Hello

Chapter 5 – Laws of Motion – 11th Physics

41โ€“62 minutes

5.0 Preview:

  • In this chapter you will learn about the three popular laws of motion (By Newton) as the title indicates; which will revolve around how different forces come into play when a body is at rest and in motion. You will see how Aristotle came up with ideas regarding motion, which was later modified by Galileo. A trail of ideas by these great scientists lead to a profound understanding of how forces actually arise, contrary to the popular notion, that a force is necessary to keep a body in uniform motion (known as Aristotleโ€™s fallacy).
  • Next, you will learn about one of the most important and interesting aspects in the study of motion, Inertia. Inertia is the tendency of a body to remain in its state of rest or uniform motion, unless compelled by an external force.
  • Newton studied this aspect and put forth, the first law as, โ€œEvery body continues to be in its state of rest or of uniform motion in a straight line unless compelled by some external force to act otherwise.โ€
  • Then, Newton’s second law of motion, which states that โ€œthe acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.โ€
  • You will then learn about impulse and impulsive force. A large magnitude of force acting for a very short duration producing a finite change in momentum of the body is called impulse.
  • Then about momentum as the product of the mass, โ€œmโ€ and velocity, โ€œvโ€, and is denoted by p for any object. For now you may understand Momentum as an aspect that would do with the impact of forces on objects.
  • This would lead to the third law of motion, โ€œTo every action, there is an equal and opposite reaction.
  • You will understand how a body at rest overcomes the resisting force of friction (or static friction) before it begins to move; then about how kinetic friction comes into play as the body is set in motion; viscous force as the resisting force in fluids and air resistance in air!
  • Next, rolling friction, as a resisting force for a rolling body will be dealt with. This is a lot like static friction since it considers every point of contact with the floor as a small flat body comin in contact with the surface of another flat body at any instant.
  • You will then learn how to arrive at Centripetal force (for a body in circular motion) from the second law of motion.
  • Further, about how a free body diagram could help us analyse the external forces acting on a body and its application in finding the missing forces. A separate diagram which shows a particular component of a system, with all the forces on the system by the remaining part of the complete system and that, which also includes forces on the component by other external agencies constitutes for โ€˜a free-body diagramโ€™.
  • The last topic is about what constitutes for an action-reaction pair. You will find that an action-reaction pair only arises when there is an action that triggers a reaction.

5.1 Introduction

In the preceding Chapter, our concern was to describe the motion of a particle in space quantitatively. In this chapter, we will learn about what causes the motion of bodies.

Consider these scenarios: To move a football at rest, someone must kick it. To throw a stone upwards, one has to give it an upward push. A breeze causes the branches of a tree to swing. A boat moves in a flowing river without anyone rowing it. Clearly, some external agency is needed to provide force to move a body from rest. Likewise, an external force is needed also to retard or stop motion. You can stop a ball rolling down an inclined plane by applying a force against the direction of its motion. In these examples, the external agency of force (hands, wind and stream of water) is in contact with the object.

A stone released from the top of a building accelerates downward due to the gravitational pull of the earth. A bar magnet can attract an iron nail from a distance. This shows that external agencies (like gravitational and magnetic forces) can exert force on a body even from a distance.

Hence, a force is required to put a stationary body in motion or stop a moving body and some external agency is needed to provide this force. The external agency may or may not be in contact with the body.

Consider a body is moving uniformly, say, a skater moving on a straight track with constant speed on a horizontal ice slab. An external force is required to keep him in uniform motion. You will learn about this force in the sections that follow.

5.2 Aristotleโ€™s Fallacy

  • The Greek thinker, Aristotle stated that if a body is moving, some external force is required to keep it moving. According to this view, an arrow shot from a bow keeps flying since the air behind the arrow keeps pushing it. A child playing with a toy car with a string attached to it, needs to pull it to keep the car moving. Thus, according to the law, all bodies eventually come to rest if they are not subjected to any physical force like push by the air or a pull by hands of a child in the above cases.
  • But this ignores the existence of opposing forces such as friction (in solids) and viscous forces (in fluids). Thus, the law falls short at explaining how the body actually comes to rest; that is, the fact that in order for a body to keep moving, not only an external force is required but a system of forces come into playโ€”an opposing force that is necessary to cancel out the frictional force (in case of motion on solid surfaces) to keep the body in motion is ignored by the law.
  • In brief, Aristotleโ€™s view that a force is necessary to keep a body in uniform motion is wrong. A force is necessary in practice to counter the opposing force of friction.
  • Thus, Galileoโ€™s laws of Inertia were put forth to account for these opposing forces.

5.3 The Law of Inertia

Galileo studied motion of objects on an inclined plane. He observed that;

Example box:

  • Objects moving down an inclined plane accelerate, while those moving up, retard as shown in the figure below.
  • Motion on a frictionless-horizontal-plane is an intermediate situation where the object must neither have acceleration nor retardation, that is, it should move with constant velocity as shown in figures, 5.1(a)-(i),(ii)&(iii) below:
Figure 5.1
  • Another experiment by Galileo leading to the same conclusion involves a double inclined plane. A ball released from rest on one of the planes rolls down and climbs up the other as shown in first figure of 5.1(b) below. If the planes are smooth, the final height of the ball is nearly the same as the initial height (a little less but never greater because friction retards the maximum height the ball can reach). In the ideal situation, when friction is absent, the final height of the ball is the same as its initial height.
  • If the slope of the second plane is decreased and the experiment repeated, the ball will still reach the same height, but, it will travel a longer distance as shown in second figure of figure 5.1(b) below.
  • In the limiting case, that is, when the slope of the second plane is zero (is completely horizontal), the ball travels an infinite distance as shown in third figure of 5.1(b). In other words, its motion never ceases. This is, of course, an ideal situation. In practice, the ball does come to a stop after moving a finite distance on the horizontal plane, because of the opposing force of friction which can never be totally eliminated. However, if there were no friction, the ball would continue to move with a constant velocity on the horizontal plane.
Figure 5.1 b
  • Galileo thus concluded that the state of rest and the state of an object moving with uniform velocity are equivalent, since there are no net forces acting on the body. In other words, if the net external force is zero,
    (a) A body at rest continues to remain at rest and (b) A body in motion continues to move with a uniform velocity. This property of the body is called inertia. Inertia means โ€œresistance to changeโ€. Inertia is thus, the tendency of a body to remain in its state of rest or uniform motion unless compelled by an external force.

