1. A wooden block of mass M lies on a rough floor. Another wooden block of the same mass is hanging from the point O through strings as shown in the figure. To achieve equilibrium, the co-efficient of static friction between the block on the floor with the floor itself is

(1) $\mu = \cot \theta$
(2) $\mu = \sin \theta$
(3) $\mu = \tan \theta$
(4) $\mu = \cos \theta$
Answer: (1) $\mu = \cot \theta$
Solution:
Let the mass of each block be $M$. The hanging block is in equilibrium, so: $T = Mg$
For the block on the floor:
– Horizontal component of tension: $T \cos\theta$
– Vertical component of tension: $T \sin\theta$
– Normal force: $N$
– Friction force: $f = \mu N$
Vertical force balance: $$N + T \sin\theta = Mg \Rightarrow N = Mg – T \sin\theta = Mg(1 – \sin\theta)$$
Horizontal force balance: $$T \cos\theta = \mu N = \mu Mg(1 – \sin\theta)$$
Substitute $T = Mg$: $$Mg \cos\theta = \mu Mg(1 – \sin\theta)$$
Cancel $Mg$: $$\cos\theta = \mu (1 – \sin\theta) \Rightarrow \mu = \frac{\cos\theta}{1 – \sin\theta}$$
Now, using the triangle of forces:
– Vertical side = $Mg$
– Horizontal side = $\mu Mg$
From triangle: $$\tan\theta = \frac{Mg}{\mu Mg} = \frac{1}{\mu} \Rightarrow \mu = \cot\theta$$
Thus, correct answer is option (1) $\mu = \cot\theta$
2. A block of certain mass is placed on a rough floor. The coefficients of static and kinetic friction between the block and the floor are 0.4 and 0.25 respectively. A constant horizontal force F = 20 N acts on it so that the velocity of the block varies with time according to the following graph. The mass of the block is nearly (Take $g \approx$ 10 ms$^{-2}$)

(1) 4.4 kg
(2) 1.2 kg
(3) 1.0 kg
(4) 2.2 kg
Answer: (4) 2.2 kg
Solution:
Given:
Applied force $F = 20\ \text{N}$
Coefficient of static friction $\mu_s = 0.4$
Coefficient of kinetic friction $\mu_k = 0.25$
From the graph:
Initial velocity $u = 0$, final velocity $v = 20\ \text{m/s}$ in $t = 4\ \text{s}$
Acceleration is: $a = \frac{v – u}{t} = \frac{20 – 0}{4} = 5\ \text{m/s}^2$
Let the mass of the block be $m$.
Using Newton’s Second Law:
$$F – \mu_k mg = ma$$
Substitute values:
$$20 – 0.25 \cdot m \cdot 10 = m \cdot 5$$
$$20 – 2.5m = 5m$$
$$20 = 7.5m \Rightarrow m = \frac{20}{7.5} = 2.67\ \text{kg}$$
The closest option to $2.67\ \text{kg}$ is: (4) 2.2 kg
3. A body of mass 0.25 kg travels along a straight line from $x = 0$ to $x = 2m$ with a speed $v = kx^{3/2}$ where $k = 2$ SI units. The work done by the net during this displacement is
(1) 8 J
(2) 16 J
(3) 32 J
(4) 4 J
Answer: (4) 4 J
Solution:
Given:
Mass $m = 0.25\ \text{kg}$
Velocity as a function of position: $v = kx^{3/2}$
Where $k = 2$ and $x$ changes from $0$ to $2$ meters.
Net work done is the change in kinetic energy: $W = \Delta K = K_{\text{final}} – K_{\text{initial}}$
Kinetic energy at any position $x$ is: $K = \frac{1}{2}mv^2 = \frac{1}{2}m(kx^{3/2})^2 = \frac{1}{2}m k^2 x^3$
At $x = 0$:
$$K_0 = \frac{1}{2} \cdot 0.25 \cdot 2^2 \cdot 0^3 = 0$$
At $x = 2$:
$$K = \frac{1}{2} \cdot 0.25 \cdot 2^2 \cdot 8 = 0.125 \cdot 32 = 4\ \text{J}$$
Therefore, $W = 4 – 0 = 4\ \text{J}$
Thus, correct answer is option (4) 4 J
4. During an elastic collision between two bodies, which of the following statements are correct?
I. The initial kinetic energy is equal to the final kinetic energy of the system.
II. The linear momentum is conserved.
III. The kinetic energy during $\Delta t$ (the collision time) is not conserved.
(1) II and III only
(2) I and III only
(3) I, II and III
(4) I and II only
Answer: (3) I, II and III
Solution: In an elastic collision, certain principles of physics always hold true. Letโs examine each statement one by one.
Statement I: The initial kinetic energy is equal to the final kinetic energy of the system.
This is a defining property of an elastic collision. In such collisions, there is no loss of kinetic energy before and after the collision. Therefore, this statement is correct.
Statement II: The linear momentum is conserved.
This is always true for collisions when no external force acts on the system. Whether the collision is elastic or inelastic, total linear momentum remains constant. So, this statement is also correct.
Statement III: The kinetic energy during ฮt (the collision time) is not conserved.
Even though the total kinetic energy before and after the collision is conserved, during the brief instant of collision (the contact period), part of the kinetic energy may temporarily convert into potential energy (such as in deformation or compression). Hence, kinetic energy is not necessarily conserved at every moment during ฮt, but it is restored fully by the end of the collision. So, this statement is also considered correct in the context of what happens during the collision interval.
Conclusion: All three statements โ I, II, and III โ are correct descriptions of what happens in an elastic collision. So, correct answer is option (3) I, II and III.
5. Three particles of mass 1 kg, 2 kg and 3 kg are placed at the vertices A, B and C respectively of an equilateral triangle ABC of side 1m. The centre of mass of the system from vertex A (located at origin) is
(1) $\left( \frac{7}{12}, \frac{3\sqrt{3}}{12} \right)$
(2) $\left( \frac{9}{12}, \frac{3\sqrt{3}}{12} \right)$
(3) $\left( \frac{7}{12}, \frac{6 + 3\sqrt{3}}{12} \right)$
(4) $\left(0, 0 \right)$
Answer: (1) $\left( \frac{7}{12}, \frac{3\sqrt{3}}{12} \right)$
Solution:
Let us place the triangle in coordinate geometry for easier calculation.
Given:
– Masses: $m_1 = 1\ \text{kg}$ at point $A(0, 0)$
– $m_2 = 2\ \text{kg}$ at point $B(1, 0)$
– $m_3 = 3\ \text{kg}$ at point $C\left(0.5, \frac{\sqrt{3}}{2}\right)$
Total mass: $M = m_1 + m_2 + m_3 = 1 + 2 + 3 = 6\ \text{kg}$
Using center of mass formulas:
For $\bar{x}$:
$$\bar{x} = \frac{1 \cdot 0 + 2 \cdot 1 + 3 \cdot 0.5}{6} = \frac{0 + 2 + 1.5}{6} = \frac{3.5}{6} = \frac{7}{12}$$
For $\bar{y}$:
$$\bar{y} = \frac{1 \cdot 0 + 2 \cdot 0 + 3 \cdot \frac{\sqrt{3}}{2}}{6} = \frac{0 + 0 + \frac{3\sqrt{3}}{2}}{6} = \frac{3\sqrt{3}}{12}$$
Therefore, the center of mass from vertex A is: $\left(\frac{7}{12}, \frac{3\sqrt{3}}{12}\right)$
Thus, correct answer is option (1) $\left(\frac{7}{12}, \frac{3\sqrt{3}}{12}\right)$
6. Two fly wheels are connected by a non-slipping belt as shown in the figure. $I_1 = 4 \, \text{kg m}^2$, $r_1 = 20 \, \text{cm}$, $I_2 = 20 \, \text{kg m}^2$ and $r_2 = 30 \, \text{cm}$. A torque of 10 Nm is applied on the smaller wheel. Then match the entries of column I with appropriate entries of column II.
| I | Quantities | II | Their numerical Values (in SI units) |
| (a) | Angular acceleration of smaller wheel | (i) | $\frac{5}{3}$ |
| (b) | Torque on the larger wheel | (ii) | $\frac{100}{3}$ |
| (c) | Angular acceleration of larger wheel | (iii) | $\frac{5}{2}$ |

