Table of Contents
- Preview:
- 9.0 Introduction:
- 9.1 How to analyse Chemical Composition?
- 9.2 Primary and Secondary Metabolites
- 9.3 Bio Macromolecules and Micromolecules
- 9.4 Proteins
- 9.5 Polysaccharides
- 9.6 Nucleic Acids
- 9.7 Structure of Proteins
- 9.8 Nature of Bond Linking Monomers in a Polymer
- 9.9 Dynamic State of Body Constituents Concept of Metabolism
- 9.10 Metabolic Basis for Living
- 9.11 The Living State
- 9.12 Enzymes
Preview:
- This is an interesting chapter that highlights the chemistry involved in biology. It unveils as we proceed, the underlying micro, nano and even smaller biomolecular structures.
- We shall begin by studying two types of analysis: Compound analysis and Elemental analysis which give an idea of the molecular formula and the probable structure of compounds.
- We shall then learn the three important biomolecules which form most part of the living tissues: a) Amino acids b) Fatty acids c) Nucleotides. Consequently, the concept of primary and secondary metabolites shall be dealt with. Primary metabolites are biomolecules that are essential to the growth of the cell. Secondary metabolites are the compounds derived from primary metabolites.
- The biomolecules will then be classified into two types depending on the molecular weight of the molecules: Micromolecules and Macromolecules. Next, we shall study some important constituents that form the macromoleclar fraction 1. Proteins (polypeptides made of linear chains of amino acids linked by peptide bonds), 2. Polysaccharides (long chains of monosaccharide units made of sugars), 3. Nucleic acids (chains of polynucleotides which are inturn made of nitrogen bases, pentose group and sugar), 4. Proteins (heteropolymers containing strings of amino acids).
- The bonds that form the protein is called the peptide bond, that which forms a polysaccharide is a glycosidic bond and the bond that link units in a nucleic acid is the phosphodiester bond. We shall see how these bonds are formed at the molecular level.
- The popular Watson and Crick model of DNA as a double helix structure shall then be described.
- Next, the process of metabolism shall be studied as a series of reactions by which biomolecules continuously undergo changes from one form to another by making and breaking bonds. Each of the steps of the series is what we call, metabolic pathway . There are two important metabolic pathways. They are: Anabolic (energy is consumed) and Catabolic (energy is liberated) Pathways.
- We shall study about enzymes which are proteins with catalytic property. We shall study about enzyme action as a chemical process, the factors that affect enzyme action and about its 6 major types Oxidoreductases and dehydrogenases, Transferases, Hydrolases, Lyases, Isomerases and Ligases.
- Finally, we will talk about cofactors which are non-protein molecules that bind to an enzyme to activate it. The types and importance of cofactors shall also be covered.
9.0 Introduction:
- Plant tissue, animal tissue and a microbial paste, all contain a list of elements like carbon, hydrogen, oxygen and several others elements. Their respective content per unit mass of a living tissue was also found.
- The same analysis performed on a piece of earth s crust as an example of non-living matter, produced a similar list of components.
- Thus, it was clear that all the elements present in a sample of earth s crust are also present in a sample of living tissue. However, a closer examination revealed that the relative abundance of carbon and hydrogen compared to other elements is higher in living organisms than in earth s crust as observed in Table 9.1.

9.1 How to analyse Chemical Composition?
Chemical Analysis (or) Compound analysis:
- Any living tissue (like, a vegetable or a piece of liver) is taken and grinded in trichloroacetic acid ($Cl_3CCOOH$) using a mortar and a pestle until a thick slurry is obtained.
- The slurry is then strained through a cheesecloth or cotton. Two fractions are obtained one is called the filtrate or the acid-soluble pool, and the second is the retentate or the acid-insoluble fraction.
- The acid soluble pool is then analysed.
- Through experiments, thousands of organic compounds were observed in the acid-soluble pool.
2. Elemental Analysis:
- An experiment to find the amount of inorganic elements and compounds in living organisms:
- A small amount of a living tissue (say a leaf or liver) is dried and weighed after all its water evaporates. This is called its dry weight.
- If the tissue is fully burnt, all the carbon compounds are oxidised to gaseous form (that is, to $CO_2$ and water vapour) and the gases are removed. What remains is the ash.
- The ash contains inorganic elements like calcium and magnesium; Inorganic compounds like sulphate and phosphate are also seen in the acid-soluble fraction as shown in the table:

