Physics : Section – A
1. Two hollow conducting spheres of radii $R_1$ and $R_2$ ($R_1 \gg R_2$) have equal charges. The potential would be:
(1) more on smaller sphere
(2) equal on both the spheres
(3) dependent on the material property of the sphere
(4) more on bigger sphere
Answer: (1)
Explanation:
Let two hollow conducting spheres have radii $R_1$ and $R_2$ with $R_1 \gg R_2$, and let both carry equal charges $Q$.
The electric potential $V$ on the surface of a conducting sphere is given by:
$$V = \frac{1}{4\pi\varepsilon_0} \cdot \frac{Q}{R}$$
From the formula, potential $V$ is inversely proportional to the radius $R$ of the sphere.
Since $R_2$ is much smaller than $R_1$, the potential on the smaller sphere will be:
$$V_2 = \frac{1}{4\pi\varepsilon_0} \cdot \frac{Q}{R_2}$$
which is greater than
$$V_1 = \frac{1}{4\pi\varepsilon_0} \cdot \frac{Q}{R_1}$$
Therefore, potential is more on the smaller sphere when both spheres carry the same charge.
Thus, correct answer is option (1) more on smaller sphere.
2. The angular speed on a flywheel moving with uniform angular acceleration changes from 1200 rpm to 3120 rpm in 16 seconds. The angular acceleration in rad/s$^2$ is:
(1) $4\pi$
(2) $12\pi$
(3) $104\pi$
(4) $2\pi$
Answer: (1) $4\pi$
Explanation:
We are given: Initial angular speed $\omega_1 = 1200$ rpm, Final angular speed $\omega_2 = 3120$ rpm, and time $t = 16$ seconds.
Convert rpm to rad/s:
$$\omega_1 = 1200 \times \frac{2\pi}{60} = 40\pi \, \text{rad/s}, \quad \omega_2 = 3120 \times \frac{2\pi}{60} = 104\pi \, \text{rad/s}$$
Use the formula:
$$\alpha = \frac{\omega_2 – \omega_1}{t} = \frac{104\pi – 40\pi}{16} = \frac{64\pi}{16} = 4\pi \, \text{rad/s}^2$$
Thus, correct answer is option (1) 4ฯ
3.