(1) a โ ii, b โ iii, c โ i
(2) a โ iii, b โ i, c โ ii
(3) a โ ii, b โ i, c โ iii
(4) a โ iii, b โ ii, c โ i
Answer: (4) a โ iii, b โ ii, c โ i
Solution:
Given:
– Smaller wheel: $I_1 = 4\ \text{kgยทm}^2$, $r_1 = 0.2\ \text{m}$
– Larger wheel: $I_2 = 20\ \text{kgยทm}^2$, $r_2 = 0.3\ \text{m}$
– Torque on smaller wheel: $\tau_1 = 10\ \text{Nm}$
(a) Angular acceleration of smaller wheel:
Using $\tau = I\alpha$,
$$\alpha_1 = \frac{\tau_1}{I_1} = \frac{10}{4} = \frac{5}{2}\ \text{rad/s}^2$$
(b) Angular acceleration of larger wheel:
Non-slipping condition:
$$\alpha_2 = \frac{r_1}{r_2} \cdot \alpha_1 = \frac{0.2}{0.3} \cdot \frac{5}{2} = \frac{2}{3} \cdot \frac{5}{2} = \frac{5}{3}\ \text{rad/s}^2$$
(c) Torque on larger wheel:
$$\tau_2 = I_2 \cdot \alpha_2 = 20 \cdot \frac{5}{3} = \frac{100}{3}\ \text{Nm}$$
Matching entries: (a) โ (iii), (b) โ (ii), (c) โ (i)
Thus, correct answer is option (4) a โ iii, b โ ii, c โ i
7. If $r_p, v_p, L_p$ and $r_a, v_a, L_a$ are radii, velocities and angular momenta of a planet at perihelion and aphelion of its elliptical orbit around the Sun respectively, then
(1) $r_p > r_a, \, v_p > v_a, \, L_a > L_p$
(2) $r_p < r_a, \, v_p > v_a, \, L_a = L_p$
(3) $r_p > r_a, \, v_p < v_a, \, L_a = L_p$
(4) $r_p < r_a, \, v_p < v_a, \, L_a < L_p$
Answer: (2) $r_p < r_a, \, v_p > v_a, \, L_a = L_p$
Solution:
For a planet orbiting the Sun in an elliptical path:
– $r_p$ is the distance at perihelion (closest point to the Sun)
– $r_a$ is the distance at aphelion (farthest point from the Sun)
Clearly,
$$r_p < r_a$$
The planet moves faster when it is closer to the Sun due to gravitational acceleration, so:
$$v_p > v_a$$
By conservation of angular momentum:
$$L_p = L_a$$
Hence, the correct relation is:
$$r_p < r_a,\ v_p > v_a,\ L_p = L_a$$
Thus, correct answer is option(2) $r_p < r_a,\ v_p > v_a,\ L_a = L_p$
8. The total energy of a satellite in a circular orbit at a distance (R + h) from the centre of the Earth varies as [R is the radius of the Earth and h is the height of the oribit from Earthโs surface]
(1) $-\frac{1}{(R + h)}$
(2) $\frac{1}{(R + h)^2}$
(3) $-\frac{1}{(R + h)^2}$
(4) $\frac{1}{(R + h)}$
Answer: (1) $-\frac{1}{(R + h)}$
Solution:
The total mechanical energy $E$ of a satellite in a circular orbit of radius $r = R + h$ from the center of the Earth is given by:
$$E = -\frac{GMm}{2r} = -\frac{GMm}{2(R + h)}$$
This shows that total energy is inversely proportional to $(R + h)$:
$$E \propto -\frac{1}{R + h}$$
Therefore, the correct answer is option (1) $-\dfrac{1}{R + h}$
9. Two wires A and B are made of same material. Their diameters are in the ratio of 1:2 and lengths are in the ratio of 1:3. If they are stretched by the same force, then increase in their lengths will be in the ratio of
(1) 3 : 4
(2) 2 : 3
(3) 3 : 2
(4) 4 : 3
Answer: (4) 4 : 3
Solution:
The elongation of a wire under a stretching force is given by:
$$\Delta L = \frac{FL}{AY}$$
Since both wires are made of the same material and stretched by the same force, we get:
$$\Delta L \propto \frac{L}{A}$$
The cross-sectional area is $A = \frac{\pi d^2}{4}$, so:
$$\Delta L \propto \frac{L}{d^2}$$
Given: diameters are in the ratio $d_A : d_B = 1 : 2$ and lengths are in the ratio $L_A : L_B = 1 : 3$
So, for wire A: $\Delta L_A \propto \frac{1}{1^2} = 1$
And for wire B: $\Delta L_B \propto \frac{3}{2^2} = \frac{3}{4}$
Therefore, the ratio of elongations is:
$$\frac{\Delta L_A}{\Delta L_B} = \frac{1}{\frac{3}{4}} = \frac{4}{3}$$
Therefore, the correct answer is option (4) $4 : 3$
10. A horizontal pipe carries water in a streamlined flow. At a point along the pipe, where the cross-sectional area is 10 cm$^{-2}$, the velocity of water is 1 ms$^{-1}$ and the pressure is 2000 Pa. What is the pressure of water at another point where the cross-sectional area is 5 cm$^2$?
[Density of water = 1000 kgm$^{-3}$]
(1) 300 Pa
(2) 400 Pa
(3) 500 Pa
(4) 200 Pa
Answer: (3) 500 Pa
Solution:
Given:
At point 1: $A_1 = 10\ \text{cm}^2 = 10 \times 10^{-4}\ \text{m}^2$, $v_1 = 1\ \text{m/s}$, $P_1 = 2000\ \text{Pa}$
At point 2: $A_2 = 5\ \text{cm}^2 = 5 \times 10^{-4}\ \text{m}^2$, $P_2 = ?$
Density of water: $\rho = 1000\ \text{kg/m}^3$
Using the continuity equation:
$$A_1 v_1 = A_2 v_2 \Rightarrow v_2 = \frac{A_1 v_1}{A_2} = \frac{10}{5} \cdot 1 = 2\ \text{m/s}$$
Now apply Bernoulliโs equation:
$$P_1 + \frac{1}{2} \rho v_1^2 = P_2 + \frac{1}{2} \rho v_2^2$$
Substitute the values:
$$2000 + \frac{1}{2} \cdot 1000 \cdot 1^2 = P_2 + \frac{1}{2} \cdot 1000 \cdot 2^2$$
$$2000 + 500 = P_2 + 2000 \Rightarrow 2500 = P_2 + 2000$$
$$P_2 = 500\ \text{Pa}$$
Therefore, the correct answer is option (3) 500 Pa
11. Three metal rods of the same material and identical in all respects are joined as shown in the figure. The temperatures at the ends of these rods are maintained as indicated. Assuming no heat energy loss occurs through the curved surfaces of the rods, the temperature at the junction x is

(1) $60^\circ$
(2) $30^\circ$
(3) $20^\circ$
(4) $45^\circ$
Answer: (1) $60^\circ$
Solution:
Let the temperature at junction $X$ be $T$.
Each rod is identical in material and shape, so the heat current through a rod is proportional to the temperature difference across it.
From the left rod: heat flows from $0^\circ$C to $T$
So, heat current: $Q_1 \propto T$
From the other two rods: heat flows from $90^\circ$C to $T$
So, heat current from each: $Q_2 = Q_3 \propto 90 – T$
In steady state, total incoming heat equals total outgoing heat:
$$Q_1 = Q_2 + Q_3 \Rightarrow T = (90 – T) + (90 – T)$$
Simplifying:
$$T = 180 – 2T \Rightarrow 3T = 180 \Rightarrow T = 60^\circ\text{C}$$
Therefore, the correct answer is option (1) $60^\circ\text{C}$
12. A gas is taken from state A to state B along two different paths 1 and 2. The heat absorbed and work done by the system along these two paths are $Q_1$ and $Q_2$ and $W_1$ and $W_2$ respectively. Then
(1) $W_1 = W_2$
(2) $Q_1 – W_1 = Q_2 – W_2$
(3) $Q_1 + W_1 = Q_2 + W_2$
(4) $Q_1 = Q_2$
Answer: (2) $Q_1 – W_1 = Q_2 – W_2$
Solution:
According to the First Law of Thermodynamics:
$$\Delta U = Q – W$$
Since the gas moves from the same initial state A to the same final state B along both paths, the change in internal energy $\Delta U$ is the same for both.
For path 1:
$$\Delta U = Q_1 – W_1$$
For path 2:
$$\Delta U = Q_2 – W_2$$
Equating both expressions:
$$Q_1 – W_1 = Q_2 – W_2$$
Thus, correct answer is option (2) $Q_1 – W_1 = Q_2 – W_2$
13. At $27^\circ$C temperature, the mean kinetic energy of the atoms of an ideal gas is $E_1$. If the temperature is increased to $327^\circ$C, then the mean kinetic energy of the atoms will be
(1) $\frac{E_1}{\sqrt{2}}$
(2) $\sqrt{2} E_1$
(3) $2E_1$
(4) $\frac{E_1}{2}$
Answer: (3) $2E_1$
Solution:
The mean kinetic energy $E$ of an ideal gas is directly proportional to its absolute temperature $T$: $E \propto T$
Given:
Initial temperature $T_1 = 27^\circ\text{C} = 300\ \text{K}$
Final temperature $T_2 = 327^\circ\text{C} = 600\ \text{K}$
Using the proportionality:
$$\frac{E_2}{E_1} = \frac{T_2}{T_1} = \frac{600}{300} = 2$$
So, $E_2 = 2E_1$
Thus, correct answer is option (3) $2E_1$
14. The variations of kinetic energy $K(x)$, potential energy $U(x)$ and total energy as a function of displacement of a particle in SHM is as shown in the figure. The value of $|x_0|$ is