Elemental analysis gives elemental composition of living tissues in the form of hydrogen, oxygen, chlorine and carbon, while compound analysis gives an idea of organic and inorganic constituents present in living tissues.
Advantage of the Analytical techniques:
When applied to the compound, analytical techniques give an idea of the molecular formula and the probable structure of the compound.
Biologically, the compounds are classified into amino acids, fatty acids and nucleotides.
1. Amino acids:
Amino acids are organic compounds containing an amino group and an acidic group as substituents on the same carbon that is, on the α-carbon. Hence, the name α-amino acid is assigned to them.
They are formed by the substitution of a methane group. There are four substituent groups occupying the four valence positions in amino acids. These are: hydrogen, carboxyl group, amino group and a variable group designated as R group.
Based on the nature of R group, there are many amino acids. However, there are twenty types which occur in proteins. The R group in these proteiniceous amino acids can be a hydrogen (then the amino acid is called glycine), a methyl group (alanine) and hydroxy methyl (serine). Three of the twenty are shown in Figure 9.1 below:

The chemical and physical properties of amino acids are determined by the amino, carboxyl and the R functional groups. For instance, one of the properties of amino acids is the ionizable nature of its $NH_2$ and COOH groups.
In solutions of different pHs, the structure of amino acids changes.

Types of amino acids:
a) Based on number of amino acid group and carboxyl group, there are acidic (For example, glutamic acid), basic (lysine) and neutral (valine) amino acids.
b) Aromatic amino acids are another group of amino acids. Examples include: tyrosine, phenylalanine and tryptophan.
2. Fatty acids:
- Fatty acids are a type of large group of molecules called, lipids. Lipids have phosphorous and a phosphorylated organic compound in them. In fact, these are called, phospholipids. They are found in cell membrane. Lecithin is one such example.
- Most of the fatty acids are insoluble in water.
- A fatty acid has a carboxyl group attached to an R group. The R group could be a methyl ( $CH_3$), or ethyl ( $C_2H_5$) or higher number of $CH_2$ groups (1 carbon to 19 carbons). For example, palmitic acid has 16 carbons including carboxyl carbon. Arachidonic acid has 20 carbon atoms including the carboxyl carbon. Another simple lipid is glycerol which is trihydroxy propane.
Types of Fatty acids based on presence or absence of double bonds:
a) Saturated Fatty acids: Those fatty acids without double bond are saturated fatty acids.
b) Unsaturated Fatty acids: Those fatty acids with one or more C=C double bonds are unsaturated fatty acids.
Fats and oils are triesters of glycerol and fatty acids formed by esterification reactions. They differ in the following respect:
Oils have lower melting point (like, gingely oil) and hence retain their liquid state even in winters while most fats solidify at moderate temperatures also, due to their high melting point.

Formation of monoglycerides, diglycerides and triglycerides by esterification of fatty acids with glycerol:

3. Nucleotides:
(We shall learn about this in detail under section 9.6)
The genetic materials, DNA and RNA are made of Polynucleotide chains.
Each nucleotide has three components:
a) A nitrogenous base: Two kinds of nitrogenous bases are present: Purines (double ring structures) and Pyramidines (single ring structures). Adenine and Guanine are purines. Cytosine, Uracil and Thymine are pyramidines.

b) A pentose sugar: The pentose sugar is ribose in case of RNA, and deoxyribose in case of DNA),

c) A phosphate group.
Example for a nucleotide:

Questions from section 9.1:
1. Explain compound analysis and elemental analysis techniques.
2. Write a note on the following biologically important compounds:
- Amino acids and its types
- Fatty acids and its types
- Nucleotides
9.2 Primary and Secondary Metabolites
Primary metabolites:
- Primary metabolites are biomolecules that are essential to the growth of the cell.
- They are produced continuously during the growth phase and are involved in primary metabolic processes such as respiration and photosynthesis.
- Primary metabolites include sugars, amino acids, tricarboxylic acids, energy sources, proteins, nucleic acids, and polysaccharides.
Secondary Metabolites:
- Secondary metabolites are the compounds derived from primary metabolites.
- They are not essential to sustain the life of cells.
- Most often, secondary metabolites are produced during non-growth phase of cells.
- Secondary metabolites are end products of primary metabolites and many of them are useful to human welfare; such as, alkaloids, steroids, essential oils, lignin, resins and tannins, flavonoids, rubber, antibiotics, coloured pigments, scents, gums and spice.