In the given circuits (a), (b) and (c) the the potential drop across the two p-n junctions are equal in:
(1) Circuit (b) only
(2) Circuit (c) only
(3) Both circuits (a) and (c)
(4) Circuit (a) only
Answer: (3) Both circuits (a) and (c)
4. Two objects of mass 10 kg and 20 kg respectively are connected to the two ends of a rigid rod of length 10 m with negligible mass. The distance of the center of mass of the system from the 10 kg mass is:
(1) $\dfrac{20}{3}$ m
(2) 10 m
(3) 5 m
(4) $\dfrac{10}{3}$ m
Answer: (1) $\dfrac{20}{3}$ m
Let the two masses be:
- $m_1 = 10$ kg (placed at position $x = 0$)
- $m_2 = 20$ kg (placed at position $x = 10$ m)
- The length of the rod is 10 m
We are to find the distance of the center of mass (COM) from the 10 kg mass, i.e., from $x = 0$.
The formula for the position of center of mass is:
$$x_{cm} = \frac{m_1 x_1 + m_2 x_2}{m_1 + m_2}$$
Substitute the values:
$$x_{cm} = \frac{10 \cdot 0 + 20 \cdot 10}{10 + 20} = \frac{200}{30} = \frac{20}{3} \, \text{m}$$
So, the center of mass is located $\frac{20}{3}$ meters from the 10 kg mass.
Thus, correct answer is option (1) $\dfrac{20}{3}$ m
5. A biconvex lens has radii of curvature, 20 cm each. If the refractive index of the material of the lens is 1.5, the power of the lens is:
(1) +20 D
(2) +5 D
(3) infinity
(4) +2 D
Answer: (2) +5 D
Explanation:
Given:
- Radius of curvature: $R_1 = +20$ cm, $R_2 = -20$ cm (since it’s a biconvex lens)
- Refractive index: $\mu = 1.5$
- Lens is in air, so $\mu_{air} = 1$
Use the Lens Maker’s Formula:
$$\frac{1}{f} = (\mu – 1) \left( \frac{1}{R_1} – \frac{1}{R_2} \right)$$
Substitute the values:
$$
\frac{1}{f} = (1.5 – 1) \left( \frac{1}{20} – \frac{1}{-20} \right)
= 0.5 \left( \frac{1}{20} + \frac{1}{20} \right)
= 0.5 \cdot \frac{2}{20}
= \frac{1}{20} \, \text{cm}^{-1}
$$
Convert to meters: $ f = 20 \, \text{cm} = 0.2 \, \text{m}$
Now, use the formula for Power of lens:
$$P = \frac{100}{f(\text{in cm})} = \frac{100}{20} = +5\, D$$
Thus, correct answer is option (2) +5D
6. A spherical ball is dropped in a long column of a highly viscous liquid.
The curve in the graph shown, which represents the speed of the ball ($v$) as a function of time ($t$) is:
(1) B
(2) C
(3) D
(4) A
Answer: (1) B
Explanation: When a spherical ball is dropped in a highly viscous liquid, it experiences:
- Gravitational force downward,
- Buoyant force upward,
- Viscous drag force upward (opposing motion)
Initially, the ball accelerates due to gravity. As its speed increases, the viscous drag force also increases. Eventually, the drag force balances the net force, and the ball moves with constant terminal velocity.
This means the speed increases rapidly at first, and then gradually approaches a constant value (terminal velocity) asymptotically.
So, the correct velocity-time graph is the one that shows a curve rising quickly at first and then leveling off โ that is: Curve B
Thus, correct answer is option (1) B
7. The ratio of the radius of gyration of a thin uniform disc about an axis passing through its centre and normal to its plane to the radius of gyration of the disc about its diameter is:
(1) $\sqrt{2} : 1$
(2) $4 : 1$
(3) $1 : \sqrt{2}$
(4) $2 : 1$
Answer: (1) $\sqrt{2} : 1$
Explanation:
We are asked to find the ratio of the radius of gyration of a thin uniform disc:
- About an axis through its center and normal to its plane (i.e., perpendicular axis)
- To that about its diameter (i.e., in-plane axis)
The radius of gyration $K$ is related to the moment of inertia $I$ and mass $M$ by:
$$K = \sqrt{\frac{I}{M}}$$
For a thin uniform disc of mass $M$ and radius $R$:
- Moment of inertia about axis normal to plane through center:
$$I_1 = \frac{1}{2}MR^2 \Rightarrow K_1 = \sqrt{\frac{I_1}{M}} = \sqrt{\frac{1}{2}R^2} = \frac{R}{\sqrt{2}}$$ - Moment of inertia about diameter:
$$I_2 = \frac{1}{4}MR^2 \Rightarrow K_2 = \sqrt{\frac{I_2}{M}} = \sqrt{\frac{1}{4}R^2} = \frac{R}{2}$$
Now take the ratio:
$$\frac{K_1}{K_2} = \frac{\frac{R}{\sqrt{2}}}{\frac{R}{2}} = \frac{2}{\sqrt{2}} = \sqrt{2} : 1$$
Thus, correct answer is option (1) $\sqrt{2} : 1$
8. A shell of mass $m$ is at rest initially. It explodes into three fragments having mass in the ratio $2 : 2 : 1$. If the fragments having equal mass fly off along mutually perpendicular directions with speed $v$, the speed of the third (lighter) fragment is:
(1) $\sqrt{2}\ v$
(2) $2\sqrt{2}\ v$
(3) $3\sqrt{2}\ v$
(4) $v$
Answer: (2) $2\sqrt{2}\ v$
Explanation:
Let the total mass be $m$ and the three fragments have mass in the ratio $2:2:1$.
Let the actual masses be: $$2m_0, 2m_0, m_0$$
Assume the two heavier fragments move at speed $v$ along perpendicular directions:
- Fragment 1: along x-axis โ momentum = $$2m_0 \cdot v \hat{i}$$
- Fragment 2: along y-axis โ momentum = $$2m_0 \cdot v \hat{j}$$
Let the third (lighter) fragment move with velocity $$\vec{v}_3$$, and momentum $$\vec{p}_3 = m_0 \cdot \vec{v}_3$$
By conservation of momentum:
$$2m_0 v \hat{i} + 2m_0 v \hat{j} + m_0 \vec{v}_3 = 0$$
Solving:
$$\vec{v}_3 = -2v \hat{i} – 2v \hat{j}$$
Magnitude:
$$v_3 = \sqrt{(-2v)^2 + (-2v)^2} = \sqrt{4v^2 + 4v^2} = \sqrt{8v^2} = 2\sqrt{2}v$$
Thus, correct answer is option (2) $2\sqrt{2}v$
9. A long solenoid of radius 1 mm has 100 turns per mm.
If 1 A current flows in the solenoid, the magnetic field strength at the centre of the solenoid is:
(1) $12.56 \times 10^{-2}$ T
(2) $12.56 \times 10^{-4}$ T
(3) $6.28 \times 10^{-4}$ T
(4) $6.28 \times 10^{-2}$ T
Answer: (1) $12.56 \times 10^{-2}$ T
Given:
- Radius of solenoid = 1 mm (not required here, since magnetic field inside a long solenoid is independent of radius)
- Number of turns per mm = 100
- Current, $I = 1$ A
Convert turns per mm to turns per meter:
$$n = 100 \, \text{turns/mm} = 100 \times 1000 = 10^5 \, \text{turns/m}$$
The formula for magnetic field at the center of a long solenoid is:
$$B = \mu_0 n I$$
Where:
$$\mu_0 = 4\pi \times 10^{-7} \, \text{Tm/A}$$
Substitute the values:
$$B = 4\pi \times 10^{-7} \times 10^5 \times 1 = 4\pi \times 10^{-2} \, \text{T}$$
Now calculate:
$$B = 12.56 \times 10^{-2} \, \text{T}$$
Thus, correct answer is option (1) $12.56 \times 10^{-2}$ T
10. Let $T_1$ and $T_2$ be the energy of an electron in the first and second excited states of hydrogen atom, respectively. According to the Bohr’s model of an atom, the ratio $T_1 : T_2$ is:
(1) $4 : 1$
(2) $4 : 9$
(3) $9 : 4$
(4) $1 : 4$
Answer: (3) $9 : 4$
Explanation:
According to Bohr’s model, the energy of an electron in the $n^{th}$ orbit of hydrogen atom is given by:
$$E_n = -\frac{13.6}{n^2} \, \text{eV}$$
The first excited state corresponds to $n = 2$, so:
$$T_1 = E_2 = -\frac{13.6}{2^2} = -\frac{13.6}{4} \, \text{eV}$$
The second excited state corresponds to $n = 3$, so:
$$T_2 = E_3 = -\frac{13.6}{3^2} = -\frac{13.6}{9} \, \text{eV}$$
Now take the ratio:
$$\frac{T_1}{T_2} = \frac{-13.6/4}{-13.6/9} = \frac{9}{4}$$
Thus, correct answer is option (3) 9 : 4
11. A light ray falls on a glass surface of refractive index $\sqrt{3}$, at an angle $60^\circ$.
The angle between the refracted and reflected rays would be:
(1) $60^\circ$
(2) $90^\circ$
(3) $120^\circ$
(4) $30^\circ$
Answer: (2) $90^\circ$
Given:
- Angle of incidence, $$i = 60^\circ$$
- Refractive index of glass, $$\mu = \sqrt{3}$$
- Refractive index of air is $$\mu_1 = 1$$
Use Snell’s Law:
$$\mu_1 \sin i = \mu_2 \sin r$$
Substitute the values:
$$1 \cdot \sin 60^\circ = \sqrt{3} \cdot \sin r$$
$$\frac{\sqrt{3}}{2} = \sqrt{3} \cdot \sin r$$
Divide both sides by $$\sqrt{3}$$:
$$\frac{1}{2} = \sin r \Rightarrow r = 30^\circ$$
The angle of reflection is equal to the angle of incidence, so:
$$\theta_{\text{reflected}} = 60^\circ$$
Now, the angle between the reflected and refracted rays is:
$$\theta = \theta_{\text{reflected}} + \theta_{\text{refracted}} = 60^\circ + 30^\circ = 90^\circ$$
Thus, correct answer is option (2) 90ยฐ
12. If a soap bubble expands, the pressure inside the bubble:
(1) increases
(2) remains the same
(3) is equal to the atmospheric pressure
(4) decreases
Answer: (4) decreases
Explanation:
The excess pressure inside a soap bubble (which has two surfaces) is given by:
$$\Delta P = \frac{4T}{r}$$
Where:
- $T$ is the surface tension
- $r$ is the radius of the bubble
As the soap bubble expands, the radius $r$ increases, so:
$$\Delta P \propto \frac{1}{r}$$
This means the pressure inside the bubble decreases as it expands.
Thus, correct answer is option (4) decreases
13. Plane angle and solid angle have:
(1) Dimensions but no units
(2) No units and no dimensions
(3) Both units and dimensions
(4) Units but no dimensions
Answer: (4) Units but no dimensions
Explanation:
Plane angle and solid angle are both dimensionless physical quantities because they are defined as the ratio of two quantities of the same dimension.
- Plane angle is defined as:
$$\theta = \frac{\text{arc length}}{\text{radius}}$$
Both arc length and radius have dimension of length, so the ratio is dimensionless. - Solid angle is defined as:
$$\Omega = \frac{\text{area}}{r^2}$$
Both area and $r^2$ have dimension of $L^2$, so the ratio is again dimensionless.
However, they do have units:
- Plane angle unit: radian (rad)
- Solid angle unit: steradian (sr)
Thus, they have units but no dimensions.
Thus, correct answer is option (4) Units but no dimensions
14. When light propagates through a material medium of relative permittivity $\epsilon_r$ and relative permeability $\mu_r$, the velocity of light $v$ is given by (where $c$ = velocity of light in vacuum):
(1) $v = \sqrt{\dfrac{\mu_r}{\epsilon_r}}$
(2) $v = \sqrt{\dfrac{\epsilon_r}{\mu_r}}$
(3) $v = \dfrac{c}{\sqrt{\epsilon_r \mu_r}}$
(4) $v = c$
Answer: (3) $v = \dfrac{c}{\sqrt{\epsilon_r \mu_r}}$
Explanation:
The velocity of light in a material medium is given by:
$$v = \frac{1}{\sqrt{\mu \varepsilon}}$$
Where:
- $\mu$ is the absolute permeability of the medium
- $\varepsilon$ is the absolute permittivity of the medium
For a medium with relative permeability $\mu_r$ and relative permittivity $\varepsilon_r$, we write:
$$\mu = \mu_r \mu_0, \quad \varepsilon = \varepsilon_r \varepsilon_0$$
Substitute into the equation:
$$v = \frac{1}{\sqrt{\mu_r \mu_0 \cdot \varepsilon_r \varepsilon_0}} = \frac{1}{\sqrt{\mu_r \varepsilon_r}} \cdot \frac{1}{\sqrt{\mu_0 \varepsilon_0}}$$
But, $\frac{1}{\sqrt{\mu_0 \varepsilon_0}} = c$
So, $v = \frac{c}{\sqrt{\varepsilon_r \mu_r}}$
Thus, correct answer is option (3) (\displaystyle v = \frac{c}{\sqrt{\varepsilon_r \mu_r}})
15. Two resistors of resistance, 100 $\Omega$ and 200 $\Omega$ are connected in parallel in an electrical circuit.
The ratio of the thermal energy developed in 100 $\Omega$ to that in 200 $\Omega$ in a given time is:
(1) 2 : 1
(2) 1 : 4
(3) 4 : 1
(4) 1 : 2
Answer: (1) 2 : 1
Given:
- Two resistors: $$R_1 = 100\, \Omega$$ and $$R_2 = 200\, \Omega$$
- Both are connected in parallel
- We are to find the ratio of thermal energy (heat) developed in $$R_1$$ to that in $$R_2$$ over a given time
In parallel connection, the voltage across both resistors is the same.
Thermal energy (heat) developed in a resistor over time is:
$$H = \frac{V^2}{R} \cdot t$$
Let the common voltage be $$V$$ and time be the same for both. Then:
$$H_1 = \frac{V^2}{100} \cdot t,\quad H_2 = \frac{V^2}{200} \cdot t$$
Now take the ratio:
$$\frac{H_1}{H_2} = \frac{\frac{V^2}{100}}{\frac{V^2}{200}} = \frac{200}{100} = 2:1$$
Thus, correct answer is option (1) 2 : 1
16. The graph which shows the variation of the de Broglie wavelength ($\lambda$) of a particle and its associated momentum ($p$) is:
(1)