(1) 2A
(2) $\frac{A}{\sqrt{2}}$
(3) $\sqrt{2}A$
(4) $\frac{A}{2}$
Answer: (2) $\frac{A}{\sqrt{2}}$
Solution:
In SHM, total energy is constant and given by:
$$E = \frac{1}{2}kA^2$$
Potential energy at displacement $x$ is:
$$U(x) = \frac{1}{2}kx^2$$
Kinetic energy is:
$$K(x) = E – U(x) = \frac{1}{2}k(A^2 – x^2)$$
From the graph, at $x = x_0$, the kinetic and potential energies are equal:
$$K(x_0) = U(x_0) = \frac{E}{2}$$
Substitute in $U(x_0)$:
$$\frac{1}{2}k x_0^2 = \frac{1}{2} \cdot \frac{1}{2}k A^2 \Rightarrow x_0^2 = \frac{A^2}{2}$$
Therefore:
$$|x_0| = \frac{A}{\sqrt{2}}$$
Thus, correct answer is option (2) $\frac{A}{\sqrt{2}}$
15. The angle between the particle velocity and wave velocity in a transverse wave is [except when the particle passes through the mean position]
(1) $\frac{\pi}{4}$ radian
(2) $\frac{\pi}{2}$ radian
(3) $\pi$ radian
(4) Zero radian
Answer: (2) $\frac{\pi}{2}$ radian
Solution:
In a transverse wave:
– The wave velocity is in the direction of wave propagation (horizontal).
– The particle velocity is perpendicular to the direction of propagation (vertical), except at the mean position.
Therefore, except when the particle is at the mean position, the angle between the particle velocity and wave velocity is:
$$\frac{\pi}{2} \text{ radians}$$
Thus, correct answer is option (2) $\frac{\pi}{2}$ radian
16. A metallic sphere of radius R carrying a charge q is kept at certain distance from another metallic sphere of radius R/4 carrying a charge Q. What is the electric flux at any point inside the metallic sphere of radius R due to the sphere of radius R/4?

(1) $\frac{Q}{\varepsilon_0} – \frac{q}{\varepsilon_0}$
(2) Zero
(3) $\frac{q}{\varepsilon_0} – \frac{Q}{\varepsilon_0}$
(4) $\frac{Q}{\varepsilon_0}$
Answer: (2) Zero
Solution:
According to Gaussโs Law, the electric flux through a closed surface is given by:
$$\Phi = \frac{q_{\text{enclosed}}}{\varepsilon_0}$$
Here, we are asked to find the electric flux inside the metallic sphere of radius $R$ due to the other sphere (of radius $R/4$).
Since the smaller sphere is outside the metallic sphere of radius $R$, it contributes no enclosed charge.
Therefore, the net electric flux inside the metallic sphere of radius $R$ due to the other sphere is:
$$\Phi = \frac{0}{\varepsilon_0} = 0$$
Thus, correct answer is option (2) Zero
17. You are given a dipole of charge + q and โ q separated by a distance 2R. A sphere โAโ of radius โRโ passes through the centre of the dipole as shown below and another sphere โBโ of radius โ2Rโ passes through the charge +q. Then the electric flux through the sphere A is

(1) $\frac{q}{\varepsilon_0}$
(2) Zero
(3) $\frac{2q}{\varepsilon_0}$
(4) $-\frac{q}{\varepsilon_0}$
Answer: (4) $-\frac{q}{\varepsilon_0}$
Solution:
From Gaussโs Law:
$$\Phi = \frac{q_{\text{enclosed}}}{\varepsilon_0}$$
Here, sphere A encloses only the charge $-q$ (as shown in the diagram). The charge $+q$ lies outside sphere A.
Therefore, the electric flux through sphere A is:
$$\Phi_A = \frac{-q}{\varepsilon_0}$$
Thus, correct answer is option (4) $\frac{-q}{\varepsilon_0}$
18. A potential at a point A is โ 3 V and that at another point B is 5V. What is the work done in carrying a charge of 5m C from B to A ?
(1) โ 0.04 J
(2) โ 0.4 J
(3) โ 4 J
(4) โ 40 J
Answer: (1) โ 0.04 J
Solution:
Work done in moving a charge from point B to A is given by:
$$W = q (V_A – V_B)$$
Given:
– $q = 5\ \text{mC} = 5 \times 10^{-3}\ \text{C}$
– $V_A = -3\ \text{V}$
– $V_B = 5\ \text{V}$
Substitute:
$$W = (5 \times 10^{-3}) \cdot (-3 – 5) = (5 \times 10^{-3}) \cdot (-8) = -0.04\ \text{J}$$
Thus, correct answer is option (1) $-0.04\ \text{J}$
19. Charges are uniformly spread on the surface of a conducting sphere. The electric field from the centre of sphere to a point outside the sphere varies with distance r from the centre as
(1)

(2)

(3)

(4)