Questions for section 5.2 and 5.3:

  1. Explain with an example, Aristotleโ€™s fallacy.
  2. What is inertia? Explain briefly, its effect associated with a moving body and for a body at rest.

5.4 Newtonโ€™s First Law of Motion

  • Newton built on Galileoโ€™s ideas and laid the foundation of mechanics in terms of three laws of motion that go by his name. Galileoโ€™s law of inertia was his starting point which he formulated and thus, it came to be known as the Newtonโ€™s first law of motion, which states that:
    โ€œEvery body continues to be in its state of rest or of uniform motion in a straight line unless compelled by some external force to act otherwise.โ€
  • The state of rest or uniform linear motion both imply zero acceleration. The first law of motion can, therefore, be simply expressed as: If the net external force on a body is zero, its acceleration is zero. Acceleration can be non-zero only if there is a net external force on the body.
Example box:
For example, a spaceship out in interstellar space, far from all other objects and with all its rockets turned off, has no net external force acting on it. Its acceleration, according to the first law, must be zero. If it is in motion, it must continue to move with a uniform velocity and never stop.
Similarly, by the law, when a book is at rest, the net external forces on it are zero. The net upward-normal-force exerted by the table, โ€œRโ€ is balanced by the force due to gravity, that is, its weight, โ€œWโ€ which is exerted downwards. We can express this as: R=W (which implies that normal force must be equal and opposite to the weight of the book).

Now, you may understand better how inertial force works. Consider the following,

  • Suppose we are standing in a stationary bus and the driver starts the bus suddenly, we get thrown backward with a jerk. This happens because our feet are in touch with the floor. If there were no friction (in the form of a resisting-gripping-force), we would remain where we were, while the floor of the bus would simply slip forward under our feet and the back of the bus would hit us. However, fortunately, there is some friction between the feet and the floor. If the start is not too sudden, i.e. if the acceleration is moderate, the frictional force would be enough to accelerate our feet along with the bus.
  • But our body is not strictly a rigid body. It is deformable, that is, it allows some relative displacement between different parts. What this means is that while our feet go with the bus, the rest of the body remains where it is due to inertia. Relative to the bus, therefore, we are thrown backward. As soon as that happens, however, the muscular forces on the rest of the body (by the feet) come into play to move the body along with the bus.
  • A similar thing happens when the bus suddenly stops. Our feet stop due to the friction which does not allow relative motion between the feet and the floor of the bus. But the rest of the body continues to move forward due to inertia. Hence, we are thrown forward. The restoring muscular forces again come into play and bring the body back to rest.

Example 5.1: An astronaut accidentally gets separated out of his small accelerating in inter stellar space at a constant rate of 100 m $s^{-2}$. What is the acceleration of the astronaut the instant after he is outside the spaceship? (Assume that there are no nearby stars to exert gravitational force on him.)

Answer: Since there are no nearby stars to exert gravitational force on him and the small spaceship exerts negligible gravitational attraction on him, the net force acting on the astronaut, once he is out of the spaceship, is zero. By the first law of motion the acceleration of the astronaut is zero.

Questions for section 5.4:

  1. State Newtonโ€™s first law of motion. Explain briefly, with an example.

5.5 Newtonโ€™s Second Law of Motion

While the first law refers to the simple case when the net external force on a body is zero, the second law of motion deals with what happens when there is net external force acting on the body. It relates the net external force to the acceleration of the body. (We will define the law at the end of the section once you have a clear knowledge about concepts relating to the law.)

Momentum

Definition box:
Momentum of a body is defined to be the product of its mass, m and velocity, v, and is denoted by p.

Thus, p = m v (5.1)

Momentum is clearly a vector quantity (since it is the product of a scalar and a vector). The following common experiences indicate the importance of this quantity:

  • Suppose that a light-weight vehicle (say a small car) and a heavy weight vehicle (say a loaded truck) are parked on a horizontal road. We all know that a much greater force is needed to push the truck than the car to bring them to the same speed in same time. Similarly, a greater opposing force is needed to stop a heavier body than the force that would be needed to stop a lighter body in the same time, when they are moving with the same speed.
  • If two stones, one light and the other heavy, are dropped from the top of a building, a person on the ground will find it easier to catch the light stone than the heavy stone. The mass of a body is thus an important parameter that determines the effect of force on its motion.
  • Speed is another important parameter to consider. A bullet fired by a gun can easily pierce human tissue before it stops, resulting in casualty. The same bullet fired with moderate speed will not cause much damage. Thus for a given mass, the greater the speed, the greater is the opposing force needed to stop the body in a certain time. Taken together, the product of mass and velocity, that is momentum, is evidently a relevant variable of motion (or speed). The greater the change in the momentum in a given time, the greater is the force that needs to be applied to cause a change.
  • A seasoned cricketer catches a cricket ball coming in with great speed far more easily than a novice, who can hurt his hands in the act. One reason is that the cricketer allows a longer time for his hands to stop the ball. As you may have noticed, he draws in the hands backward in the act of catching the ball (Fig.5.3). The novice, on the other hand, keeps his hands fixed and tries to catch the ball almost instantly. He needs to provide a much greater force to stop the ball instantly, and this hurts. The conclusion is clear: force not only depends on the change in momentum, but also on how fast the change is brought about. The same change in momentum brought about in a shorter time needs a greater applied force (stopping force). In short, the greater the rate of change of momentum, the greater is the force.

Figure 5.3 Force not only depends on the change in momentum but also on how fast the change is brought about. A seasoned cricketer draws in his hands during a catch, allowing greater time for the ball to stop and hence requires a smaller force

  • Observations confirm that the product of mass and velocity (that is, momentum) is to do with effect of force on motion. Suppose, a fixed force is applied for a certain interval of time on two bodies of different masses, initially at rest, the lighter body picks up a greater speed than the heavier body. However, at the end of the time interval, observations show that each body acquires the same momentum. Thus, the same force applied to two bodies for the same time causes the same change in momentum even if they have different masses. This is a crucial to the second law of motion.
  • Although you might think, momentum and change in momentum both have the same direction (or sign), this is not always the case. Suppose a stone is rotated with uniform speed in a horizontal plane by means of a string, the magnitude of momentum is fixed, but its direction changes continuously as shown in Fig. 5.4. A force is needed to cause this change in momentum vector.
    This force is provided by our hand through the string. Our hand needs to exert a greater force if the stone is to be rotated at greater speed or in a circle of smaller radius, or both. This corresponds to greater acceleration or equivalently a greater rate of change in momentum vector. This suggests that the greater the rate of change in momentum vector the greater is the force applied.