(2)

(3)

(4)

Answer: (3)
17. A square loop of side 1 m and resistance 1 $\Omega$ is placed in a magnetic field of 0.5 T.
If the plane of the loop is perpendicular to the direction of magnetic field, the magnetic flux through the loop is:
(1) 0.5 weber
(2) 1 weber
(3) Zero weber
(4) 2 weber
Answer: (1) 0.5 weber
Given:
- Side of square loop = $$1\, \text{m}$$
- Magnetic field strength = $$B = 0.5\, \text{T}$$
- The plane of the loop is perpendicular to the magnetic field
Since the plane is perpendicular to the magnetic field, the area vector is parallel to the magnetic field direction.
Magnetic flux $$\phi$$ is given by: $\phi = B \cdot A \cdot \cos\theta$
Where:
- $$A$$ is area of loop: $$A = 1 \times 1 = 1\, \text{m}^2$$
- $$\theta$$ is the angle between magnetic field and normal to the loop
Here, $$\theta = 0^\circ$$, so: $\phi = 0.5 \cdot 1 \cdot \cos 0^\circ = 0.5 \cdot 1 \cdot 1 = 0.5\, \text{weber}$
Thus, correct answer is option (1) 0.5 weber
18. The dimensions $[\text{MLT}^{-2}\ \text{A}^{-2}]$ belong to the:
(1) self inductance
(2) magnetic permeability
(3) electric permittivity
(4) magnetic flux
Answer: (2) magnetic permeability
Explanation:
Given dimensional formula: $[MLT^{-2}A^{-2}]$
Letโs analyze each option:
(1) Self inductance (L): The energy stored in an inductor is:
$$E = \frac{1}{2} L I^2$$
So, $L = \frac{2E}{I^2} \Rightarrow [L] = \frac{[ML^2T^{-2}]}{A^2} = [ML^2T^{-2}A^{-2}]$
โ given dimensions
(2) Magnetic permeability ($\mu$): In the formula for speed of light:
$$c = \frac{1}{\sqrt{\mu \varepsilon}} \Rightarrow \mu \varepsilon = \frac{1}{c^2}$$
Also, $[\varepsilon] = [M^{-1}L^{-3}T^4A^2]$
So, $[\mu] = \frac{1}{[\varepsilon] \cdot [c^2]} = \frac{1}{[M^{-1}L^{-3}T^4A^2] \cdot [L^2T^{-2}]} = [MLT^{-2}A^{-2}]$
This matches the given dimensions.
Thus, correct answer is option (2) magnetic permeability
19. When two monochromatic lights of frequency, $\upsilon$ and $\dfrac{\upsilon}{2}$ are incident on a photoelectric metal, their stopping potential becomes $\dfrac{V_s}{2}$ and $V_s$ respectively. The threshold frequency for this metal is:
(1) $3\upsilon$
(2) $\dfrac{2}{3} \upsilon$
(3) $\dfrac{3}{2} \upsilon$
(4) $2\upsilon$
Answer: Bonus
20. In half wave rectification, if the input frequency is 60 Hz, then the output frequency would be:
(1) 30 Hz
(2) 60 Hz
(3) 120 Hz
(4) Zero
Answer: (2) 60 Hz
Explanation:
In half wave rectification, only one half (positive or negative) of each AC cycle is allowed to pass through, while the other half is blocked.
This means:
- For every cycle of input AC signal, there is one pulse in the output.
- So, the output frequency is the same as the input frequency.
Given:
- Input frequency = $$60\, \text{Hz}$$
- Therefore, output frequency = $$60\, \text{Hz}$$
Thus, correct answer is option (2) 60 Hz
21. An ideal gas undergoes four different processes from the same initial state as shown in the figure below. Those processes are adiabatic, isothermal, isobaric and isochoric. The curve which represents the adiabatic process among 1, 2, 3 and 4 is:

(1) 2
(2) 3
(3) 4
(4) 1
Answer: (1) 2
22. Match List โ I with List โ II
| List – I (Electromagnetic waves) | List โ II (Wavelength) |
| (a) AM radio waves | (i) $10^{-10}$ m |
| (b) Microwaves | (ii) $10^2$ m |
| (c) Infrared radiations | (iii) $10^{-2}$ m |
| (d) X-rays | (iv) $10^{-4}$ m |
Choose the correct answer from the options given below:
(1) (a) โ (iii), (b) โ (ii), (c) โ (i), (d) โ (iv)
(2) (a) โ (iii), (b) โ (iv), (c) โ (ii), (d) โ (i)
(3) (a) โ (ii), (b) โ (iii), (c) โ (iv), (d) โ (i)
(4) (a) โ (iv), (b) โ (iii), (c) โ (ii), (d) โ (i)
Answer: (3) (a) โ (ii), (b) โ (iii), (c) โ (iv), (d) โ (i)
Explanation:
We need to match electromagnetic waves with their approximate wavelength ranges:
From the electromagnetic spectrum:
(a) AM radio waves have the longest wavelengths, typically around $$10^2\, \text{m}$$
โ Match with (ii)
(b) Microwaves have wavelengths around $$10^{-2}\, \text{m}$$
โ Match with (iii)
(c) Infrared radiations have wavelengths around $$10^{-4}\, \text{m}$$
โ Match with (iv)
(d) X-rays have very short wavelengths, around $$10^{-10}\, \text{m}$$
โ Match with (i)
So, the correct matching is:
- (a) โ (ii)
- (b) โ (iii)
- (c) โ (iv)
- (d) โ (i)
Thus, correct answer is option (3) (a โ ii), (b โ iii), (c โ iv), (d โ i)
23. The displacement-time graphs of two moving particles make angles of $30^\circ$ and $45^\circ$ with the x-axis as shown in the figure. The ratio of their respective velocity is:

(1) $1 : 1$
(2) $1 : 2$
(3) $1 : \sqrt{3}$
(4) $\sqrt{3} : 1$
Answer: (3) $1 : \sqrt{3}$
Explanation:
In a displacement-time graph, the slope of the graph gives the velocity of the particle.
Let:
- $$\theta_1 = 30^\circ$$
- $$\theta_2 = 45^\circ$$
Velocity is proportional to the slope, which is:
$$v = \tan(\theta)$$
So,
$$v_1 = \tan(30^\circ) = \frac{1}{\sqrt{3}}, \quad v_2 = \tan(45^\circ) = 1$$
Now take the ratio of their velocities:
$$\frac{v_1}{v_2} = \frac{1/\sqrt{3}}{1} = \frac{1}{\sqrt{3}}$$
So, the ratio of their respective velocities is:
$$1 : \sqrt{3}$$
Thus, correct answer is option (3) 1 : $\sqrt{3}$
24. In a Young’s double slit experiment, a student observes 8 fringes in a certain segment of screen when a monochromatic light of 600 nm wavelength is used.
If the wavelength of light is changed to 400 nm, then the number of fringes he would observe in the same region of the screen is:
(1) 8
(2) 9
(3) 12
(4) 6
Answer: (3) 12
Explanation:
In Young’s double slit experiment, the fringe width is given by: $\beta = \frac{\lambda D}{d}$
Where:
- $\lambda$ is the wavelength of light
- $D$ is the distance between slits and screen
- $d$ is the distance between the two slits
The number of fringes in a fixed region of the screen is inversely proportional to the wavelength: $\text{Number of fringes} \propto \frac{1}{\lambda}$
Let the number of fringes observed with $\lambda_1 = 600\, \text{nm}$ be $N_1 = 8$
Now, for $\lambda_2 = 400\, \text{nm}$: $\frac{N_2}{N_1} = \frac{\lambda_1}{\lambda_2} = \frac{600}{400} = \frac{3}{2}$
So, $N_2 = N_1 \cdot \frac{3}{2} = 8 \cdot \frac{3}{2} = 12$
Thus, correct answer is option (3) 12
25. The peak voltage of the ac source is equal to:
(1) the rms value of the ac source
(2) $\sqrt{2}$ times the rms value of the ac source
(3) $1/\sqrt{2}$ time the rms value of the ac source
(4) the value of voltage supplied to the circuit
Answer: (2) $\sqrt{2}$ times the rms value of the ac source
Explanation:
For an AC source, the relation between peak voltage ($V_0$) and rms voltage ($V_{\text{rms}}$) is: $V_0 = \sqrt{2} \cdot V_{\text{rms}}$
This means the peak value is $\sqrt{2}$ times the rms (root mean square) value.
Thus, correct answer is option (2) $\sqrt{2}$ times the rms value of the ac source
26. If the initial tension on a stretched string is doubled, then the ratio of the initial and final speeds of a transverse wave along the string is:
(1) $\sqrt{2} : 1$
(2) $1 : \sqrt{2}$
(3) $1 : 2$
(4) $1 : 1$
Answer: (2) $1 : \sqrt{2}$
Explanation:
The speed of a transverse wave on a stretched string is given by:
$$v = \sqrt{\frac{T}{\mu}}$$
Where:
- $v$ is the speed of the wave
- $T$ is the tension in the string
- $\mu$ is the linear mass density (which remains constant)
Let the initial tension be $T$ and the final tension be $2T$.
Initial speed: $v_1 = \sqrt{\frac{T}{\mu}}$
Final speed: $v_2 = \sqrt{\frac{2T}{\mu}} = \sqrt{2} \cdot \sqrt{\frac{T}{\mu}} = \sqrt{2} \cdot v_1$
Now, the ratio of initial to final speed is: $\frac{v_1}{v_2} = \frac{1}{\sqrt{2}} = 1 : \sqrt{2}$
Thus, correct answer is option (2) 1 : $\sqrt{2}$
27. Given below are two statements:
Statement I: Biot-Savart’s law gives us the expression for the magnetic field strength of an infinitesimal current element (Id$\ell$) of a current carrying conductor only.
Statement II: Biot-Savart’s law is analogous to Coulomb’s inverse square law of charge $q$, with the former being related to the field produced by a scalar source, Id$\ell$, while the latter being produced by a vector source, $q$.
In light of above statement choose the most appropriate answer from the options given below:
(1) Both statement I and Statement II are incorrect
(2) Statement I is correct and Statement II is incorrect
(3) Statement I is incorrect and Statement II is correct
(4) Both statement I and Statement II are correct
Answer: (2) Statement I is correct and Statement II is incorrect
Explanation:
Statement I: “BiotโSavart’s law gives us the expression for the magnetic field strength of an infinitesimal current element ($Id\ell$) of a current-carrying conductor only.”
This statement is correct.
BiotโSavart law gives the magnetic field $\vec{B}$ due to a small current element as:
$$\vec{B} = \frac{\mu_0}{4\pi} \cdot \frac{I d\ell \sin\theta}{r^2}$$
It applies to infinitesimal current elements and is used to find the net magnetic field by integrating over the conductor.
Statement II: “BiotโSavart’s law is analogous to Coulombโs inverse square law of charge $q$, with the former being related to the field produced by a scalar source $Id\ell$ while the latter being produced by a vector source $q$.”
This statement is incorrect.
The analogy is flawed:
- In Coulombโs law, $q$ is a scalar source producing an electric field.
- In BiotโSavart law, $Id\ell$ is a vector quantity, not scalar.
- So it is not correct to say BiotโSavart uses a scalar source while Coulomb’s law uses a vector source.
Therefore:
- Statement I is correct
- Statement II is incorrect
Thus, correct answer is option (2) Statement I is correct and Statement II is incorrect
28. As the temperature increases, the electrical resistance:
(1) decreases for both conductors and semiconductors
(2) increases for conductors but decreases for semiconductors
(3) decreases for conductors but increases for semiconductors
(4) increases for both conductors and semiconductors
Answer: (2) increases for conductors but decreases for semiconductors
Explanation:
As temperature increases:
- For conductors (like metals):
Resistance increases because the number of collisions between electrons and atoms increases, which increases resistivity. - For semiconductors:
Resistance decreases because more charge carriers (electrons and holes) are generated at higher temperatures, which improves conductivity.
Therefore:
- Resistance increases for conductors
- Resistance decreases for semiconductors
Thus, correct answer is option (2) increases for conductors but decreases for semiconductors.
29. The energy that will be ideally radiated by a 100 kW transmitter in 1 hour is:
(1) $36 \times 10^4\ \text{J}$
(2) $36 \times 10^5\ \text{J}$
(3) $1 \times 10^5\ \text{J}$
(4) $36 \times 10^7\ \text{J}$
Answer: (4) $36 \times 10^7\ \text{J}$
Explanation:
Given:
- Power of the transmitter = $100\, \text{kW} = 100 \times 10^3\, \text{W}$