Answer: (1)
Solution:
For a conducting sphere with charge uniformly distributed on its surface:
– Inside the sphere ($r < R$), the electric field is zero:
$$E = 0$$
– Outside the sphere ($r > R$), the field behaves like a point charge:
$$E = \frac{1}{4\pi\varepsilon_0} \cdot \frac{Q}{r^2} \propto \frac{1}{r^2}$$
So, the electric field is zero inside and decreases as $\frac{1}{r^2}$ outside.
The correct graph showing this behavior is Option (1)
20. Match Column-I with Column-II related to an electric dipole of dipole moment $\vec{p}$ that is placed in a uniform electric field $\vec{E}$.
| Column โ I Angle between $\vec{p}$ and $\vec{E}$ | Column โ II Potential energy of the dipole |
| a) 180$^\circ$ b) 120$^\circ$ c) 90$^\circ$ | i) -pE ii) pE iii) $\frac{1}{2}pE$ iv) Zero |
(1) a โ i, b โ ii, c โ iii
(2) a โ ii, b โ iii, c โ i
(3) a โ ii, b โ i, c โ iv
(4) a โ ii, b โ iii, c โ iv
Answer: (4) a โ ii, b โ iii, c โ iv
Solution:
The potential energy of a dipole in a uniform electric field is given by:
$$U = -\vec{p} \cdot \vec{E} = -pE \cos\theta$$
Now evaluate for each case:
a) $\theta = 180^\circ$
$\cos 180^\circ = -1$
$U = -pE \cdot (-1) = pE$ โ Match with (ii)
b) $\theta = 120^\circ$
$\cos 120^\circ = -\frac{1}{2}$
$U = -pE \cdot \left(-\frac{1}{2}\right) = \frac{1}{2}pE$ โ Match with (iii)
c) $\theta = 90^\circ$
$\cos 90^\circ = 0$
$U = -pE \cdot 0 = 0$ โ Match with (iv)
Matching table:
| Column โ I | Column โ II |
| a) 180$^\circ$ | ii) pE |
| b) 120$^\circ$ | iii) $\frac{1}{2}pE$ |
| c) 90$^\circ$ | iv) Zero |
Thus, correct answer is option (4) a โ ii, b โ iii, c โ iv
21. Which of the following statements is not true?
(1) Work done to move a charge on an equipotential surface is not zero
(2) Equipotential surfaces are the surfaces where the potential is constant
(3) Equipotential surfaces for a uniform electric field are parallel and equidistant from each other
(4) Electric field is always perpendicular to an equipotential surfaces.
Answer: (1) Work done to move a charge on an equipotential surface is not zero
Solution:
To identify the false statement, let’s evaluate each option:
(1) Work done to move a charge on an equipotential surface is not zero
This is not true. Since potential is constant on an equipotential surface, the work done in moving a charge along the surface is zero.
Work done $W = q \Delta V = 0$ (as $\Delta V = 0$)
(2) Equipotential surfaces are the surfaces where the potential is constant
This is true by definition.
(3) Equipotential surfaces for a uniform electric field are parallel and equidistant from each other
This is true. For a uniform electric field, the change in potential is linear with distance, so equipotential surfaces are evenly spaced.
(4) Electric field is always perpendicular to an equipotential surface
This is also true. The electric field points in the direction of maximum decrease of potential, which is perpendicular to the surface.
Thus, correct answer is option (1) Work done to move a charge on an equipotential surface is not zero
22. Which of the following is a correct statement?
(1) Gaussโs law is true for any open surface
(2) Gaussโs law is not applicable when charges are not symmetrically distributed over a closed surface.
(3) Gaussโs law does not hold good for a charge situated outside the Gaussian surface.
(4) Gaussโs law is true for any closed surface
Answer: (4) Gaussโs law is true for any closed surface
Solution:
Gauss’s law states that:
$$\Phi_E = \oint \vec{E} \cdot d\vec{A} = \frac{q_{\text{in}}}{\varepsilon_0}$$
This law is valid for any closed surface, regardless of the charge distribution or symmetry.
Now evaluate each option:
(1) Gaussโs law is true for any open surface
Incorrect. Gauss’s law only applies to closed surfaces.
(2) Gaussโs law is not applicable when charges are not symmetrically distributed over a closed surface
Incorrect. Symmetry is required only for simplifying field calculations, not for applying Gauss’s law itself. The law is always valid for closed surfaces.
(3) Gaussโs law does not hold good for a charge situated outside the Gaussian surface
Incorrect. Gauss’s law is still valid, but charges outside the surface **do not contribute** to the net flux.
(4) Gaussโs law is true for any closed surface
This is the correct statement.
Thus, correct answer is option (4) Gaussโs law is true for any closed surface
23. In the following circuit, the terminal voltage across the cell is

(1) 1.68 V
(2) 1.95 V
(3) 2.71 V
(4) 0.52 V
Answer: (2) 1.95 V
Solution:
Given:
– EMF of the cell = $E = 2\ \text{V}$
– Internal resistance $r = 0.1\ \Omega$
– External resistance $R = 3.9\ \Omega$
Total resistance in the circuit: $R_{\text{total}} = R + r = 3.9 + 0.1 = 4\ \Omega$
Current in the circuit:
$$I = \frac{E}{R_{\text{total}}} = \frac{2}{4} = 0.5\ \text{A}$$
Terminal voltage across the cell:
$$V = E – Ir = 2 – (0.5 \times 0.1) = 2 – 0.05 = 1.95\ \text{V}$$
Thus, correct answer is option (2) 1.95 V
24. Two cells of emfs $E_1$ and $E_2$ and internal resistances $r_1$ and $r_2$ ($E_2 > E_1$ and $r_2 > r_1$) respectively, are connected in parallel as shown in figure. The equivalent emf of the combination is $E_{\text{eq}}$. Then

(1) $E_1 < E_{\text{eq}} < E_2$ and $E_{\text{eq}}$ is nearer $E_2$
(2) $E_{\text{eq}} > E_2$
(3) $E_{\text{eq}} < E_1$
(4) $E_1 < E_{\text{eq}} < E_2$ and $E_{\text{eq}}$ is nearer $E_1$
Answer: (4) $E_1 < E_{\text{eq}} < E_2$ and $E_{\text{eq}}$ is nearer $E_1$
Solution:
For two cells in parallel, the equivalent emf is given by:
$$E_{\text{eq}} = \frac{E_1 r_2 + E_2 r_1}{r_1 + r_2}$$
Given: $E_2 > E_1$ and $r_2 > r_1$
This implies $E_{\text{eq}}$ lies between $E_1$ and $E_2$.
Also, since $r_2 > r_1$, the emf is weighted more toward $E_1$, hence:
$$E_1 < E_{\text{eq}} < E_2 \quad \text{and} \quad E_{\text{eq}} \text{ is nearer } E_1$$
Thus, correct answer is option (4) $E_1 < E_{\text{eq}} < E_2$ and $E_{\text{eq}}$ is nearer $E_1$
25. The variations of resistivity $\rho$ with absolute temperature T for three different materials X, Y and Z are shown in the graph below. Identify the materials X, Y and Z.

(1) X โ copper, Y โ semiconductor, Z โ nichrome
(2) X โ semiconductor, Y โ nichrome, Z โ copper
(3) X โ nichrome, Y โ copper, Z โ semiconductor
(4) X โ copper, Y โ nichrome, Z – semiconductor
Answer: (4) X โ copper, Y โ nichrome, Z – semiconductor
Solution:
The variation of resistivity $\rho$ with absolute temperature $T$ can help identify materials:
- For metals like copper, resistivity increases rapidly with temperature. This matches curve X.
- For alloys like nichrome, resistivity increases slowly and almost linearly. This matches curve Y.
- For semiconductors, resistivity decreases with temperature. This matches curve Z.
So, the correct matching is:
$$\text{X: Copper}, \quad \text{Y: Nichrome}, \quad \text{Z: Semiconductor}$$
Thus, correct answer is option (4) X โ copper, Y โ nichrome, Z โ semiconductor.
26. Given, a current carrying wire of non-uniform cross-section, which of the following is constant throughout the length of wire?
(1) Drift speed
(2) Current and drift sped
(3) Current only
(4) Current, electric field and drift speed
Answer: (3) Current only
Solution:
In a current-carrying wire of non-uniform cross-section, the current remains the same throughout the wire due to conservation of charge (no accumulation of charge), even if the area changes.
The drift speed $v_d$ is given by:
$$v_d = \frac{I}{n A e}$$
where $I$ is the current, $n$ is the number density of charge carriers, $A$ is the cross-sectional area, and $e$ is the charge of an electron.
Since $A$ varies along the wire, $v_d$ must also vary to keep $I$ constant.
Similarly, the electric field $E$ also varies because the potential gradient (and thus resistivity per unit length) changes along the wire.
Therefore, only the current remains constant throughout the wire.
Thus, correct answer is option (3) Current only
27. The graph between variation of resistance of a metal wire as a function of its diameter keeping other parameters like length and temperature constant is
(1)

(2)

(3)

(4)