Questions from section 9.2:
- Write a note on primary and secondary metabolites.
9.3 Bio Macromolecules and Micromolecules
Chemical compounds found in living organisms are of two types:
Micromolecules: All the compounds found in the acid soluble pool have molecular weights ranging from 18 to around 800 daltons (Da). Thus, broadly, the compounds of acid soluble pool having molecular weight of less than 1000 daltons were categorized as micromolecules or simply biomolecules.
Macromolecules: Those molecules found in the acid insoluble fraction are called macromolecules or biomacromolecules. The acid insoluble fraction has four types of organic compounds: proteins, nucleic acids, polysaccharides and lipids. These compounds with the exception of lipids have molecular weights in the range of ten thousand daltons and above and are categorized under macromolecules.
Though the molecular weight of lipids does not exceed 800 Da, lipids come under acid insoluble fraction, or, macromolecular fraction. Why?
To answer this question, let us recall what constitutes for the acid soluble pool and the acid insoluble pool. The acid soluble pool is comprised roughly of the cytoplasmic composition while, the macromolecules from cytoplasm, the organelles and the cell envelope become the acid insoluble fraction. The acid soluble and the acid insoluble pool together represent the entire chemical composition of living tissues or organisms.
Lipids are small molecular weight compounds arranged into structures that form cell envelope; like, cell membrane.
When a tissue is ground, the cell structure is disrupted; that is, cell membrane and other membranes are broken into pieces which form vesicles. These vesicles are not water soluble. Therefore, these membrane fragments in the form of vesicles get separated along with the acid insoluble pool and hence become a part of the macromolecular fraction, though their molecular weights are lesser than 800 daltons. Thus, lipids that form membranes are not strictly macromolecules.
Chemical composition of living cells:

Questions from section 9.3:
- What are macromolecules and micromolecules?
- Justify the statement: Though the molecular weight of lipids does not exceed 800 Da, lipids come under acid insoluble fraction .
- Tabulate the chemical composition of living cells.
9.4 Proteins
- Proteins are polypeptides made of linear chains of amino acids linked by peptide bonds.
- An amino acid and a polypeptide chain are represented below:


| Concept box: A Monomer is a molecule belonging to any category of compounds, mostly organic, that can react with other molecules of the same type or a different type to form very large molecules called, polymers. |
Types of polymers:
Homopolymer: A homopolymer is made of a chain of only one type of monomer repeating n number of times.
Heteropolymer: A polymer chain made of two or more different types of monomers is a heteropolymer.
A protein is a heteropolymer and not a homopolymer since each protein is a polymer of amino acids and there are 20 types of amino acids (alanine, cysteine, proline, tryptophan, lysine, etc.)!
Types of amino acids:
Essential Amino acids: Certain amino acids essential for our health which have to be supplied through our diet are essential amino acids.
Non-essential amino acids: Those amino acids which our body can make are non-essential amino acids.
Proteins carry out many functions in living organisms as listed:
a) some transport nutrients across cell membrane,
b) some fight infectious organisms,
c) some form hormones and,
d) some are in the form of enzymes.

| Note box: Collagen is the most abundant protein in animals and Ribulose bisphosphate Carboxylase-Oxygenase (RuBisCO) is the most abundant protein in the whole of the biosphere. |
Questions from section 9.4:
- What is a protein? Give the structure of a protein and an amino acid.
- Define Monomer .
- What are homopolymers and heteropolymers?
- Explain the types of amino acids.
- State the functions of a protein.
9.5 Polysaccharides
- The acid insoluble pool also contains polysaccharides (carbohydrates) which again form a part of the macromolecules.
- Polysaccharides are long chains of monosaccharide units made of sugars. Polysaccharides are in the form of threads (literally a cotton thread).
Examples of polysaccharides:
a) Cellulose is a polysaccharide consisting of only one type of monosaccharide that is, glucose. Cellulose is thus a homopolymer.
b) Starch is a polysaccharide made of two types of glucose polymers amylose and amylopectin. Starch serves as the store house of energy in plant tissues.
c) Glycogen is a polysaccharide made only of large number of glucose units as monomers and is hence a homopolymer. Animals store most of the reserve energy in the form of glycogen.
d) Inulin is a polymer of fructose.
Structure of a polysaccharide:
- In a polysaccharide chain (say glycogen), the right end is called the reducing end and the left end is called the non-reducing end.
- Some polysaccharides have branches as shown in Figure 9.9:

- Starch forms helical secondary structures. In fact, starch can hold 12 molecules in the helical portion. The starch-12 is blue in colour.
- Cellulose does not contain complex helices and hence cannot hold 12. Plant cell walls are made of cellulose. Hence, paper made from plant pulp and cotton fibre is also cellulosic.
- Exoskeletons of arthropods, for example, have a complex polysaccharide called chitin. These complex polysaccharides are mostly homopolymers.
Questions from section 9.5:
- What are polysaccharides? Give examples.
- Explain the structure of a polysaccharide. Illustrate with an example.
9.6 Nucleic Acids
The other type of macromolecule that forms a part of the acid insoluble fraction of any living tissue is the nucleic acid.
Structure and composition of Nucleic acids:
- Nucleic acids are polynucleotide chains made of nucleotides as monomer units.
- There are three chemically distinct components in each nucleotide: One is a heterocyclic compound, the second is a monosaccharide and the third a phosphoric acid or phosphate.
- We shall now recall the structure of nucleotides from the first section.
- The heterocyclic compounds in nucleic acids are called nitrogenous bases. Two kinds of nitrogenous bases exist: Purines (double ring structures) and Pyramidines (single ring structures). Adenine (A) and Guanine (G) are purines. Cytosine (C), Uracil (U) and Thymine (T) are pyramidines.
- There are five types of nitrogenous bases found in nucleic acids: adenine, guanine, uracil, cytosine, and thymine. DNA contains A, C, G and T while RNA has A, C, G and U nitrogenous bases (refer figure below).

- The sugar found in polynucleotides is either ribose (a monosaccharide pentose) or 2 deoxyribose. The nucleic acid containing deoxyribose is called deoxyribonucleic acid (DNA) while that which contains ribose is called ribonucleic acid (RNA).
- In both DNA and RNA the phosphate group is linked to the 5th C of the sugar as shown in figure 9.10 above.
- Each nitrogenous base is linked to the pentose sugar through an N-glycosidic linkage and constitutes for a nucleoside. In other words, a Nucleoside is made of a Sugar and a Nitrogenous base. Examples for nucleosides: Adenosine or deoxyadenosine (adenine + ribose sugar), Guanosine or deoxyguanosine (guanine + ribose sugar), Cytidine or deoxycytidine (cytosine + ribose sugar) and Thymidine or deoxythymidine (thymine + ribose sugar). Therefore, a nucleotide is made of a Nucleoside and a $PO_4$ group.
| Note box: Nucleic acids with polysaccharides and polypeptides comprise the true macromolecular fraction of any living tissue or cell. |
Questions from section 9.6:
- Write a note on nucleic acids, explaining its structure and composition.
9.7 Structure of Proteins
- Proteins, as mentioned earlier, are heteropolymers containing strings of amino acids.
- A protein is imagined as a line, the left end represented by the first amino acid and the right end represented by the last amino acid. The first amino acid is also called as N-terminal amino acid. The last amino acid is called the C-terminal amino acid.
- A protein thread does not exist throughout as an extended rigid rod. The thread is folded at certain regions to form of a helix (similar to a revolving staircase) or other structures.
| Note box: Only right handed helices are observed in them. |
Types of Structures formed by proteins:
| Concept box: Amino-acid Residue: When two or more amino acids combine to form a peptide, the elements of water are removed, and what remains of each amino acid is called an amino-acid residue. |
Primary Structure of a protein: The primary structure of a protein refers to the sequence of amino acids arranged in the polypeptide chain in the order: first amino acid, second amino acid, and so on (refer figure below).

Figure 9.11 Primary structure of a portion of a hypothetical protein. N and C refer to the two termini of every protein. Single letter codes and three letter abbreviations for amino acids are also indicated.
Secondary Structure of protein: The protein structure that involves folding of the peptide chain which can be in the forms of: an alpha helix, a beta sheet, or a random coil (refer Figure 9.12 a below).

Tertiary Structure of protein: The long protein chain folded upon itself like a hollow woolen ball, gives rise to the tertiary structure (refer Figure 9.12 b above). This gives us a 3-dimensional view of a protein. Tertiary structure is absolutely necessary for the many biological activities of proteins.
Quaternary Structure of protein: Some proteins are an assembly of more than one polypeptide. The manner in which these individual folded polypeptides or subunits are arranged with respect to each other, say as, linear string of spheres, spheres arranged one upon each other in the form of a cube or plate is the architecture of a protein also called the quaternary structure of a protein.
For example, adult human haemoglobin consists of 4 subunits. Two of these are identical to each other. Hence, two subunits of α type and two subunits of β type together constitute the human haemoglobin (Hb).