Figure 5.4 Force is necessary for changing the direction of momentum, even if its magnitude is constant. We can feel this while rotating a stone in a horizontal circle with uniform speed by means of a string.

These qualitative observations lead to the second law of motion expressed by Newton as follows:

  • The rate of change of momentum of a body is directly proportional to the applied force and takes place in the direction in which the force acts. Thus, if under the action of a force F for time interval ฮ”t, the velocity of a body of mass, โ€œmโ€ changes from โ€œvโ€ to โ€œv + ฮ”vโ€. So, its initial momentum p=m.v changes to p= m.(v + ฮ”v).

Thus, according to the Second Law,

$$ F โˆ \frac {ฮ”p}{ฮ”t} \space or \space
\frac {ฮ”p}{ฮ”t} $$

Where, โ€œkโ€ is a constant of proportionality. Taking the limit ฮ”t โ†’ 0, the term $ \frac{ฮ”p}{ ฮ”t} becomes the derivative or differential co-efficient of p with respect to t, denoted by: $ \frac{dp}{dt}.

$$ F = k \frac{ฮ”p}{ฮ”t } โ€ฆ. 5.2$$
For a body of fixed mass m,

$$ \frac {dp}{dt} = \frac {d}{dt} \big( mv \big) = m \frac {dv}{dt} = ma โ€ฆ5.3 $$
i.e the Second Law can also be written as
F = k m aโ€ฆ5.4
which shows that force is proportional to the product of mass m and acceleration a.The unit of force has not been defined so far. In fact, we use Eq. (5.4) to define the unit of force.We, therefore, have the liberty to choose any constant value for k. For simplicity, we choose
k = 1. The Second Law then is
$$ F = \frac{dp}{dt} = ma โ€ฆ5.5$$
In SI unit force is one that causes an acceleration of 1 m s-2 to a mass of 1 kg. This unit is known as newton: 1 N = 1 kg m s-2.
Let us note at this stage some important points
about the second law:

In the second law, F = 0 implies a = 0. The second Law is obviously consistent with the
first law.

The second law of motion is a vector law. It is equivalent to three equations, one for each
component of the vectors:
$$ F_x = \frac{dp_x}{dt} = ma_x $$
$$ F_y = \frac{dp_y}{dt} = ma_y $$
$$ F_z = \frac{dp_z}{dt} = ma_z โ€ฆ.5.6$$

  • This means that if a force is not parallel to the velocity of the body, but makes some angle with velocity, it changes only the component of velocity along the direction of force. The component of velocity normal to the force remains unchanged. For example, in the motion of a projectile under the vertical gravitational force, the horizontal component of velocity remains unchanged Refer (Fig. 5.5).
  • The second law of motion given by Eq. (5.5) is applicable to a single point particle. The force, โ€œFโ€ in the law stands for the net external force on the particle and โ€œaโ€ stands for acceleration of the particle. For a rigid body (or, to a system of particles), โ€œFโ€ refers to the total external force on the system and โ€œaโ€ refers to the acceleration of the system as a whole. (Any internal forces in the system are not to be included in โ€œFโ€).
  • The second law of motion depends on the location of the object or point wholly, which means that force โ€œFโ€ at a point in space at a certain instant of time is related to acceleration, โ€œaโ€ at that point and at that instant (and does not depend on any time instant that has passed) as shown in figure 5.5.

Now that you know the aspects on which acceleration of a body depends, let us try to define the second law, as below:

Definition box:
Newton’s second law of motion states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

You could try to write the above statement as an algebraic expression to remember better!

Example 5.2: A bullet of mass 0.04 kg moving with a speed of 90 m $s^{-1}$ enters a heavy wooden block and is stopped after a distance of 60 cm. What is the average resistive force exerted by the block on the bullet?

Answer: The retardation โ€˜aโ€™ of the bullet (assumed constant) is given by

$$ a = -\frac {u^2}{2s}= \frac {-90ร—90}{2ร—0.6} ms^{-2} = – 6750 ms^{-2} $$

The retarding force, by the Second Law of motion, is = 0.04 kg ร— 6750 m $s^{-2}$ = 270 N

The actual resistive force, and therefore, retardation of the bullet may not be uniform. The
answer therefore, only indicates the average resistive force.

Example 5.3: The motion of a particle of mass m is described by $$ y =ut + \frac{1}{2} at^2 $$ . Find the force acting on the particle.

Answer: We know,

$$ y =ut + \frac{1}{2} at^2 $$

Now ,
$$ v = \frac {dy}{dt} = u+gt $$

acceleration, $ a = \frac {dv}{dt} = g $

Then the force is given by Eq. (5.5)

F = ma = mg

Thus the given equation describes the motion of a particle under acceleration due to

gravity and y is the position coordinate in the direction of g.

Impulse

  • A large magnitude of force acting for a very short duration producing a finite change in momentum of the body is called impulse.
  • For example, when a ball hits a wall and bounces back, the force on the ball by the wall acts for a very short time when the two are in contact, yet the force is large enough to reverse the direction of momentum of the ball. Often, in these situations, the force and the time duration are difficult to deduce separately as they are too small. However, we can find the product of force and time, which is the change in momentum. This product is called impulse;

Impulse = Force x Time Duration
= Change in momentum โ€ฆ5.7

Note box:
Large force acting for a short time to produce a finite change in momentum is called an impulsive force.

Example 5.4: A batsman hits back a ball straight in the direction of the bowler without changing its initial speed of 12 m $s^{โ€“1}$.If the mass of the ball is 0.15 kg, determine the impulse imparted to the ball. (Assume linear motion of the ball).

Answer: Change in momentum
= 0.15 ร— 12โ€“(โ€“0.15ร—12)= 3.6 N s,
Impulse = 3.6 N s,
in the direction from the batsman to the bowler.
This is an example where the force on the ball by the batsman and the time of contact of the ball and the bat are difficult to know, but the impulse is readily calculated.

Questions for section 5.5:

  1. Define momentum. Give the necessary relation pertaining to it.
  2. State and explain Newtonโ€™s Second law of motion.
  3. What is impulse? Give the necessary relation that defines it.