Answer: (3)
28. Two thin long parallel wires separated by a distance โ$r$โ from each other in vacuum carry a current of $I$ ampere in opposite directions. Then, they will
(1) Attract each other with a force per unit length of $\frac{\mu_0 I^2}{2 \pi r}$
(2) Repel each other with a force per unit length of $\frac{\mu_0 I^2}{2 \pi r}$
(3) Repel each other with a force per unit length of $\frac{\mu_0 I^2}{2 \pi r^2}$
(4) Attract each other with a force per unit length of $\frac{\mu_0 I^2}{2 \pi r^2}$
Answer: (2) Repel each other with a force per unit length of $\frac{\mu_0 I^2}{2 \pi r}$
29. A solenoid is 1m long and 4 cm in diameter. It has five layers of windings of 1000 turns each and carries a current of 7A. The magnetic field at the centre of the solenoid is
(1) $0.4396 \times 10^{-5} \, \text{T}$
(2) $4.396 \times 10^{-2} \, \text{T}$
(3) $43.96 \times 10^{-2} \, \text{T}$
(4) $439.6 \, \text{T}$
Answer: (2) $4.396 \times 10^{-2} \, \text{T}$
Solution:
The magnetic field at the center of a solenoid is given by: $B = \mu_0 n I$
Where:
– $\mu_0 = 4\pi \times 10^{-7} \, \text{Tยทm/A}$
– $n$ is the number of turns per unit length
– $I$ is the current through the solenoid
Given:
– Total number of turns: $N = 5 \times 1000 = 5000$
– Length of solenoid: $l = 1 \, \text{m}$
– Current: $I = 7 \, \text{A}$
Turns per unit length: $n = \frac{N}{l} = \frac{5000}{1} = 5000 \, \text{turns/m}$
Now substituting into the formula:
$B = 4\pi \times 10^{-7} \times 5000 \times 7$
$B \approx 4.396 \times 10^{-2} \, \text{T}$
So, the correct answer is option $\boxed{(2) \quad 4.396 \times 10^{-2} \, \text{T}}$
30. Two similar galvanometers are covered into an ammeter and a milliammeter. The shunt resistance of ammeter as compared to the shunt resistance of milliammeter will be
(1) Zero
(2) More
(3) Less
(4) Equal
Answer: (3) Less
Solution:
To convert a galvanometer into an ammeter or milliammeter, a shunt resistance is connected in parallel with the galvanometer.
The value of shunt resistance $R_s$ is given by:
$$R_s = \frac{I_g R_g}{I – I_g}$$
where:
$I$ = total current to be measured
$I_g$ = full scale deflection current of galvanometer
$R_g$ = resistance of the galvanometer
Now consider two cases:
– For an ammeter, $I$ is large, so the denominator $I – I_g$ becomes large. This makes $R_s$ small.
– For a milliammeter, $I$ is small, so $I – I_g$ is small, making $R_s$ large.
Hence, the shunt resistance of an ammeter is less than that of a milliammeter.
Thus, the correct answer is option (3) Less.
31. Which of the following statements is true in respect of diamagnetic susbtances?
(1) They are feebly attracted by magnets
(2) Permeability is greater than 1000
(3) Susceptibility decreases with temperature.
(4) Susceptibility is small and negative
Answer: (4) Susceptibility is small and negative
Solution: Susceptibility of diamagnetic substance is small & negative
Diamagnetic substances are characterized by the following properties:
– They are repelled by a magnetic field (not attracted).
– Their magnetic susceptibility $ \chi $ is small and negative.
– The magnetic permeability $ \mu $ is slightly less than $ \mu_0 $ (the permeability of free space).
– Their susceptibility does not depend significantly on temperature.
Thus, the correct answer is option (4) Susceptibility is small and negative.
32. Identify the correct statement
(1) A current carrying conductor produces an electric field around it.
(2) A straight current carrying conductor has circular magnetic field lines around it.
(3) The direction of magnetic field due to a current element is given by Flemings Left Hand Rule
(4) The magnetic field inside a solenoid is non-uniform
Answer: (2) A straight current carrying conductor has circular magnetic field lines around it.
Solution:
Statement (1): A current carrying conductor produces an electric field around it.
- A steady current produces a magnetic field around the conductor, not an external electric field.
- Thus, this statement is not correct.
Statement (2): A straight current carrying conductor has circular magnetic field lines around it.
- A current in a straight conductor produces magnetic field lines that form concentric circles around the wire.
- This follows from the Right-Hand Thumb Rule.
- This statement is correct.
Statement (3): The direction of magnetic field due to a current element is given by Flemingโs Left Hand Rule.
- Flemingโs Left Hand Rule gives the direction of force on a current-carrying conductor in a magnetic field.
- It does not give the direction of the magnetic field produced by a current element.
- Thus, this statement is not correct.
Statement (4): The magnetic field inside a solenoid is non-uniform.
- Inside a long solenoid, the magnetic field is almost uniform.
- Thus, this statement is not correct.
So, correct answer is option (2) A straight current carrying conductor has circular magnetic field lines around it.
33. Which of the following graphs represents the variation of magnetic field B with perpendicular distance โrโ from an infinitely long, straight conductor carrying current?
(1)

(2)

(3)

(4)

Answer: (2)
Solution:
According to BiotโSavart law, the magnetic field at a distance $r$ from an infinitely long straight conductor carrying current $I$ is:
$$B = \frac{\mu_0 I}{2\pi r}$$
This implies that $B \propto \frac{1}{r}$, meaning the magnetic field decreases hyperbolically with distance.
Thus, the correct graph is Option (2).
34. If we consider an electron and a photon of same de-Broglie wavelength, then they will have same
(1) Angular momentum
(2) Energy
(3) Velocity
(4) Momentum
Answer: (4) Momentum
Solution:
If we consider an electron and a photon of same de-Broglie wavelength, then we use the de-Broglie relation:
$$\lambda = \frac{h}{p}$$
Where:
– $\lambda$ is the de-Broglie wavelength,
– $h$ is Planck’s constant,
– $p$ is the momentum.
Given that both the electron and the photon have the same de-Broglie wavelength $\lambda$, and since $h$ is a constant, this implies:
$$p_{\text{electron}} = p_{\text{photon}}$$
So, their momentum is the same.
Now let us evaluate the options:
1. Angular momentum: Depends on rotational motion and is not directly related to de-Broglie wavelength. Not necessarily the same.
2. Energy: For photon, $E = pc$, and for an electron (non-relativistic), $E = \frac{p^2}{2m}$. So energy is not necessarily the same.
3. Velocity: Photon always travels at speed of light $c$, while electron moves much slower. So velocity is not the same.
4. Momentum: As shown, both have same momentum because $\lambda$ is the same.
Hence, the correct answer is option (4) Momentum
35. The anode voltage of a photocell is kept fixed. The frequency of the light falling on the cathode is gradually increased. Then the correct graph which shows the variation of photo current I with the frequency v of incident light is
(1)

(2)

(3)

(4)

Answer: (1)
36. When a bar magnet is pushed towards the coil, along its axis, as shown in the figure, the galvanometer pointer deflects towards X. When this magnet is pulled away from the coil, the galvanometer pointer