Questions from section 9.7:
- Name the four main types of structures of proteins and explain.
9.8 Nature of Bond Linking Monomers in a Polymer
a) Formation of peptide bond: As mentioned earlier, in a polypeptide or a protein, amino acids are linked by a peptide bond.
A peptide bond is formed when the carboxyl (-COOH) group of one amino acid reacts with the amino (-$NH_2$) group of the next amino acid with the elimination of a water moiety that is, dehydration.
b) Formation of glycosidic bond: As we know, a polysaccharide is formed by individual monosaccharides linked through glycosidic bonds.
The glycosidic bond is formed between two carbon atoms of adjacent monosaccharides by elimination of a water moiety (that is, dehydration).
c) Formation of phosphodiester bond: In a nucleic acid, a phosphate moiety links the 3 -carbon of one sugar of one nucleotide to the 5 -carbon of the sugar of the succeeding nucleotide. The bond between the phosphate and hydroxyl group of sugar is an ester bond. As there is one such ester bond on either side, it is called phosphodiester bond (Figure 9.14).

Watson and Crick model of DNA:
One of the secondary structures exhibited by DNA is the famous Watson-Crick model. According to the model,

- DNA exists as a double helix.
- The two strands of polynucleotides are antiparallel that is, run in the opposite direction.
- The backbone is formed by the sugar-phosphate-sugar chain.
- The nitrogen bases are projected almost perpendicular to this backbone but face inside.
- The nitrogen bases, A and G of one strand compulsorily pairs with T and C, respectively, on the other strand.
- Two hydrogen bonds are formed between A and T and three hydrogen bonds between G and C.
- Each strand appears like a helical staircase. Each step of ascent along the helix is represented by a pair of linked bases on opposite strands.
- At each step of ascent, the strand turns 36 .
- One full turn of the helical strand would involve ten steps or ten base pairs. The pitch of the helix is the height of one complete turn, measured parallel to the axis of the helix which is, 34 or 3.4nm.
- The rise or the distance between two consecutive base pairs on the same strand is 3.4 or 0.34nm.
This form of DNA described above is called the B-DNA.
Questions from section 9.8:
1. Explain the formation of the following bonds:
- Peptide bond
- Glycosidic bond
- Phosphodiester bond
2. Explain Watson and Crick model of DNA with a diagram.
9.9 Dynamic State of Body Constituents Concept of Metabolism
Metabolism: The biomolecules in living organisms constantly change and turn into some other biomolecules through chemical reactions by breaking and forming bonds. These chemical reactions are called metabolism. As we can expect, each of the metabolic reactions results in the transformation of biomolecules.
A few examples for such metabolic transformations are:
removal of $CO_2$ from amino acids making an amino acid into an amine, removal of amino group in a nucleotide base and hydrolysis of a glycosidic bond in a disaccharide.
Metabolic Pathways
Features of Metabolic pathways:
a) Inter-conversion: Majority of the metabolic reactions do not occur in isolation but are linked to some other reactions. Thus, metabolites (products of metabolism) are converted into each other through a series of linked reactions called metabolic pathways.
b) Patterns: These metabolic pathways are similar to the automobile traffic in a city. The pathways are either linear or circular. These pathways crisscross each other, like there are traffic junctions.
c) Dynamic state: Flow of metabolites through metabolic pathway has a definite rate and direction like automobile traffic. This metabolite flow is called, dynamic state of body constituents. In other words, the body constituents are considered to be in a dynamic state.
d) Smooth, without problems: It is necessary that this interlinked metabolic traffic is very smooth and without a single reported mishap for healthy conditions.
e) Catalytic nature: Another feature of these metabolic reactions is that every chemical reaction is a catalysed reaction (reactions that take place with the help of catalysts). There is no uncatalysed metabolic conversion in living systems. For instance, even $CO_2$ dissolving in water, a physical process, is a catalysed reaction in living systems. The catalysts which hasten the rate of a given metabolic conversion in organisms are proteins. These proteins with catalytic power are named enzymes.
Questions from section 9.9:
- What is metabolism? Give examples.
- Explain the features of metabolic pathways.
9.10 Metabolic Basis for Living
There are two metabolic pathways:
a) Catabolic pathway
b) Anabolic pathway
Characteristics of Catabolic pathway:
- Catabolic pathways involve the breakdown of nutrient molecules (like food) into usable forms (like energy).
- The energy liberated is either liberated instantly or stored in the form of chemical bonds.
- For example, when glucose is degraded to lactic acid in our skeletal muscle, energy is liberated. This metabolic pathway from glucose to lactic acid which occurs in 10 metabolic steps is called glycolysis.
- In case the energy is stored for later usage, it is stored as bond energy. Bond energy is utilised for biosynthetic, osmotic and mechanical work that we perform. The most important form of energy currency in living systems is the bond energy stored in a chemical called, adenosine triphosphate (ATP).
Characteristics of Anabolic pathway:
- Anabolic pathways involve building up of new molecules out of the products of catabolism.
- The new molecules built via anabolic pathways (macromolecules) are useful for building cell structures and maintaining the cell.
- In the process, energy is used up.
- For example, protein synthesis, DNA synthesis, growth of bones and muscles all consume immense energy and thus constitute for anabolic pathways.
Questions from section 9.10:
- State the characteristics of catabolic and anabolic pathways.
9.11 The Living State
Metabolism is a defining feature of the living state. How?
- Chemical compounds in a living organism that is, metabolites or biomolecules, are present at concentrations characteristic to each organism. For example, the blood concentration of glucose in a normal healthy individual is 4.5-5.0 mMol/ L, while that of hormones would be of the order: nanograms/ mL.
- Since concentrations of specific biomolecules are constant in biological systems (like, in tissues or organs), living organisms are said to be in a steady state.