5.6 Newtonโ€™s Third Law of Motion

To understand Newtonโ€™s third law, consider the following scenarios:

  • When you press a coiled spring, the spring is compressed by the force of your hand. We know that, a compressed spring in turn exerts a force on your hand and you can feel it.
  • A stone falls and remains on the surface of the earth due to the force of gravity. The stone also exerts an equal and opposite force on the earth although we do not notice it (since the earth is very massive and the effect of a small force on its motion is negligible).
  • Thus, according to Newtonian mechanics,
    • Force never occurs singly in nature.
    • Force is the mutual interaction between two bodies.
    • Forces always occur in pairs.
    • Forces are always equal in magnitude and opposite in direction.

These ideas were compiled by Newton and stated by him as the third law of motion, as below;

Definition box:
Newtonโ€™s third law states that: โ€œTo every action, there is an equal and opposite reactionโ€.

The true meaning of terms you need to understand with regard to Newtonโ€™s third law:

  • The words, โ€œactionโ€ and โ€œreactionโ€ used in stating his law refer to forces. Thus, the third law means: Forces always occur in pairs. Force on a body A by B is equal and opposite to the force on the body B by A.
  • The terms action and reaction in the third law may give a wrong impression that action comes before reaction, that is, action is the cause and reaction, the effect. But, there is no cause-effect-relation implied by the third law. In other words, the force on A by B and the force on B by A act simultaneously. Hence, you may call any one of them action and the other reaction.
  • Action and reaction forces act on different bodies, not on the same body. Consider a pair of bodies A and B. According to the third law,

$$ F_{AB} = โ€“ F_{BA} โ€ฆ 5.8 $$

That is, (force on A by B) = – (force on B by A)

  • Thus, if we are considering the motion of any one body (A or B), only one of the two forces is relevant. It is an error to add up the two forces and claim that the net force is zero. However, if you are considering the system of two bodies as a whole (or as one), FAB and FBA are internal forces of the system. They add up to give a null force. Internal forces in a body or a system of particles thus cancel away in pairs.

Example 5.5: Two identical billiard balls strike a rigid wall with the same speed but at different angles, and get reflected without any change in speed, as shown in Fig. 5.6. What is (i) the direction of the force on the wall due to each ball? (ii) the ratio of the magnitudes of impulses imparted to the balls by the wall?

Answer: An instinctive answer to (i) might be that the force on the wall in case (a) is normal to the wall, while that in case (b) is inclined at 30ยฐ to the normal. This answer is wrong. The force on the wall is normal to the wall in both cases. How to find the force on the wall? The trick is to consider the force (or impulse) on the ball due to the wall using the second law, and then use the third law to answer (i). Let u be the speed of each ball before and after collision with the wall, and m the mass of each ball. Choose the x and y axes as shown in the figure, and consider the change in momentum of the ball in each case :

Case (a)

$ \big( p_x \big){initial} = mu $ and $\big( p_y \big){initial} = 0 $

$ \big( p_x \big){final} = mu $ and $\big( p_y \big){final} = 0 $

Impulse is the change in momentum vector.

Therefore,

x-component of impulse = โ€“ 2 m u

y-component of impulse = 0

Impulse and force are in the same direction. Clearly, from above, the force on the ball due to the wall is normal to the wall, along the negative x-direction. Using Newtonโ€™s third law of motion, the force on the wall due to the ball is normal to the wall along the positive x-direction. The magnitude of force cannot be ascertained since the small time taken for the collision has not been specified in the problem.

Case (b)

$ \big( p_x \big){initial} = m \space u \space cos30^o $ and $\big( p_y \big){initial} = – m \space u \space sin30^o $

$ \big( p_x \big){final} = – m \space u \space cos30^o $ and $\big( p_y \big){final} = – m \space u \space sin30^o $

Note, while $p_x$changes sign after collision, $p_y$ does not. Therefore,

x-component of impulse = โ€“2 m u cos 30ยฐ

y-component of impulse = 0

The direction of impulse (and force) is the same as in (a) and is normal to the wall along the negative x direction. As before, using Newtonโ€™s third law, the force on the wall due to the ball is normal to the wall along the positive x direction. The ratio of the magnitudes of the impulses imparted to the balls in (a) and (b) is $ \frac {2m \space u}{\big( 2 m \space u \space cos 30^o \big)} = \frac {2}{\sqrt3} โ‰ˆ 1.2 $

Questions for section 5.6:

  1. State Newtonโ€™s third law. Explain a real time scenario where you would see it.

5.7 Conservation of Momentum

  • The law of conservation of momentum is a consequence of the second and third laws of motion.
  • For example, when a bullet is fired from a gun, if the force exerted by the bullet on the gun is F, the force exerted by the gun on the bullet is F, according to the third law. The two forces act for a common interval of time ฮ”t.
  • According to the second law, F.ฮ”t is the change in momentum of the bullet and โ€“F.ฮ”t is the change in momentum of the gun. Since initially, both are at rest, the change in momentum equals the final momentum for both. Thus if $p_b$ is the momentum of the bullet after firing and $p_g$ is the recoil momentum of the gun,
    $$ p_g =-p_b $$
    (or) $$ p_b + p_g = 0. $$
  • That is, the total momentum of the (bullet + gun) system is conserved. Thus, in an isolated system (i.e. a system with no external force acting on it), mutual forces between pairs of particles in the system will also cause momentum change in individual particles of the system. The mutual forces for each pair of particles are equal and opposite. Hence, the momentum changes cancel in pairs and the total momentum remains unchanged. This fact is known as the law of conservation of momentum.
    Now that you know how momentum is conserved in a system of particles, let us try to define the law.
Definition box:
Law of conservation of momentum states: the total momentum of an isolated system of interacting particles is conserved.

An important example of the application of the law of conservation of momentum is the collision of two bodies. Consider two bodies A and B, with initial momenta $p_A$ and $p_B$. The bodies collide and get apart, with final momenta $pโ€ฒ_A$ and $pโ€ฒ_B$ respectively. By the Second Law,

$F_{AB} \Delta t = pโ€™A =p_A $ And $F{BA} \Delta t = pโ€™B โ€“ p_B $ (Where we have taken a common interval of time for both forces i.e. the time for which the two bodies are in contact.) Since $F{AB} = โˆ’F_{BA}$ by the third law,

$pโ€™_A โ€“ p_A = -(pโ€™_B -p_B)$

i.e $pโ€™_A + pโ€™B = p_A +p_Bโ€ฆ5.9$

This shows that the total final momentum of the isolated system equals its initial momentum. Notice that this is true whether the collision is elastic or inelastic.