(1) Deflects towards X$^1$
(2) Does not deflect
(3) Oscillates
(4) Deflects towards X
Answer: (1) Deflects towards X$^1$
Solution:
According to Faraday’s law of electromagnetic induction, an emf is induced in a coil when there is a change in magnetic flux linked with it.
When a bar magnet is pushed towards the coil, the magnetic flux through the coil increases. This change induces a current in a specific direction, and the galvanometer needle deflects towards side X.
When the magnet is pulled away, the magnetic flux through the coil decreases. This also induces a current, but in the opposite direction. Hence, the galvanometer needle now deflects in the opposite direction, i.e., towards X$^1$.
This behavior is consistent with Lenz’s law, which states that the induced current always flows in a direction such that it opposes the change in magnetic flux.
Therefore, the correct answer is: $\boxed{1.\ \text{Deflects towards } X^1}$
37. A square loop of side 2 m lies in the Y-Z plane in a region having a magnetic field $\vec{B} = (5\hat{i} + 3\hat{j} – 4\hat{k}) \, \text{T}$.
The magnitude of magnetic flux through the square loop is
(1) 20 Wb
(2) 12 Wb
(3) 16 Wb
(4) 10 Wb
Answer: (1) 20 Wb
Solution:
Given: Side of square loop = 2 m, and the loop lies in the Y-Z plane. The magnetic field is $\vec{B} = 5\hat{i} + 3\hat{j} – 4\hat{k}$
Since the loop lies in the Y-Z plane, its area vector is along the X-axis i.e., $\hat{i}$ direction.
Area of the square loop is $A = 2 \times 2 = 4 \ \text{m}^2$
Only the $\hat{i}$$ component of $\vec{B}$ contributes to magnetic flux, as $\vec{A}$ is along $\hat{i}$.
Magnetic flux is $\phi = \vec{B} \cdot \vec{A} = B_x \cdot A = 5 \cdot 4 = 20 \ \text{Wb}$
$$\boxed{20 \ \text{Wb}}$$
Thus, correct answer is option (1) 20 Wb
38. In domestic electric mains supply, the voltage and the current are
(1) AC voltage and DC current
(2) DC voltage and DC current
(3) DC voltage and AC current
(4) AC voltage and AC current
Answer: (4) AC voltage and AC current
Solution:
In domestic electric mains supply, both the voltage and the current alternate with time. This means they periodically change direction and magnitude.
The mains supply we receive is typically AC (Alternating Current). In most countries, it is a 50 Hz or 60 Hz AC supply.
Therefore, both voltage and current are AC in nature.
Thus, correct answer is option $\boxed{4.\ \text{AC voltage and AC current}}$
39. A sinusoidal voltage produced by an AC generator at any instant t is given by an equation V = 311 sin 314 t. The rms value of voltage and frequency are respectively
(1) 200V, 50 Hz
(2) 220 V, 100 Hz
(3) 220 V, 50 Hz
(4) 200V, 100 Hz
Answer: (3) 220 V, 50 Hz
Solution:
The given AC voltage equation is: $$V = 311 \sin(314 t)$$
This is of the standard form: $$V = V_0 \sin(\omega t)$$
Where:
– $$V_0$$ is the peak voltage,
– $$\omega$$ is the angular frequency.
From the equation:
– Peak voltage $$V_0 = 311 \ \text{V}$$
– Angular frequency $$\omega = 314 \ \text{rad/s}$$
Now, frequency is given by:
$$f = \frac{\omega}{2\pi} = \frac{314}{2\pi} \approx \frac{314}{6.28} = 50 \ \text{Hz}$$
RMS voltage is given by:
$$V_{\text{rms}} = \frac{V_0}{\sqrt{2}} = \frac{311}{\sqrt{2}} \approx 220 \ \text{V}$$
Therefore, the rms value of voltage and frequency are:
$$\boxed{220 \ \text{V}, \ 50 \ \text{Hz}}$$
Thus, correct answer is option (3) 220 V, 50 Hz.
40. A series LCR circuit containing an AC source of 100 V has an inductor and a capacitor of reactances $24\,\Omega$ and $16\,\Omega$ respectively. If a resistance of $6\,\Omega$ is connected in series, then the potential difference across the series combination of inductor and capacitor only is:
(1) 80 V
(2) 400 V
(3) 8 V
(4) 40 V
Answer: (1) 80 V
Solution:
Given:
– AC source voltage $$V = 100 \ \text{V}$$
– Inductive reactance $$X_L = 24 \ \Omega$$
– Capacitive reactance $$X_C = 16 \ \Omega$$
– Resistance $$R = 6 \ \Omega$$
Net reactance of inductor and capacitor:
$$X = X_L – X_C = 24 – 16 = 8 \ \Omega$$
Impedance of the LCR circuit:
$$Z = \sqrt{R^2 + (X_L – X_C)^2} = \sqrt{6^2 + 8^2} = \sqrt{36 + 64} = \sqrt{100} = 10 \ \Omega$$
Current in the circuit:
$$I = \frac{V}{Z} = \frac{100}{10} = 10 \ \text{A}$$
Potential difference across the combination of inductor and capacitor:
$$V_{LC} = I \cdot X = 10 \cdot 8 = 80 \ \text{V}$$
Thus, correct answer is option $\boxed{\text{(1) 80 V }}$
41. Match the following types of waves with their wavelength ranges
| Waves | Wavelength ranges |
| i. Microwave | a. 700 nm to 400 nm |
| ii. Visible light | b. 1nm to 10$^{-3}$ nm |
| iii. Ultraviolet | c. 0.1m to 1mm |
| iv. X-rays | d. 400 nm to 1 nm |
(1) i-c, ii-a,iii-d, iv-b
(2) i-d, ii-b, iii-c, iv-a
(3) i-b, ii-c, iii-a, iv-d
(4) i-a, ii-d, iii-b, iv-c
Answer: (1) i-c, ii-a,iii-d, iv-b
Solution:
We need to match each type of wave with its correct wavelength range:
i. Microwave: These waves have wavelengths from $0.1 \ \text{m}$ to $1 \ \text{mm}$
โ Match with option c
ii. Visible light: Has wavelengths from $700 \ \text{nm}$ (red) to $400 \ \text{nm}$ (violet)
โ Match with option a
iii. Ultraviolet: Lies just beyond visible light, approximately from $400 \ \text{nm}$ to $1 \ \text{nm}$
โ Match with option d
iv. X-rays: Have even shorter wavelengths, from $1 \ \text{nm}$ down to about $10^{-3} \ \text{nm}$
โ Match with option b
So the correct matching is:
– i โ c
– ii โ a
– iii โ d
– iv โ b
Thus, correct answer is option (1) i-c, ii-a,iii-d, iv-b
42. A ray of light passes from vaccum into a medium of refractive index n. If the angle of incidence is twice the angle of refraction, then the angle of incidence in terms of refractive index is
(1) $\sin^{-1} \left( \frac{n}{2} \right)$
(2) $2\cos^{-1} \left( \frac{n}{2} \right)$
(3) $2\sin^{-1} \left( \frac{n}{2} \right)$
(4) $\cos^{-1} \left( \frac{n}{2} \right)$
Answer: (2) $2\cos^{-1} \left( \frac{n}{2} \right)$
Solution:
Let the angle of refraction be $r$.
Then, the angle of incidence is $i = 2r$.
Using Snell’s Law: $n = \frac{\sin i}{\sin r}$
Substitute $i = 2r$: $n = \frac{\sin(2r)}{\sin r}$
Using the identity $\sin(2r) = 2\sin r \cos r$, we get:
$$n = \frac{2\sin r \cos r}{\sin r} = 2 \cos r$$
So, $\cos r = \frac{n}{2}$
Therefore, $r = \cos^{-1}\left(\frac{n}{2}\right)$
And since $i = 2r$, we get:
$$i = 2 \cos^{-1}\left(\frac{n}{2}\right)$$
Thus, correct answer is option(2) $2\cos^{-1} \left( \frac{n}{2} \right)$
43. A convex lens has power P. It is cut into two halves along its principal axis. Further one piece (out of two halves) is cut into two halves perpendicular to the principal axis as shown in figure. Choose the incorrect option for the reported lens pieces

(1) Power of $L_2$ is $\frac{P}{2}$
(2) Power of $L_3$ is $\frac{P}{2}$
(3) Power of $L_1$ is $P$
(4) Power of $L_1$ is $\frac{P}{2}$
Answer: (4) Power of $L_1$ is $\frac{P}{2}$
44. The image formed by an objective lens of a compound microscope is
(1) Real and diminished
(2) Real and enlarged
(3) Virtual and enlarged
(4) Virtual and diminished
Answer: (2) Real and enlarged
Solution:
In a compound microscope, there are two lenses: the objective lens and the eyepiece (or ocular lens).
- The objective lens is placed very close to the object.
- It forms an image that is:
- Real (can be projected),
- Inverted, and
- Enlarged.
This real and enlarged image is formed inside the focal length of the eyepiece, which then magnifies it further to give a virtual, enlarged final image.
Therefore, the image formed by the objective lens is Real and enlarged. So, correct answer is option (2) Real and enlarged.
45. If $r$ and $r’$ denote the angles inside the prism having angle of prism $50^\circ$ considering that during interval of time from $t = 0$ to $t = t$, $r$ varies with time as $r = 10^\circ + t^2$. During the time $r’$ will vary with time as

(1) $40^\circ + t^2$
(2) $50^\circ – t^2$
(3) $50^\circ + t^2$
(4) $40^\circ – t^2$
Answer: (4) $40^\circ – t^2$
Solution:
Given:
– Angle of the prism $A = 50^\circ$
– Angle of incidence inside the prism: $r$
– Angle of emergence inside the prism: $r^1$
– It is known that: $r + r^1 = A = 50^\circ$
– Given: $r = 10^\circ + t^2$
We use the relation: $ r + r^1 = 50^\circ $
Substituting $r$:
$$ (10^\circ + t^2) + r^1 = 50^\circ $$
Solving for $r^1$:
$$ r^1 = 50^\circ – (10^\circ + t^2) $$
$$ r^1 = 40^\circ – t^2 $$
Therefore, the correct expression for $r^1$ is:
$$ r^1 = 40^\circ – t^2 $$
So, correct answer is option (4) $40^\circ – t^2$
46. If AB is incident plane wave front then refracted wave front in ($n_2$ > $n_1$)

(1)

(2)

(3)

(4)