- Further, these biomolecules are in a metabolic flux since any chemical or physical process moves spontaneously to equilibrium. This makes the steady state a non-equilibrium state.
- We know that systems at equilibrium cannot perform work. As living organisms work continuously, they cannot afford to reach equilibrium. Hence, the living state is a non-equilibrium steady-state to be able to perform work (voluntary physical work or involuntary processes like digestion and respiration).
- Thus, living involves a constant effort to prevent falling into equilibrium. This is achieved by energy input. Metabolism provides a mechanism for the production of energy. Hence the living state and metabolism are synonymous. Without metabolism there cannot be a living state.
Questions from section 9.11:
- Justify the statement: Metabolism is a defining feature of the living state .
9.12 Enzymes
| Concept box: Substrate: The substance on which an enzyme acts. |
Characteristics of enzymes:
- All enzymes are catalytic proteins.
- There are some nucleic acids that behave like enzymes as well. These are called ribozymes.
- One can depict an enzyme by a line diagram.
- An enzyme like any protein has a primary structure, that is, amino acid sequence of the protein. An enzyme like any protein has the secondary and the tertiary structures as well.
- Enzymes are characterized by presence of active sites A tertiary structure (refer Figure 9.12) will have a backbone of protein chain folded upon itself or criss-crosses itself. This folding up leads to formation of crevices or pockets. One such pocket is referred to as, the active site . An active site of an enzyme is a crevice or pocket into which the substrate fits. Thus enzymes, through their active sites, catalyse reactions at a high rate.
- Inorganic catalysts work efficiently at high temperatures and high pressures, while enzymes get damaged at high temperatures (say above 40 C). However, enzymes isolated from organisms that normally live under extremely high temperatures (for example, in hot vents and sulphur springs), are stable and retain their catalytic power even at high temperatures (upto 80 -90 C). Thermal stability thus becomes a valued quality of such enzymes isolated from thermophilic organisms.
9.12.1 Chemical Reactions
- We will now understand what physical processes and chemical reactions are; and how they differ.
- Chemical compounds undergo two types of changes A physical change which is accompanied by a change in shape without breaking of bonds (or) change in state of matter (example, during melting of ice into water, or during evaporation of water to vapour state). These two processes are called, physical processes.
- However, when bonds are broken and new bonds are formed during transformation, this will be called a chemical reaction. For example:
$ \ce { Ba(OH)_2 + H_2SO_4 -> BaSO_4 + 2H_2O}$ is an inorganic chemical reaction. Similarly, hydrolysis of starch into glucose is an organic chemical reaction.
Rate of Physical or Chemical process: It refers to the amount of product formed per unit time. It can be expressed as:
$$ rate= \frac {δ P}{δ t} $$
| Note box: Rate can also be called velocity if the direction is specified. |
Effect of Temperature on Rate:
- A general rule of thumb is that rate doubles or decreases by half for every 10 C change in either direction.
- Catalysed reactions proceed at vastly higher rates than that of uncatalysed ones. Similarly, even for enzyme catalysed reactions, the rate would be vastly higher than the rate of a reaction in which the catalytic enzyme is absent. For example,
$ \ce { CO_2 + H_2O <->[{Carbonic anhydrase}] H_2CO_3 }$ carbon dioxide water carbonic acid - In the absence of an enzyme, the above reaction is very slow, with about 200 molecules of $H_2CO_3$ being formed in an hour. However, in the presence of the enzyme, carbonic anhydrase within the cytoplasm, the reaction speeds up drastically with about 600,000 molecules being formed every second. The enzyme has accelerated the reaction rate by about 10 million times.
Metabolic pathway as a function of enzyme action:
- A multistep chemical reaction, where each of the steps is catalysed by the same enzyme complex or different enzymes, is called a metabolic pathway. For example,
$$ \ce { Glucose -> 2 Pyruvic acid}$$
$$ \ce { C_6H_{12} O_6 + O_2 -> 2C_3H_4O_3 + 2H_2O}$$
The above reaction is actually a metabolic pathway in which glucose becomes pyruvic acid through ten different enzyme catalysed metabolic reactions.
Result of metabolic pathways:
- Each metabolic pathway with one or two additional reactions gives rise to a variety of metabolic end products.
- For example, in our skeletal muscle, under anaerobic conditions, lactic acid is formed. Under normal aerobic conditions, pyruvic acid is formed. However, in yeast, the same pathway during fermentation under anaerobic conditions leads to the production of ethanol (alcohol).
Hence, under different conditions, different products are possible.
9.12.2 How do Enzymes bring about such High Rates of Chemical Conversions?
To understand this we should study enzymes a little more.
Enzyme action to Product formation Steps:
- Chemical or metabolic conversions are nothing but reactions. In enzymatic reactions, the reactant is the substrate. Hence, enzymes which are proteins with three dimensional structures having an active site, convert a substrate (S) into a product (P) by acting upon the substrate at these sites.
- Symbolically, this can be depicted as:
$$ S \Rightarrow P$$ - Thus, the substrate S has to bind to the enzyme at its active site within a given cleft or pocket. The substrate has to diffuse towards the active site . Therefore, an ES complex or enzyme-substrate complex is formed. This complex formation is a transient phenomenon (short-lived or fast-changing state). The new substrate formed immediately after the binding is called transition state structure.
- Very soon, after the expected bond breaking or making, is completed, the product is released from the active site. In other words, the structure of substrate gets transformed into the structure of product(s).
- Transition state structure is one of the pathways between the formations of stable substrate and the final product. Thus, it is understood that all other intermediate structural states are unstable.
Stability of molecules:
Stability is related to energy of the molecule or the structure. It can be graphically represented as in Figure 9.16:

The y-axis represents the potential energy content. The x-axis represents the progression of the structural transformations (or) through transition states.
Two things are observed:
a) The energy level difference between S and P, if P is at a lower level than S , the reaction is an exothermic reaction. There is no need of supplying energy (by heating) in order to form the product.
b) However, whether it is an exothermic or spontaneous reaction or an endothermic or energy requiring reaction, the substrate, S has to go through a much higher energy state or transition state. The difference in average energy content of S from that of the transition state is called activation energy (refer figure 9.16 above). Enzymes eventually bring down this energy barrier forming P from S more easily.
9.12.3 Nature of Enzyme Action
- Each enzyme (E) has a substrate binding site in its molecule where a highly reactive enzyme-substrate complex (ES) is produced. This E-S complex is short-lived and dissociates into its product(s), P. The formation of the ES complex is essential for catalysis.
- However, the unchanged enzyme (which has not reacted) forms an intermediate product called, the enzyme-product complex (EP).
The catalytic cycle of enzyme action can be described in the following steps:

- First, the substrate binds to the active site of the enzyme, fitting into the active site.
- The binding of the substrate induces the enzyme to alter its shape such that the enzyme fits more tightly around the substrate.
- The active site of the enzyme is now in close proximity of the substrate. Thus, the active site breaks the chemical bonds of the substrate and the new enzyme-product complex is formed.
- The enzyme releases the products of the reaction and the free enzyme is ready to bind to another molecule of the substrate. These steps are repeated again and again, giving rise to the catalytic cycle.
9.12.4 Factors Affecting Enzyme Activity
The activity of an enzyme can be affected by changes in the conditions such as, temperature, pH and change in substrate concentration or binding of specific chemicals that regulate its activity. Changes in these conditions alter the tertiary structure of the protein.
We shall now discuss these features in detail:
| Concept box: Denaturation of proteins refers to the disruption and possible destruction of both the secondary and tertiary structures. |
1. Effect of Temperature and pH:
- Temperature and pH of enzymes generally function in a narrow range of temperature and pH (as shown in Figure 9.17 below).
- Each enzyme shows its highest activity at a particular temperature and pH called, the optimum temperature and optimum pH. Activity declines both below and above the optimum value.
- Low temperature preserves the enzyme in a temporarily inactive state whereas high temperature destroys enzymatic activity because proteins are denatured by heat.

