3) Hyperconjugation: This is the correct answer. Hyperconjugation involves delocalization of electrons from adjacent CโH bonds of the methyl group into the empty p-orbital of the carbocation. This delocalization stabilizes the positive charge.
(4) Mesomeric effect: This involves $\pi$-electron delocalization, typically in conjugated systems with double bonds or lone pairs. Not relevant to methyl group stabilization.
Therefore, the methyl group stabilizes a carbocation due to: hyperconjugation So, correct answer is option (3) hyperconjugation