Question for section 5.7:

  1. State and explain law of conservation of momentum with the example of how momentum is conserved when two bodies collide (With necessary equations).

5.8 Equilibrium of a particle

  • Equilibrium of a particle in mechanics refers to the situation where the net external forces on a particle are zero. According to the first law, this means that, the particle is either at rest or in uniform motion.
  • If two forces $F_1$ and $F_2$, act on the particle, for equilibrium to be achieved,
    $$ F_1 = โˆ’ F_2 โ€ฆ5.10$$
    That is, the two forces on the particle must be equal and opposite.
  • Similarly, equilibrium under three concurrent forces $F_1$, $F_2$ and $F_3$ requires that the vector sum of the three forces is zero, as expressed below: $$ F_1 + F_2 + F_3 = 0 โ€ฆ.5.11$$
  • Refer figure, 5.7 to understand how forces in a system cancel out each other. As depicted by the figure, the resultant of any two forces say $F_1$ and $F_2$ , obtained by the parallelogram law of forces must be equal and opposite to the third force, $F_3$. (Although you might think, the resultant should be the diagonal of the completed parallelogram, notice that this is the opposing force, hence it is directed away from the point of intersection of the two forces, $F_1$ and $F_2$).
  • Again, as shown in Fig. 5.7, the three forces in equilibrium can also be represented by the sides of a triangle with arrows (as we did for the parallelogram).
  • The result can be generalised to any number of forces. A particle is in equilibrium under the action of forces $F_1$, $F_2$,โ€ฆ$F_n$ if they can be represented by the sides of a closed n-sided polygon with arrows pointing in the same direction as the given vectors are.

Equation (5.11) implies that:In other words, the resultant of any two forces say F1 and F2, obtained by the parallelogram law of forces must be equal and opposite to the third force, F3. As seen in Fig. 5.7, the three forces in equilibrium can be represented by the sides of a triangle with the vector arrows taken in the same sense. The result can be generalised to any number of forces. A particleis in equilibrium under the action of forces F1, F2,โ€ฆ Fn if they can be represented by the sides of a closed n-sided polygon with arrows directed in the same sense.

Equation (5.11) implies that

$$ F_{1x} + F_{2x} + F_{3x} = 0 $$
$$F_{1y} + F_{2y} + F_{3y} = 0 $$
$$ F_{1z} + F_{2z} + F_{3z} = 0 โ€ฆ5.12 $$

Where, $F_{1x}$, $F_{1y}$ and $F_{1z} $ are the components of $F_1$ along x, y and z directions respectively.

Example 5.6 See Fig. 5.8 A mass of 6 kg is suspended by a rope of length 2 m from the ceiling. A force of 50 N in the horizontal direction is applied at the midpoint P of the rope, as shown. What is the angle the rope makes with the vertical in equilibrium? (Take g = 10 m s$^{-2}$). Neglect the mass of the rope.

Answer: Figures 5.8(b) and 5.8(c) are known as free-body diagrams. Figure 5.8(b) is the free-body diagram of W and Fig. 5.8(c) is the free-body diagram of point P.
Consider the equilibrium of the weight W.

Clearly,$T_2$ = 6 ร— 10 = 60 N.

Consider the equilibrium of the point P under the action of three forces – the tensions $T_1$ and $T_2$, and the horizontal force 50 N. The horizontal and vertical components of the resultant force must vanish separately:

$$ T_1 cos ฮธ = T_2 = 60 N $$

$$ T_1 sin ฮธ = 50 N $$

which gives that $ tan ฮธ = \frac {5}{6}\space or \space ฮธ =tan^-1 \big( \frac {5}{6} \big) = 40^o $

Note the answer does not depend on the length of the rope (assumed massless) nor on the point at which the horizontal force is applied.

Questions for section 5.8:

  1. When do you say that a particle is in equilibrium?

5.9 Common Forces in Mechanics

Concept box:
The resisting force that arises when one surface or object moves over another is called Friction.
  • Except, the gravitational force, which acts at a distance without the need of any intervening medium, all the other forces common in mechanics are contact forces. As the name suggests, a contact force on an object arises due to contact with some other object: solid or fluid.
  • When bodies are in contact (e.g. a book resting on a table, a system of rigid bodies connected by rods, hinges and other types of supports), there are mutual forces that arise (for each pair of bodies), by the third law. The component of contact force normal to the surfaces in contact is called normal reaction.
  • The component parallel to the common surface of two bodies in contact is called friction.
  • Contact forces arise when solids are in contact with fluids. For example, for a solid immersed in a fluid, there is an upward buoyant force equal to the weight of the fluid displaced.
  • The viscous force and air resistance are also examples of contact forces as shown in Fig. 5.9.
  • Two other common forces are tension in a string and the force due to spring. When a spring is compressed or extended by an external force, a restoring force (a force that tries to restore the spring to its initial position) is generated. This force is usually proportional to the compression or elongation (for small displacements) of the spring.
    The spring force F is written as F = โ€“ k x where, โ€œxโ€ is the displacement and โ€œkโ€ is the force constant. The negative sign denotes that the force is in a direction opposite to the displacement from the un-stretched state (in other words, the force which causes elongation of the spring, is directed away from the initial position of the spring). For an inextensible string, the force constant is very high.
  • Like in a spring, there is a restoring force in a string as well, called as tension.
Concept box:
Viscosity is the magnitude of internal friction in a fluid, resisting uniform flow.