- Time = $1\, \text{hour} = 60 \times 60 = 3600\, \text{seconds}$
We use the formula:
$$\text{Energy} = \text{Power} \times \text{Time}$$
Substitute the values:
$$E = 100 \times 10^3 \times 3600 = 3.6 \times 10^8\, \text{J}$$
Now express this in the form matching the options:
$$3.6 \times 10^8 = 36 \times 10^7\, \text{J}$$
Thus, correct answer is option (4) $36 \times 10^7\ \text{J}$
30. A body of mass 60 g experiences a gravitational force of 3.0 N, when placed at a particular point. The magnitude of the gravitational field intensity at that point is:
(1) 50 N/kg
(2) 20 N/kg
(3) 180 N/kg
(4) 0.05 N/kg
Answer: (1) 50 N/kg
Explanation:
Given:
Mass of the body = $60\, \text{g} = 0.060\, \text{kg}$
Gravitational force = $F = 3.0\, \text{N}$
Gravitational field intensity is given by:
$$E = \frac{F}{m} = \frac{3.0}{0.060} = 50\, \text{N/kg}$$
Thus, correct answer is option (1) 50 N/kg
31. In the given nuclear reaction, the element X is:
${}_{11}^{22}\text{Na} \rightarrow \text{X} + e^+ + \nu$
(1) ${}_{10}^{23}\text{Ne}$
(2) ${}_{10}^{22}\text{Ne}$
(3) ${}_{12}^{22}\text{Mg}$
(4) ${}_{11}^{23}\text{Na}$
Answer: (2) ${}_{10}^{22}\text{Ne}$
Explanation:
Given nuclear reaction:
$^{22}_{11}\text{Na} \rightarrow X + e^+ + \nu$
This is a beta-plus decay ($\beta^+$), in which a proton is converted into a neutron, emitting a positron ($e^+$) and a neutrino ($\nu$).
In $\beta^+$ decay:
- The mass number remains the same
- The atomic number decreases by 1
So for:
- Initial atom: $^{22}_{11}\text{Na}$
- The resulting element $X$ will have:
- Mass number = 22
- Atomic number = 11 โ 1 = 10
Thus, $X = ^{22}_{10}\text{Ne}$
Thus, correct answer is option (2) $^{22}_{10}\text{Ne}$
32. The angle between the electric lines of force and the equipotential surface is:
(1) $45^\circ$
(2) $90^\circ$
(3) $180^\circ$
(4) $0^\circ$
Answer: (2) $90^\circ$
Explanation:
Electric field lines (lines of force) always intersect equipotential surfaces at right angles (90ยฐ).
This is because:
- No work is done in moving a charge along an equipotential surface.
- Work done is given by: $$W = qEd \cos\theta$$
- For $$W = 0$$ on an equipotential surface, $$\cos\theta = 0 \Rightarrow \theta = 90^\circ$$
Therefore, the electric field is perpendicular to the equipotential surface.
Thus, correct answer is option (2) 90ยฐ
33. A copper wire of length 10 m and radius $\left(\dfrac{10^{-2}}{\pi}\right)$ m has electrical resistance of 10 $\Omega$. The current density in the wire for an electric field strength of 10 (V/m) is:
(1) $10^6\ \text{A/m}^2$
(2) $10^{-5}\ \text{A/m}^2$
(3) $10^5\ \text{A/m}^2$
(4) $10^4\ \text{A/m}^2$
Answer: (3) $10^5\ \text{A/m}^2$
34. The ratio of the distances travelled by a freely falling body in the 1$^{\text{st}}$, 2$^{\text{nd}}$, 3$^{\text{rd}}$ and 4$^{\text{th}}$ second is:
(1) $1 : 4 : 9 : 16$
(2) $1 : 3 : 5 : 7$
(3) $1 : 1 : 1 : 1$
(4) $1 : 2 : 3 : 4$
Answer: (2) $1 : 3 : 5 : 7$
Explanation:
We are asked to find the ratio of distances travelled in each second by a freely falling body during the 1st, 2nd, 3rd, and 4th seconds.
Let initial velocity $u = 0$, and acceleration $a = g$ (due to gravity).
The distance travelled in the $n^\text{th}$ second is given by:
$$s_n = u + \frac{g}{2}(2n – 1)$$
Since $u = 0$, we get:
$$
s_n = \frac{g}{2}(2n – 1)
$$
Now compute for $n = 1, 2, 3, 4$:
- $s_1 = \frac{g}{2}(1) = \frac{g}{2}$
- $s_2 = \frac{g}{2}(3) = \frac{3g}{2}$
- $s_3 = \frac{g}{2}(5) = \frac{5g}{2}$
- $s_4 = \frac{g}{2}(7) = \frac{7g}{2}$
Now, take the ratio:
$$
s_1 : s_2 : s_3 : s_4 = 1 : 3 : 5 : 7
$$
Thus, correct answer is option (2) 1 : 3 : 5 : 7
35. An electric lift with a maximum load of 2000 kg (lift + passengers) is moving up with a constant speed of 1.5 m/s. The frictional force opposing the motion is 3000 N. The minimum power delivered by the motor to the lift in watts is: (g = 10 m/s$^2$)
(1) 20000
(2) 34500
(3) 23500
(4) 23000
Answer: (2) 34500
Explanation:
Given:
- Mass of lift $m = 2000\, \text{kg}$
- Speed $v = 1.5\, \text{m/s}$
- Frictional force $F_f = 3000\, \text{N}$
- Gravitational acceleration $g = 10\, \text{m/s}^2$
Since the lift is moving up with constant speed, the net force is zero, and the motor must balance both:
- The weight of the lift: $mg$
- The frictional force $F_f$
So, total opposing force:
$$F_{\text{total}} = mg + F_f = 2000 \cdot 10 + 3000 = 20000 + 3000 = 23000\, \text{N}$$
Now, Power is given by:
$$P = F_{\text{total}} \cdot v = 23000 \cdot 1.5 = 34500\, \text{W}$$
Thus, correct answer is option (2) 34500
Physics : Section – B
36. The volume occupied by the molecules contained in 4.5 kg water at STP, if the intermolecular forces vanish away is:
(1) $5.6 \times 10^3\ \text{m}^3$
(2) $5.6 \times 10^{-3}\ \text{m}^3$
(3) $5.6\ \text{m}^3$
(4) $5.6 \times 10^6\ \text{m}^3$
Answer: (3) $5.6\ \text{m}^3$
Explanation:
Given:
Mass of water = $4.5 \ kg = 4500 \ g$
Molar mass of water = $18 \ g/mol$
Number of moles of water:
$$
n = \frac{4500}{18} = 250 \ mol
$$
At STP, 1 mole of an ideal gas occupies $22.4 \ L = 22.4 \times 10^{-3} \ m^3$
If the intermolecular forces vanish, water behaves like an ideal gas.
So, total volume occupied by 250 moles at STP is:
$$
V = 250 \times 22.4 \times 10^{-3} = 5.6 \ m^3
$$
Thus, correct answer is option (3) $5.6 \ m^3$
37. The area of a rectangular field (in m$^2$) of length 55.3 m and breadth 25 m after rounding off the value for correct significant digits is:
(1) 1382
(2) 1382.5
(3) $14 \times 10^2$
(4) $138 \times 10^1$
Answer: (3) $14 \times 10^2$
Explanation:
Given:
Length = $55.3 \ m$ (3 significant figures)
Breadth = $25 \ m$ (2 significant figures)
Area of a rectangle:
$$
A = \text{length} \times \text{breadth} = 55.3 \times 25 = 1382.5 \ m^2
$$
Now, we must round the result to the least number of significant figures among the given values.
Breadth has 2 significant figures, so the final answer must have 2 significant figures.
Rounding $1382.5$ to 2 significant figures:
$$
A \approx 1.4 \times 10^3 \ m^2
$$
Thus, correct answer is option (3) $14 \times 10^2$
38. A capacitor of capacitance $C = 900$ pF is charged fully by $100$ V battery $B$ as shown in figure (a). Then it is disconnected from the battery and connected to another uncharged capacitor of capacitance $C = 900$ pF as shown in figure (b). The electrostatic energy stored by the system (b) is:

(1) 3.25 $\times$ 10$^{-6}$ J
(2) 2.25 $\times$ 10$^{-6}$ J
(3) 1.5 $\times$ 10$^{-6}$ J
(4) 4.5 $\times$ 10$^{-6}$ J
Answer: (2) 2.25 $\times$ 10$^{-6}$ J
39. Match List – I with List – II:
| List – I | List โ II |
| (a) Gravitational constant (G) | (i) $[L^2T^{-2}]$ |
| (b) Gravitational potential energy | (ii) $[M^{-1}L^3T^{-2}]$ |
| (c) Gravitational potential | (iii) $LT^{-2}$ |
| (d) Gravitational intensity | (iv) $ML^2T^{-2}$ |
Choose the correct answer from the options given below:
(1) (a)โ(ii), (b)โ(iv), (c)โ(i), (d)โ(iii)
(2) (a)โ(ii), (b)โ(iv), (c)โ(iii), (d)โ(i)
(3) (a)โ(iv), (b)โ(ii), (c)โ(i), (d)โ(iii)
(4) (a)โ(ii), (b)โ(i), (c)โ(iv), (d)โ(iii)
Answer: (1) (a)โ(ii), (b)โ(iv), (c)โ(i), (d)โ(iii)
Explanation:
Let us find the dimensional formulas for each physical quantity:
(a) Gravitational constant (G)
From Newtonโs law: $F = G \frac{m_1 m_2}{r^2}$
$$
G = \frac{F r^2}{m^2}
$$
Dimensions of $F = [M L T^{-2}]$
So,
$$
[G] = \frac{[M L T^{-2}] [L^2]}{[M^2]} = [M^{-1} L^3 T^{-2}]
$$
โ Matches with (ii)
(b) Gravitational potential energy = $[M L^2 T^{-2}]$
โ Matches with (iv)
(c) Gravitational potential = potential energy per unit mass
$$
[V] = \frac{[M L^2 T^{-2}]}{[M]} = [L^2 T^{-2}]
$$
โ Matches with (i)
(d) Gravitational intensity = gravitational field = force per unit mass
$$
[E] = \frac{[M L T^{-2}]}{[M]} = [L T^{-2}]
$$
โ Matches with (iii)
Correct matching:
(a) โ (ii)
(b) โ (iv)
(c) โ (i)
(d) โ (iii)
Thus, correct answer is option (1) (a)โ(ii), (b)โ(iv), (c)โ(i), (d)โ(iii)
40. Two pendulums of length 121 cm and 100 cm start vibrating in phase. At some instant, the two are at their mean position in the same phase. The minimum number of vibrations of the shorter pendulum after which the two are again in phase at the mean position is:
(1) 9โ
(2) 10โ
(3) 8โ
(4) 11
Answer: (4) 11
Explanation:
Time period of a simple pendulum is given by: $ T = 2\pi \sqrt{\frac{L}{g}}$
So, time period is proportional to square root of length: $T \propto \sqrt{L}$
Let $T_1$ and $T_2$ be the time periods of the pendulums of lengths 121 cm and 100 cm respectively.
So, their ratio is: $\frac{T_1}{T_2} = \sqrt{\frac{121}{100}} = \frac{11}{10}$
Let the number of vibrations made by pendulums be $n_1$ and $n_2$ respectively in the same time.
Then time is the same, so: $n_1 T_1 = n_2 T_2 \Rightarrow \frac{n_1}{n_2} = \frac{T_2}{T_1} = \frac{10}{11}$
This means: In the same time, the longer pendulum (121 cm) makes 10 vibrations and the shorter pendulum (100 cm) makes 11 vibrations.
Therefore, after 11 vibrations of the shorter pendulum, both will be again in phase.
Thus, correct answer is option (4) 11
41. Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A): The stretching of a spring is determined by the shear modulus of the material of the spring.
Reason (R): A coil spring of copper has more tensile strength than a steel spring of same dimensions.
In the light of the above statements, choose the most appropriate answer from the options given below:
(1) Both (A) and (R) are true and (R) is not the correct explanation of (A)
(2) (A) is true but (R) is false
(3) (A) is false but (R) is true
(4) Both (A) and (R) are true and (R) is the correct explanation of (A)
Answer: (2) (A) is true but (R) is false
Explanation:
Assertion (A): True.
In a spring, the deformation involves twisting (shear), especially in coil springs. The restoring force depends on the shear modulus (not Youngโs modulus or tensile strength). So, stretching of a spring is determined by the shear modulus of the material.
Reason (R): False.
Steel has higher tensile strength than copper. Thatโs why steel is preferred for making springs, not copper.
So, the statement that a copper spring has more tensile strength than steel is incorrect.
Thus, correct answer is option (2) (A) is true but (R) is false
42. A ball is projected with a velocity, 10 ms$^{-1}$, at an angle of 60$\circ$ with the vertical direction. Its speed at the highest point of its trajectory will be:
(1) $5\sqrt{3}$ms$^{-1}$โโ
(2) 5 ms$^{-1}$โโ
(3) 10 ms$^{-1}$โโ
(4) Zero
Answer: (1) $5\sqrt{3}$ms$^{-1}$
Explanation:
The ball is projected at an angle of $60^\circ$ with the vertical, so the angle with the horizontal is:
$$
\theta = 90^\circ – 60^\circ = 30^\circ
$$
Let the initial velocity be $u = 10 \ ms^{-1}$
At the highest point of projectile motion:
- The vertical component of velocity becomes zero
- The horizontal component remains constant
Horizontal component of velocity:
$$
v = u \cos\theta = 10 \cos 30^\circ = 10 \times \frac{\sqrt{3}}{2} = 5\sqrt{3} \ ms^{-1}
$$
Therefore, the speed at the highest point is:
$$
5\sqrt{3} \ ms^{-1}
$$
Thus, correct answer is option (1) $5\sqrt{3} \ ms^{-1}$
43. Two transparent media A and B are separated by a plane boundary. The speed of light in those media are $1.5 \times 10^8$ m/s and $2.0 \times 10^8$ m/s, respectively. The critical angle for a ray of light for these two media is:
(1) $\sin^{-1}(0.750)$
(2) $\tan^{-1}(0.500)$
(3) $\tan^{-1}(0.750)$
(4) $\sin^{-1}(0.500)$
Answer: (1) $\sin^{-1}(0.750)$
Explanation:
The critical angle $C$ is given when light travels from denser to rarer medium:
$$
\sin C = \frac{v_2}{v_1}
$$
where:
$v_1 = 1.5 \times 10^8 \ m/s$ (speed in denser medium A)
$v_2 = 2.0 \times 10^8 \ m/s$ (speed in rarer medium B)
So,
$$
\sin C = \frac{v_2}{v_1} = \frac{2.0 \times 10^8}{1.5 \times 10^8} = \frac{4}{3}
$$
But this gives $\sin C > 1$, which is not possible.
We must correct the setup:
Light travels from denser to rarer medium only if $v_1 < v_2$
Since $v_1 = 1.5 \times 10^8 \ m/s$ (A) and $v_2 = 2.0 \times 10^8 \ m/s$ (B), light goes from A to B.
Hence,
$$
\sin C = \frac{v_2}{v_1} = \frac{1.5}{2.0} = 0.75
$$
So,
$$
C = \sin^{-1}(0.75)
$$
Thus, correct answer is option (1) $\sin^{-1}(0.750)$
44.