Answer: (1)
Solution:
Given:
– A plane wavefront $AB$ is incident on a lens.
– Refractive index changes from $n_1$ to $n_2$ such that $n_2 > n_1$.
According to Huygens’ Principle:
– In a medium with higher refractive index ($n_2$), the speed of light is lower, so the secondary wavelets travel shorter distances.
– As a result, the wavefront bends toward the normal, or in other words, it converges.
This causes the refracted wavefront to become curved and converge (i.e., it will form part of a sphere with center toward the side of propagation).
Thus, from the given options, the only diagram that shows a converging refracted wavefront is Option (1)
47. The total energy carried by the light wave when it travels from a rarer to a non-reflecting and nonabsorbing medium
(1) remains same
(2) increases
(3) either increases or decreases depending upon angle of incidence
(4) decreases
Answer: (1) remains same
Explanation:
When a light wave travels from a rarer medium to a denser medium that is non-reflecting and non-absorbing, the following happens:
- There is no reflection at the interface (because the medium is non-reflecting).
- There is no absorption or loss of energy inside the medium (because the medium is non-absorbing).
Since there is no loss or gain of energy in the process, the total energy carried by the light wave remains unchanged.
Therefore, the total energy remains the same. So, correct answer is Option (1) remains same.
48. If the radius of first Bohr orbit is r, then the radius of the second Bohr orbit will be
(1) $8r$
(2) $4r$
(3) $2 \sqrt{2}r$
(4) $2r$
Answer: (2) $4r$
Solution:
Given: The radius of the first Bohr orbit is $r$.
According to Bohr’s model, the radius of the $n$-th orbit is proportional to:
$$ r \propto \frac{n^2}{Z} $$
For a hydrogen atom, $Z = 1$, so:
$$ r_n = r \cdot n^2 $$
Now for the second orbit:
$$ n = 2 $$
$$ r_2 = 2^2 \cdot r = 4r $$
Therefore, the radius of the second Bohr orbit is:
$$ 4r $$
Therefore, the correct answer is option (2) 4r.
49. Match the following types of nuclei with examples shown
| Column – I | Column – II |
| A. Isotopes | i. $Li^7$, $Be^7$ |
| B. Isobars | ii. $_8O^{18}$, $_9F^{19}$ |
| C. Isotopes | iii. $_1H^1$, $_1H^2$ |
(1) A-ii, B-iii, C-i
(2) A-i, B-iii, C-ii
(3) A-iii, B-ii, C-i
(4) A-iii, B-i, C-ii
Answer: (4) A-iii, B-i, C-ii
Solution:
Let us match each type of nuclei with the given examples:
A. Isotopes โ Nuclei having the same atomic number but different mass numbers.
- Example: $^1H$, $^2H$ (both hydrogen isotopes)
- Match: iii
B. Isobars โ Nuclei having the same mass number but different atomic numbers.
- Example: $^7Li$, $^7Be$ (mass number = 7)
- Match: i
C. Isotones โ Nuclei having the same number of neutrons but different atomic and mass numbers.
- Example: $^{18}_8O$, $^{19}_9F$
- Neutrons in oxygen = $18 – 8 = 10$
- Neutrons in fluorine = $19 – 9 = 10$
- Match: ii
So, the correct matching is:
- A โ iii
- B โ i
- C โ ii
Thus, correct answer is option (4) A-iii, B-i, C-ii
50. Which of the following statements is incorrect with reference of โNuclear forceโ?
(1) Nuclear force becomes attractive for nucleon distances larger than 0.8 fm
(2) Nuclear force becomes repulsive for nucleon distances less then 0.8fm
(3) Nuclear force is always attractive
(4) Potential energy is minimum, if the separation between the nucleons is 0.8 fm
Answer: (3) Nuclear force is always attractive
Solution:
Nuclear force is a short-range force that acts between nucleons (protons and neutrons). Its nature depends on the distance between the nucleons:
– For distances less than 0.8 fm, the nuclear force is repulsive. This prevents the nucleons from collapsing into each other.
– For distances around 0.8 fm to 2.5 fm, the nuclear force is strongly attractive, which holds the nucleons together in the nucleus.
– At larger distances, it becomes negligible.
– The potential energy is minimum (most stable) when the nucleon separation is around 0.8 fm.
Now examine the options:
(1) Nuclear force becomes attractive for nucleon distances larger than 0.8 fm โ Correct
(2) Nuclear force becomes repulsive for nucleon distances less than 0.8 fm โ Correct
(3) Nuclear force is always attractive โ Incorrect
(4) Potential energy is minimum if the separation between nucleons is 0.8 fm โ Correct
Therefore, the incorrect statement is Nuclear force is always attractive. So, correct answer is option (3).
51. The range of electrical conductivity $(\sigma)$ and resistivity $(\rho)$ for metals, among the following, is
(1) $\rho \rightarrow 10^{-5} – 10^{-6} \, \Omega \, \text{m}$
$\sigma \rightarrow 10^5 – 10^6 \, \text{Sm}^{-1}$
(2) $\rho \rightarrow 10^{11} – 10^{19} \, \Omega \, \text{m}$
$\sigma \rightarrow 10^{-11} – 10^{-19} \, \text{Sm}^{-1}$
(3) $\rho \rightarrow 10^2 – 10^8 \, \Omega \, \text{m}$
$\sigma \rightarrow 10^{-2} – 10^{-8} \, \text{Sm}^{-1}$
(4) $\rho \rightarrow 10^{-2} – 10^{-8} \, \Omega \, \text{m}$
$\sigma \rightarrow 10^2 – 10^8 \, \text{Sm}^{-1}$
Answer: (4) $\rho \rightarrow 10^{-2} – 10^{-8} \, \Omega \, \text{m}$
$\sigma \rightarrow 10^2 – 10^8 \, \text{Sm}^{-1}$
Solution:
For metals:
– Electrical resistivity $(\rho)$ is low, typically in the range of:
$$ \rho \approx 10^{-8} \text{ to } 10^{-2} \ \Omega \cdot \text{m} $$
– Electrical conductivity $(\sigma)$ is high, since:
$$ \sigma = \frac{1}{\rho} $$
Therefore, the conductivity of metals lies approximately in the range:
$$ \sigma \approx 10^2 \text{ to } 10^8 \ \text{S/m} $$
Now, comparing with the options:
Option (4) gives:
– $\rho \rightarrow 10^{-2} \text{ to } 10^{-8} \ \Omega \cdot \text{m}$
– $\sigma \rightarrow 10^2 \text{ to } 10^8 \ \text{S/m}$
Which matches the known range for metals.
Thus, correct answer is option (4).
52. Which of the following statements is correct for an n-type semiconductor?
(1) The donor energy level lies closely above the top of the valance band
(2) The donor energy level lies at the half way mark of forbidden energy gap
(3) The donor energy level does not exist
(4) The donor energy level lies just the bottom of the conduction band
Answer: (4) The donor energy level lies just the bottom of the conduction band
Solution:
In an n-type semiconductor:
– Pentavalent impurities (like P, As) are added to a pure semiconductor (like Si or Ge).
– These impurities donate extra electrons to the conduction band.
– The energy level associated with these donor atoms is called the donor energy level.
Key point:
– The donor energy level lies just below the conduction band, meaning very little energy is needed for electrons to move into the conduction band and become free carriers.
Incorrect Options:
(1) Lies above the valence band โ This is typical for p-type semiconductors, not n-type.
(2) Lies halfway in the gap โ Incorrect; that would make excitation very difficult.
(3) Donor level does exist โ So this option is false.
Correct statement: is (4) The donor energy level lies just below the conduction band
So, correct answer is option (4).
53. The circuit shown in figure contains two ideal diodes $D_1$ and $D_2$. If a cell of emf 3V and negligible internal resistance is connected as shown, then the current through $70\,\Omega$ resistance, (in ampere) is

(1) 0.01
(2) 0.02
(3) 0.03
(4) 0
Answer: (3) 0.03
54. In determining the refractive index of a glass slab using a travelling microscope, the following readings are tabulated
(a) Reading of travelling microscope for ink mark = 5.123 cm
(b) Reading of travelling microscope for ink mark through glass slab = 6.123 cm
(c) Reading of travelling microscope for chalk dust on glass slab = 8.123 cm
From the data, the refractive index of a glass slab is
(1) 1.500
(2) 1.601
(3) 1.399
(4) 1.390
Answer: (1) 1.500
55. In an experiment to determine the figure of merit of a galvanometer by half deflection method, a student constructed the following circuit.