5.9.1 Friction

  • Consider a body of mass, โ€œmโ€ on a horizontal table. The force of gravity on it would be: m.g (because โ€œForce=mass x accelerationโ€ by Newtonโ€™s first law, here, โ€œaโ€ is acceleration due to gravity). This force, m.g is cancelled by the normal reaction force, โ€œNโ€ of the table.
  • Now, suppose a small force, F is applied horizontally to the body, it may not be enough to move the body. But if โ€œFโ€ were the only external force on the body, it must move with acceleration F/m, however small.
  • But, the body may still remain at rest. This is because another force, โ€œfsโ€ comes into play in the horizontal direction which is opposite to the applied force, F, resulting in zero net force on the body.
  • This force, โ€œfsโ€ parallel to the surface of the body in contact with the table is known as frictional force, or simply friction (refer Fig. 5.10(a)).
Note box:
1. The subscript, โ€œsโ€ in โ€œ$f_s$โ€ stands for โ€œstatic frictionโ€ to distinguish it from kinetic friction โ€œ$f_k$โ€ that we consider later.
2. Note that static friction does not exist by itself. When there is no applied force, there is no static friction.
  • Friction comes into play the moment there is an applied force on the body. As the applied force, โ€œFโ€ increases, fs also increases, remaining equal and opposite to the applied force (up to ascertain limit), thus, keeping the body at rest. Hence, it is called static friction. Static friction opposes impending motion (motion that would occur in absence of friction) when a force is applied and goes on increasing as the applied force increases up to a certain limit. Hence, as the applied force exceeds this limit, the body begins to move.
  • It is found experimentally that the limiting value of static friction, (fs)max is independent of the area of contact and varies with the normal force, N approximately as:
    $$ \big( f_s \big) _{max} = ฮผ_s N โ€ฆ.5.13 $$
    Where, โ€œฮผsโ€ is a constant of proportionality which depends on the nature of the surfaces in contact. The constant ฮผs is called the coefficient of static friction. The law of static friction may thus be expressed as:
    $$ f_s โ‰ค ฮผ_s N โ€ฆ5,14 $$
  • As explained earlier, if the applied force, โ€œFโ€ exceeds (fs)max , the body begins to slide on the surface. It is found experimentally that when relative motion has started, the frictional force decreases from the static maximum value (fs)max.
  • Frictional force that opposes relative motion between surfaces in contact is called kinetic or sliding friction and is denoted by fk. Kinetic friction, like static friction, is found to be independent of the area of contact. Further, it is nearly independent of the velocity of the body as well. It follows a law similar to that for static friction:
    $$ f_kโ‰ค ฮผ_kN โ€ฆ5.15$$

where, โ€œ$ฮผ_k$โ€ is the coefficient of kinetic friction which depends only on the surfaces in contact.

  • Experiments show that $ฮผ_k$ is less than $ฮผ_s$. When relative motion has begun, the acceleration of the body according to the Second Law is$ (F โ€“ f_k)/m $.
  • For a body moving with constant velocity, F = fk. If the applied force on the body is removed, its acceleration is $ โ€“ f_k)/m $. A negative sign is used since the body is actually decelerating (or retarding) as it comes to rest.
Note box:
Friction does not oppose motion, but is the relative motion that friction actually opposes.
Example box:
You may recollect the example where we discussed how we experience jerks while a bus begins to move. Similarly, consider another scenario where a box is lying on the surface of a train. The box remains at rest even as the train is accelerating. This is due to the static friction that opposes its motion. In the absence of friction however, the floor of the train would move forward while the box would remain in its initial position and would hit the back of the train as the train moves. Static friction thus provides the same acceleration as that of the train to the box, keeping it stationary relative to the train.

Example 5.7 Determine the maximum acceleration of the train in which a box lying on its floor will remain stationary, given that the co-efficient of static friction between the box and the trainโ€™s floor is 0.15

Answer: Since the acceleration of the box is due to the static friction,
$$ ma= f_sโ‰ค ฮผ_sN = ฮผ_s mg $$
i.e , $$ aโ‰ค ฮผ_sg $$
โˆด $$ a_max = ฮผ_s g = 0.15 x 10 m s^{โ€“2} $$
$$ = 1.5 \space m \space s^{โ€“2} $$

Example 5.8: See Fig. 5.11. A mass of 4 kg rests on a horizontal plane. The plane is gradually inclined until at an angle ฮธ = 15ยฐ with the horizontal, the mass just begins to slide. What is the coefficient of static friction between the block and the surface?

Answer: The forces acting on a block of mass m at rest on an inclined plane are (i) the weight mg acting vertically downwards (ii) the normal force N of the plane on the block, and (iii) the static frictional force fs opposing the impending motion. In equilibrium, the resultant of these forces must be zero. Resolving the weight mg along the two directions shown, we have
$$ m g sin ฮธ = f_s , m g cos ฮธ = N $$
As ฮธ increases, the self-adjusting frictional force $f_s$ increases until at ฮธ = $ฮธmax$, $f_s$ achieves its maximum value, $ f_s{max}= ฮผs n $ Therefore, $$ tan ฮธ{max} = ฮผs or ฮธ{max} = tan^{โ€“1} ฮผ_s $$
When ฮธ becomes just a little more than $ฮธ_max$ ,there is a small net force on the block and it
begins to slide. Note that ฮธmax depends only on $ฮผ_s$ and is independent of the mass of the block.
For $ฮธ_max$ = 15ยฐ,
$ฮผ_s$ = tan 15ยฐ
= 0.27

Example 5.9 What is the acceleration of the block and trolley system shown in a Fig. 5.12(a), if the coefficient of kinetic friction between the trolley and the surface is 0.04? What is the tension in the string? (Take g =10 m $s^{-2}$). Neglect the mass of the string.

Answer: As the string is inextensible, and the pully is smooth, the 3 kg block and the 20 kg trolley both have same magnitude of acceleration. Applying second law to motion of the block (Fig. 5.12(b)),
30 โ€“ T = 3a
Apply the second law to motion of the trolley (Fig.5.12(c))
T โ€“$ f_k$ = 20 a.
Now$ f_k = ฮผ_k N $,
Here$ ฮผ_k$ = 0.04,bN = 20 x 10 = 200 N.
Thus the equation for the motion of the trolley is
T โ€“ 0.04 x 200 = 20 a Or T โ€“ 8 = 20a.
These equations give a = \frac {22}{23}m s โ€“2 = 0.96 m $s^{-2}$
and T = 27.1 N.