2. Concentration of Substrate
- With the increase in substrate concentration, the velocity of the enzymatic reaction rises at first. The reaction ultimately reaches a maximum velocity (Vmax). After maximum velocity is reached, there is no further rise in concentration of the substrate (refer figure 9.17 above). This is because, the enzyme molecules are fewer than the substrate molecules and after saturation of these molecules, there are no free enzyme molecules to bind with the additional substrate molecules.
3. Presence of Inhibitors
- The activity of an enzyme is also affected by the presence of specific chemicals which bind to the enzyme and shuts off enzyme activity. The process is called inhibition and the chemical is called an inhibitor.
- When the inhibitor closely resembles the substrate in its molecular structure and inhibits the activity of the enzyme, it is known as competitive inhibitor. Due to its close structural similarity with the substrate, the inhibitor competes with the substrate for the substrate-binding site of the enzyme. Consequently, the substrate cannot bind and as a result, the enzyme action declines. For example, inhibition of succinic dehydrogenase by malonate which closely resembles the substrate, succinate in structure.
- The property of competitive inhibitors are often used in the control of bacterial pathogens.
9.12.5 Classification and Nomenclature of Enzymes
- Enzymes have been classified into different groups based on the type of reactions they catalyse.
- Enzymes are divided into 6 classes each with 4-13 subclasses and named accordingly by a four-digit number.
The 6 Classes of Enzymes:
- Oxidoreductases and dehydrogenases: Enzymes which catalyse oxidoreduction between two substrates S and S ; for example,
$$ \ce { S reduced + S oxidised -> S oxidised + S reduced }$$ - Transferases: Enzymes catalysing transfer of a group, G (other than hydrogen) between a pair of substrate S and S , for example,
$$ \ce {S – G + S -> S + S – G }$$ - Hydrolases: Enzymes catalysing hydrolysis of ester, ether, peptide, glycosidic, C-C, C-halide or P-N bonds.
- Lyases: Enzymes that catalyse removal of groups from substrates. This can occur by mechanisms other than hydrolysis. They often give double-bond molecules.
- Isomerases: Includes all enzymes catalysing inter-conversion of optical, geometric or positional isomers.
- Ligases: Enzymes catalysing the linking together of 2 compounds, like, enzymes which catalyse joining of C-O, C-S, C-N, P-O etc. bonds.
9.12.6 Co-factors
Enzymes are made of one or several polypeptide chains. However, sometimes, a non-protein constituent called a cofactor is bound to the enzyme to make the enzyme catalytically active. In these instances, the protein portion of the enzymes is called the apoenzyme.
| Concept box: Heme: A prosthetic group consisting of a protoporphyrin ring and a central iron (Fe) atom. A protoporphyrin ring is made up of four pyrole rings linked by methene bridges. |
Three kinds of cofactors are identified:
- prosthetic groups,
- co-enzymes and
- metal ions.
Prosthetic groups: Prosthetic groups are organic compounds that differ from other cofactors in that they are tightly bound to the apoenzyme. For example, in peroxidase and catalase, which catalyze the breakdown of hydrogen peroxide to water and oxygen, heme is the prosthetic group and it is a part of the active site of the enzyme.
Co-enzymes: Co-enzymes are also organic compounds but their association with the apoenzyme is what distinguishes them. Co-enzymes usually occur during the course of catalysis. Furthermore, co-enzymes serve as co-factors in a number of different enzyme catalyzed reactions. The essential chemical components of many coenzymes are vitamins, like, coenzyme nicotinamide adenine dinucleotide (NAD) and NADP contain the vitamin niacin.
Metal ions: A number of enzymes require metal ions for their activity which form coordination bonds with side chains at the active site and at the same time form one or more cordination bonds with the substrate. For example, zinc is a cofactor for the proteolytic enzyme carboxypeptidase.
Importance of cofactors: Catalytic activity is lost when the cofactor is removed from the enzyme which testifies that they play a crucial role in the catalytic activity of the enzyme.
Questions from section 9.12:
1. State the characteristics of enzymes.
2. What is a physical process?
3. What is a chemical reaction?
4. What do we mean by rate of a physical process or of a chemical reaction?
5. Explain the effect of temperature on rate of a reaction with an example.
6. Explain stepwise, enzyme action.
7. Write a note on stability of molecules during enzyme-substrate reaction (with graph).
8. Explain catalytic cycle of enzyme of action.
9. State the factors affecting enzyme activity.
10. Name and explain the 6 classes of enzymes.
11. What is a cofactor and an apoenzyme?
12. Explain the 3 types of cofactors.
13. State the importance of cofactors?