He unplugged a resistance of $5200\,\Omega$ in $R$. When $K_1$ is closed and $K_2$ is open, the deflection observed in the galvanometer is 26 div. When $K_2$ is also closed and a resistance of $90\,\Omega$ is removed in $S$, the deflection becomes 13 div. The resistance of galvanometer is nearly:
(1) $45.0\,\Omega$
(2) $103.0\,\Omega$
(3) $91.6\,\Omega$
(4) $116.0\,\Omega$
Answer: (3) $91.6\,\Omega$
Solution:
In the half-deflection method, the resistance of the galvanometer $G$ is calculated using the formula:
$$ G = \frac{R \cdot S}{R – S} $$
Where:
– $R$ is the resistance in series with the galvanometer when full deflection occurs
– $S$ is the shunt resistance that reduces the deflection to half
Given:
– $R = 5200 \, \Omega$
– Deflection = 26 divisions when $K_1$ is closed and $K_2$ is open
– When $K_2$ is also closed and $S = 90 \, \Omega$ is removed (i.e. shunt resistance added), deflection becomes 13 divisions (half of 26)
โ So, half-deflection condition is satisfied.
Now apply the formula:
$$ G = \frac{5200 \cdot 90}{5200 – 90} $$
$$ G = \frac{468000}{5110} \approx 91.6 \, \Omega $$
Hence, the resistance of the galvanometer is nearly:
$$ G = 91.6 \, \Omega $$
Thus, correct answer is option (3) $91.6\,\Omega$
56. While determining the coefficient of viscosity of the given liquid, a spherical steel ball sinks by a distance h = 0.9m. The radius of the ball $r = \sqrt{3} \times 10^{-3}m$. The time taken by the ball to sink in three trails are tabulated as follows.
| Trial No. | Time taken by the ball to fall by h (in second) |
| 1. | 2.75 |
| 2. | 2.65 |
| 3. | 2.70 |
The difference between the densities of the steel ball and the liquid is 7000 kg m$^{-3}$. If g = 10ms$^{-2}$, then the coefficient of viscosity of the given liquid at room temperature is
(1) 0.14 Pa.s
(2) 0.14 $\times$ 10$^{-3}$ Pa.s
(3) 14 Pa.s
(4) 0.28 Pa.s
Answer: (1) 0.14 Pa.s
Solution:
Given:
– Distance fallen by ball, $h = 0.9 \, \text{m}$
– Radius of ball, $r = \sqrt{3} \times 10^{-3} \, \text{m}$
– Density difference, $\Delta \rho = 7000 \, \text{kg/m}^3$
– Acceleration due to gravity, $g = 10 \, \text{m/s}^2$
– Time taken (average of 3 trials):
$$ t = \frac{2.75 + 2.65 + 2.70}{3} = \frac{8.10}{3} = 2.70 \, \text{s} $$
Step 1: Terminal velocity
$$ v = \frac{h}{t} = \frac{0.9}{2.7} = 0.333 \, \text{m/s} $$
Step 2: Stokes’ Law Formula
For a spherical ball falling through a viscous liquid:
$$ \eta = \frac{2}{9} \cdot \frac{r^2 \cdot g \cdot (\rho_s – \rho_l)}{v} $$
Substitute the values:
– $r = \sqrt{3} \times 10^{-3}$
– $g = 10$
– $\Delta \rho = 7000$
– $v = 0.333$
Step 3: Calculate viscosity
$$ \eta = \frac{2}{9} \cdot \frac{(\sqrt{3} \times 10^{-3})^2 \cdot 10 \cdot 7000}{0.333} $$
$$ \eta = \frac{2}{9} \cdot \frac{3 \times 10^{-6} \cdot 10 \cdot 7000}{0.333} $$
$$ \eta = \frac{2}{9} \cdot \frac{210000 \times 10^{-6}}{0.333} $$
$$ \eta = \frac{2}{9} \cdot \frac{0.21}{0.333} \approx \frac{2}{9} \cdot 0.63 \approx 0.14 \, \text{Paยทs} $$
Thus, correct answer is option (1) 0.14 Pa.s
57. Which of the following expression can be deduced on the basis of dimensional analysis? (All symbols have their usual meanings)
(1) $x = A \cos \omega t$
(2) $N = N_0 e^{-\lambda t}$
(3) $F = 6 \pi \eta r v$
(4) $s = ut + \frac{1}{2} at^2$
Answer: (3) $F = 6 \pi \eta r v$
58. Two stones begin to fall from rest from the same height, with the second stone starting to fall ‘$\Delta t$’ seconds after the first falls from rest. The distance of separation between the two stones becomes โ$H$โ, โ$t_0$โ seconds after the first stone starts its motion. Then $t_0$ is equal to
(1) $\frac{H}{\Delta t} + \frac{\Delta t}{2g}$
(2) $\frac{H}{g \Delta t} – \frac{\Delta t}{2}$
(3) $\frac{H}{g \Delta t} + \frac{\Delta t}{2}$
(4) $\frac{H}{g \Delta t}$
Answer: (3) $\frac{H}{g \Delta t} + \frac{\Delta t}{2}$
Solution:
Let the first stone start falling at $t = 0$, and the second stone starts after a delay of $\Delta t$ seconds.
Let $t_0$ be the time after which the separation between the two stones is $H$.
Displacement of first stone in time $t_0$:
$$ S_1 = \frac{1}{2} g t_0^2 $$
Displacement of second stone in time $(t_0 – \Delta t)$:
$$ S_2 = \frac{1}{2} g (t_0 – \Delta t)^2 $$
Separation between the two stones at time $t_0$:
$$ S_1 – S_2 = H $$
Substitute:
$$ \frac{1}{2} g t_0^2 – \frac{1}{2} g (t_0 – \Delta t)^2 = H $$
Factor out $\frac{1}{2}g$:
$$ \frac{1}{2} g \left[ t_0^2 – (t_0 – \Delta t)^2 \right] = H $$
Use identity:
$$ (a – b)^2 = a^2 – 2ab + b^2 $$
So:
$$ t_0^2 – (t_0 – \Delta t)^2 = t_0^2 – (t_0^2 – 2 t_0 \Delta t + \Delta t^2) = 2 t_0 \Delta t – \Delta t^2 $$
Now:
$$ \frac{1}{2} g (2 t_0 \Delta t – \Delta t^2) = H $$
Multiply:
$$ g t_0 \Delta t – \frac{1}{2} g \Delta t^2 = H $$
Solve for $t_0$:
$$ g t_0 \Delta t = H + \frac{1}{2} g \Delta t^2 $$
Divide both sides by $g \Delta t$:
$$ t_0 = \frac{H}{g \Delta t} + \frac{\Delta t}{2} $$
Thus, Correct Answer is Option (3).
59. In the projectile motion of a particle on a level ground, which of the following remains constant with reference to time and position?
(1) Average velocity between any two points on the path
(2) Horizontal component of velocity
(3) Angle between the instantaneous velocity with the horizontal
(4) Vertical component of the velocity of the projectile
Answer: (2) Horizontal component of velocity
Solution:
In projectile motion on level ground:
– The horizontal component of velocity remains constant throughout the motion.
$$ u_x = u \cos \theta $$
This is because there is no acceleration in the horizontal direction (assuming air resistance is negligible).
Now, analyzing the options:
(1) Average velocity between any two points on the path
– This depends on the displacement and time between those points, which varies.
– So, it does not remain constant.
(2) Horizontal component of velocity
– This remains constant because no force acts horizontally.
– This is the correct answer.
(3) Angle between the instantaneous velocity and the horizontal
– This changes continuously during projectile motion as the direction of velocity changes.
(4) Vertical component of velocity
– This changes due to the acceleration from gravity.
Thus, Correct Answer is Option (2) Horizontal component of velocity
60. A particle is in uniform circular motion. The equation of its trajectory is given by $(x – 2)^2 + y^2 = 25$,
where $x$ and $y$ are in meter. The speed of the particle is $2 \, \text{ms}^{-1}$, when the particle attains the lowest
โyโ coordinate, the acceleration of the particle is (in $\text{ms}^{-2}$)
(1) $0.4 \hat{j}$
(2) $0.8 \hat{i}$
(3) $0.8 \hat{j}$
(4) $0.4 \hat{i}$
Answer: (3) $0.8 \hat{j}$
Solution:
The given equation of the particle’s motion is:
$$ (x – 2)^2 + y^2 = 25 $$
This is a circle with:
– Center at (2, 0)
– Radius $R = 5$ m
The particle is in uniform circular motion, so the acceleration is centripetal and always directed toward the center of the circle.
Given:
– Speed of the particle $v = 2 \, \text{m/s}$
– Radius $r = 5 \, \text{m}$
Centripetal acceleration is:
$$ a = \frac{v^2}{r} = \frac{2^2}{5} = \frac{4}{5} = 0.8 \, \text{m/s}^2 $$
Now, when the particle is at the lowest point on the circle, its position is: $x = 2$, $y = -5$
At this point, the acceleration is directed towards the center of the circle, which is at (2, 0), i.e., upward along the positive y-axis.
So the acceleration vector is: $ \vec{a} = 0.8 \, \hat{j} $
Thus, Correct Answer is Option (3) $0.8 \hat{j}$