Rolling friction

  • A body like a ring or a sphere rolling without slipping over a horizontal plane should not experience friction. This is because, at every instant, there is just one point of contact between the body and the plane and this point has no motion relative to the plane.
  • In this ideal situation, kinetic or static friction is zero and the body should continue to roll with constant velocity. We know, in practice, this will not happen and some resistance to motion does occur. This resistance to motion of rolling bodies is known as rolling friction.
  • To overcome this rolling friction and keep the body rolling, some applied force is needed. For the same weight, rolling friction is much smaller (even by 2 or 3 orders of magnitude) than static or sliding friction. This is the reason why discovery of the wheel has been a major milestone in human history.
  • During rolling, the surfaces in contact get momentarily deformed a little, and this results in a finite area (not a point) of the body being in contact with the surface. The effect of the finite part of rolling body coming in contact with the surface is that, the component of the contact force parallel to the surface (that is, friction) opposes motion.
  • Although, friction does have a negative role as it opposes relative motion and thereby dissipates power in the form of heat, etc. Lubricants are a way of reducing kinetic friction in a machine. Another way is to use ball bearings between two moving parts of a machine as shown in Fig. 5.13(a).
  • Since the rolling friction between ball bearings and the surfaces in contact is very small, power dissipation (or output) is reduced. A thin cushion of air maintained between solid surfaces in relative motion is another effective way of reducing friction (Fig. 5.13(a)).
  • In many practical situations, however, friction is critically needed. Kinetic friction that dissipates power is nevertheless important for quickly stopping relative motion. For instance, only by application of brakes in machines and automobiles can they be stopped. Similarly, static friction is important in daily life. We are able to walk because of friction. It is impossible for a car to move on a very slippery road. Thus, on an ordinary road, the friction between the tyres and the road provides the necessary external force to accelerate the car.

Fig. 5.13 Some ways of reducing friction. (a) Ball bearings placed between moving parts of a machine. (b) Compressed cushion of air between surfaces in relative motion.

Questions for sections: 5.9 and 5.9.1:

  1. Name three external repulsive forces in nature. Explain how a body overcomes friction and begins to move (with references to static and kinetic friction).
  2. Explain rolling friction with the example of how a ball moves over a flat and horizontal surface.

5.10 Circular Motion

As you know, acceleration of a body moving in a circle of radius, โ€œRโ€ with uniform speed, โ€œvโ€ is v2/R and is directed towards the centre. According to the second law, the force, โ€œfโ€ providing this acceleration is:
$$ f = ma \bigg( here, a= \frac {v^2}{R} \bigg) $$
$$ f = \frac {mv^2}{R} (5.16)
where, โ€œmโ€ is the mass of the body.
This force directed forwards the centre is called the centripetal force.
Consider these examples,

  • When a stone is rotated in a circle by a string, the centripetal force is provided by the tension in the string.
  • For a car taking a circular turn on a horizontal road, the centripetal force is the force of friction. The circular motion of a car on a flat, banked road gives interesting applications on the laws of motion.
Fig. 5.14 Circular motion of a car on (a) a level road, (b) a banked road.

During motion of a car on a level road, three forces act on the car as depicted in fig: 5.14(a),

(i) The weight of the car, mg

(ii) Normal reaction, N

(iii) Frictional force, f

Refer figure, 5.14 above; as there is no acceleration in the vertical direction,

N โ€“ mg = 0

N = mg โ€ฆ 5.17

  • The centripetal force required for circular motion is along the surface of the road, and is provided by the component of the contact force between road and the car tyres along the surface. This, by definition is the frictional force.
  • Note that, it is the static friction that provides the centripetal acceleration. Static friction opposes the impending motion of the car moving away from the circle. Using equation (5.14) & (5.16) we get the result:

$$ fโ‰ค ฮผsN = \frac {mv^2}{R} $$ $$ v^2 โ‰ค \frac {ฮผ_sRN}{m} = ฮผ_sRg โ€ฆ 5.22 $$ [QN = mg] which is independent of the mass of the car. This shows that for a given value of $ฮผ_s$ and R,there is a maximum speed of circular motion of the car possible, namely $$ v{max} = \sqrt {ฮผsRg} $$ Motion of a car on a banked road We can reduce the contribution of friction to the circular motion of the car if the road is banked (Fig. 5.14(b)).

Since there is no acceleration along the vertical direction, the net force along this direction must be zero. Hence, N cos ฮธ = mg + f sin ฮธ (5.19a) .

The centripetal force is provided by the horizontal components of N and f.

$$ N \space sin ฮธ + f \space cos ฮธ = \frac {mv^2}{R} (5.20a) $$

$$ fโ‰ค ฮผ_sN $$

Thus, to obtain $v_max$ we put $ f= ฮผ_sN $.

Then Eqs. (5.19) & (5.20) become $ N cos ฮธ = mg + ฮผ _sN sin ฮธ (5.19b) $

$ N sin ฮธ + ฮผ_sN cos ฮธ = \frac {mv^2}{R} (5.20b)$

We obtain $ N= \frac {mg}{cos ฮธ-ฮผ_ssin ฮธ} $

Substituting value of N in Eq. (5.20b), we get $ \frac {mg \big( sin ฮธ -ฮผ_scos ฮธ \big) }{ cosฮธ-ฮผ_s sin ฮธ}= \frac {mv^2{max}}{R} $

$$ or ,v_{max} =\bigg( Rg \frac {ฮผ_stan ฮธ}{1-ฮผ_stan ฮธ} \bigg)^ \frac{1}{2} (5.21)$$

Comparing this with Eq. (5.18) we see that maximum possible speed of a car on a banked
road is greater than that on a flat road.

For$ ฮผ_s$ = 0 in Eq. (5.21 ),

$ v_o =\big( Rg \space tan ฮธ \big)^ \frac{1}{2} โ€ฆ 5.12 $

Example 5.10: A cyclist speeding at 18 km/h on a level road takes a sharp circular turn of radius 3 m without reducing the speed. The co-efficient of static friction between the tyres and the road is 0.1. Wil the cyclist slip while taking the turn?

Answer: On an unbanked road, frictional force alone can provide the centripetal force needed to keep the cyclist moving on a circular turn without slipping. If the speed is too large, or if the turn is too sharp (i.e. of too small a radius) or both, the frictional force is not sufficient to provide the necessary centripetal force, and the cyclist slips. The condition for the cyclist not to slip is given by Eq. (5.18) :
$$ v_2 โ‰ค ฮผ_s R g $$
Now, R = 3 m, g = 9.8 m $s^{-2}$, $ฮผ_s$ = 0.1. That is,$ฮผ_s R g = 2.94 m^2 s^{-2}$. v = 18 km/h = 5 m $s^{-1}$; i.e.,$v^2 = 25 m^2 s^{-2}$. The condition is not obeyed. The cyclist will slip while taking the circular turn.

Example 5.11: A circular racetrack of radius 300 m is banked at an angle of 15ยฐ.If the coefficient of friction between the wheels of a race-car and the road is 0.2, what is the (a) optimum speed of the race car to avoid wear and tear on its tyres, and (b) maximum permissible speed to avoid slipping?