The truth table for the given logic circuit is:
(1)

(2)

(3)

(4)

Answer: (2)
45. A series LCR circuit with inductance 10 H, capacitance 10 ฮผF, resistance 50 ฮฉ is connected to an ac source of voltage, V = 200 sin (100 t) volt. If the resonant frequency of the LCR circuit is vโ and the frequency of the ac source is v, then
(1) $v_0 = v = \frac{50}{\pi}$ Hz
(2) $v_0 = \frac{50}{\pi}$ Hz, v = 50 Hz
(3) v = 100 Hz ; $v_0 = \frac{100}{\pi}$ Hz
(4) $v_0 = v = 50$ Hz
Answer: (1) $v_0 = v = \frac{50}{\pi}$ Hz
Explanation:
Given:
Inductance $L = 10 \ H$
Capacitance $C = 10 \ \mu F = 10 \times 10^{-6} \ F$
AC voltage: $V = 200 \sin(100 \ t)$
The general form of AC voltage is:
$$
V = V_0 \sin(\omega t) \Rightarrow \omega = 100 \ rad/s
$$
So, frequency of the AC source:
$$
v = \frac{\omega}{2\pi} = \frac{100}{2\pi} = \frac{50}{\pi} \ Hz
$$
Now, resonant frequency $v_o$ of an LCR circuit is given by:
$$
v_o = \frac{1}{2\pi \sqrt{LC}} = \frac{1}{2\pi \sqrt{10 \times 10 \times 10^{-6}}}
= \frac{1}{2\pi \sqrt{10^{-4}}} = \frac{1}{2\pi \times 10^{-2}} = \frac{100}{2\pi} = \frac{50}{\pi} \ Hz
$$
So, $v_o = v = \frac{50}{\pi} \ Hz$
Thus, correct answer is option (1) $v_o = v = \frac{50}{\pi} \ Hz$
46. A wheatstone bridge is used to determine the value of unknown resistance X by adjusting the variable resistance Y as shown in the figure. For the most precise measurement of X, the resistances P and Q:

(1) should be approximately equal and are small
(2) should be very large and unequal
(3) do not play any significant role
(4) should be approximately equal to 2X
Answer: (1) should be approximately equal and are small
47. From Ampere’s circuital law for a long straight wire of circular cross-section carrying a steady current, the variation of magnetic field in the inside and outside region of the wire is:
(1) a linearly increasing function of distance upto the boundary of the wire and then linearly decreasing for the outside region.
(2) a linearly increasing function of distance r upto the boundary of the wire and then decreasing one with 1/r dependence for the outside region.
(3) a linearly decreasing function of distance upto the boundary of the wire and then a linearly increasing one for the outside region.
(4) uniform and remains constant for both the regions.
Answer: (2)
Explanation:
Using Ampere’s Circuital Law:
For a long straight wire carrying a steady current I, the magnetic field $B$ at a distance $r$ from the center is given by:
- Inside the wire ($r < R$):
Assuming current is uniformly distributed across the cross section, the enclosed current is proportional to the area:
$$
B = \frac{\mu_0 I r}{2\pi R^2}
$$
So, $B \propto r$ โ linearly increases with $r$ - Outside the wire ($r \geq R$):
Entire current is enclosed:
$$
B = \frac{\mu_0 I}{2\pi r}
$$
So, $B \propto \frac{1}{r}$ โ inversely proportional to $r$
Hence, the magnetic field:
- Increases linearly from the center to the surface
- Decreases as $1/r$ outside the wire
Thus, correct answer is option (2).
48. A big circular coil of 1000 turns and average radius 10 m is rotating about its horizontal diameter at 2 rad s$^{-1}$. If the vertical component of earth’s magnetic field at that place is $2 \times 10^{-5}$ T and electrical resistance of the coil is 12.56 ฮฉ, then the maximum induced current in the coil will be:
(1) 1.5 Aโโ
(2) 1 Aโโ
(3) 2 Aโโ
(4) 0.25 A
Answer: (2) 1 A
Explanation:
Given:
Number of turns $N = 1000$
Radius $r = 10 \ m$
Angular speed $\omega = 2 \ rad/s$
Vertical magnetic field $B = 2 \times 10^{-5} \ T$
Resistance $R = 12.56 \ \Omega$
The maximum EMF induced in a rotating coil is given by:
$$
E_{max} = N B A \omega
$$
Where $A$ is the area of the coil:
$$
A = \pi r^2 = \pi \times (10)^2 = 100\pi \ m^2
$$
Now substitute into EMF formula:
$$
E_{max} = 1000 \times 2 \times 10^{-5} \times 100\pi \times 2 = 4\pi \ V
$$
Maximum induced current:
$$
I_{max} = \frac{E_{max}}{R} = \frac{4\pi}{12.56} = 1 \ A
$$
Thus, correct answer is option (2) $1 \ A$
49. Two point charges โq and +q are placed at a distance of L, as shown in the figure.

The magnitude of electric field intensity at a distance R (R >> L) varies as:
(1) $\frac{1}{R^3}$
(2) $\frac{1}{R^4}$
(3) $\frac{1}{R^6}$
(4) $\frac{1}{R^2}$
Answer: (1) $\frac{1}{R^3}$
Explanation:
This is a case of an electric dipole, formed by two equal and opposite charges $+q$ and $-q$ separated by a small distance $L$.
The dipole moment is:
$$
\vec{p} = q \cdot L
$$
At a point far away from the dipole ($R \gg L$), the electric field due to a dipole is:
- On the axial line (along the dipole axis):
$$
E = \frac{1}{4\pi\varepsilon_0} \cdot \frac{2p}{R^3}
$$ - On the equatorial line (perpendicular bisector):
$$
E = \frac{1}{4\pi\varepsilon_0} \cdot \frac{p}{R^3}
$$
In both cases, the electric field varies as:
$$
E \propto \frac{1}{R^3}
$$
Thus, correct answer is option (1) $\frac{1}{R^3}$
50. A nucleus of mass number 189 splits into two nuclei having mass number 125 and 64. The ratio of radius of two daughter nuclei respectively is:
(1) 4 : 5โ
(2) 5 : 4
(3) 25 : 16
(4) 1 : 1
Answer: (2) 5 : 4
Explanation:
The radius $R$ of a nucleus is given by the empirical formula:
$$
R = R_0 A^{1/3}
$$
where $A$ is the mass number.
Let the two daughter nuclei have mass numbers $A_1 = 125$ and $A_2 = 64$.
Then the ratio of their radii is:
$$
\frac{R_1}{R_2} = \left( \frac{A_1}{A_2} \right)^{1/3} = \left( \frac{125}{64} \right)^{1/3}
$$
Simplify:
$$
\frac{R_1}{R_2} = \left( \frac{5^3}{4^3} \right)^{1/3} = \frac{5}{4}
$$
So, the ratio of radii is $5 : 4$
Thus, correct answer is option (2) 5 : 4