Answer: On a banked road, the horizontal component of the normal force and the frictional force contribute to provide centripetal force to keep the car moving on a circular turn without slipping. At the optimum speed, the normal reactionโ€™s component is enough to provide the needed centripetal force, and the frictional forceis not needed. The optimum speed vo is given by
Eq. (5.22):
$$ v_O = \big( R g tan ฮธ \big) ^1/2 $$
Here R = 300 m, ฮธ = 15ยฐ, g = 9.8 m $s^{-2}$; we have
$$v_O = 28.1 m s^{-1}$$.
The maximum permissible speed vmax is given by Eq. (5.21):
$$ v_{max} = \bigg(Rg \frac {ฮผ_s +tan ฮธ}{1-ฮผ_s tan ฮธ} \bigg)^ {1/2} =38.1 ms^{-1} $$

Questions for section 5.10:

  1. From Newtonโ€™s second law, obtain the relation for centripetal force.
  2. Explain how centripetal force comes into play for a car moving on a circular track and the role of friction here; with necessary equations.

5.11 Solving Problems in Mechanics

  • We will need to consider an assembly of different bodies exerting forces on each other. Besides, each body in the assembly also experiences the force of gravity apart from the force exerted on each other.
  • When trying to solve a problem of this type, remember the fact that we can choose any part of the assembly. Next, we can apply the laws of motion to that part. However, it is necessary that we include all forces on the chosen part due to the remaining parts of the assembly.
  • We may call the chosen part of the assembly as the system and the remaining part of the assembly (plus any other agencies of forces) as the environment. We have followed the same method in solved examples as you will see.

Now, let us go through the steps one should follow while solving problems based on a system of forces;

(i) Draw a diagram showing schematically the various parts of the assembly of bodies, the links, supports, etc.

(ii) Choose one convenient part of the assembly as one system.

(iii) Again, draw a separate diagram which shows this system and all the forces on the system by the remaining part of the assembly. Include also the forces on the system by other agencies. Do not include the forces on the environment by the system. A diagram of this type is known as โ€˜a free-body diagramโ€™.
(Note that, this does not imply that the system under consideration is without a net force).

(iv) In a free-body diagram, include information about forces (their magnitudes and directions) that is either given or you are sure of (for example, the direction of tension in a string along its length). The rest should be treated as unknowns to be determined using laws of motion.

(v) If necessary, follow the same procedure for another choice of the system. In doing so, employ Newtonโ€™s third law. That is, if in the free-body diagram of A, the force on A due to B is shown as F, then, in the free-body diagram of B, the force on B due to A should be shown as โ€“F.

Let us now look at an example and learn to apply these steps practically;

Example 5.12: See (Fig. 5.15) A wooden block of mass 2 kg rests on a soft horizontal floor. When an iron cylinder of mass 25 kg is placed on top of the block, the floor yields steadily and the block and the cylinder together go down with an acceleration of 0.1 m s$^{โ€“2}$. What is the action of the block on the floor (a) before and (b) after the floor yields? Take g = 10 m s$^{โ€“2}$. Identify the action-reaction pairs in the problem.

Answer

(a) The block is at rest on the floor. Its free-body diagram shows two forces on the block, the force of gravitational attraction by the earth equal to 2 ร— 10 = 20 N; and the normal force R of the floor on the block. By the First Law, the net force on the block must be zero i.e.,R = 20 N. Using third law the action of the block (i.e. the force exerted on the floor by the block) is equal to 20 N and directed vertically downwards.

(b) The system (block + cylinder) accelerates downwards with 0.1 m s$^{-2}$. The free-body diagram of the system shows two forces on the system : the force of gravity due to the earth (270 N); and the normal force Rโ€ฒ by the floor. Note, the free-body diagram of the system does not show the internal forces between the block and the cylinder. Applying the second law to the system,

270 โ€“ Rโ€ฒ = 27 ร— 0.1N

ie. Rโ€ฒ = 267.3 N

By the third law, the action of the system on the floor is equal to 267.3 N vertically downward.

Action-reaction pairs
For (a): (i) the force of gravity (20 N) on the block by the earth (say, action); the force of gravity on the earth by the block (reaction) equal to 20 N directed upwards (not shown in the figure).
(ii) the force on the floor by the block (action); the force on the block by the floor (reaction).
For (b): (i) the force of gravity (270 N) on the system by the earth (say, action); the force of gravity on the earth by the system (reaction), equal to 270 N, directed upwards (not shown in thefigure).
(ii) the force on the floor by the system (action); the force on the system by the floor (reaction). In addition, for (b), the force on the block by the cylinder and the force on the cylinder by the block also constitute an action-reaction pair.

Action-reaction pairs

Consider the following action-reaction pairs:

In case(a);
(i) The force of gravity (20 N) on the block by the earth (say, action); the force of gravity on the earth by the block (reaction) equal to 20 N is directed upwards (forces are not shown in the figure).
(ii) The force on the floor by the block (action); the force on the block by the Floor (reaction).

In case(b);
(i) The force of gravity (270 N) on the system by the earth (say, action); the force of gravity on the earth by the system (reaction), equal to 270 N, directed upwards (forces are not shown in the figure).
(ii) In addition, the force on the block by the cylinder and the force on the cylinder by the block also constitutes for an action-reaction pair.

  • We can conclude that an action-reaction pair consists of mutual forces which are always equal and opposite between two bodies.
  • Two forces on the same body which happen to be equal and opposite can never constitute an action-reaction pair; like, the force of gravity on the mass in (a) or (b) and the normal force on the mass by the floor are not action reaction pairs.
  • These forces happen to be equal and opposite in case (a) since the mass is at rest.
  • They are not so for case (b). The weight of the system is 270 N, while the normal force Rโ€ฒ is 267.3 N.
  • The practice of drawing free-body diagram is of great help in solving problems in mechanics. It allows you to clearly define your system and consider all forces on the system due to objects that are not part of the system itself.

Q and A:

Why doesnโ€™t force of gravity and normal reaction on a body constitute for an action-reaction pair?

  • When the body is at rest, the normal force and the gravitational force acting on a body are equal and opposite. However, when the same body is in motion, the normal and gravitational force are not equal and opposite. Now, refer example 5.12 again. (Normal force is generally lower than the gravitational force when the body is in motion.)
  • Besides, for two forces two constitute for an action-reaction pair, they have to be equal and opposite under all circumstances.

Questions for section 5.11:

  1. What is a free body diagram? Explain the steps involved in drawing a free body diagram.