Preview:
We shall begin by defining ecology as the Interrelation and interaction between organism and environment.
Then, we will learn about the existing ecological hierarchy which proceeds from an organism up until a biotic community.
Further, we will learn about the different types of biomes or land forms formed due to seasonal variations. We shall then learn about responses and adaptations of organisms to biotic or abiotic factors. Under the head, population, we will cover some of its important attributes.
We will also learn about a special type of representation of arranging different age groups in a population which we will call, the age pyramid.
Next, we will define Population Growth as the number of individuals added per unit population per unit time because of higher natality and immigration; over mortality and emigration.
We shall then study about interaction of various organisms in the ecosystem. We will end this chapter with the study of the two types of interactions: Positive and Negative.
13.0 Introduction:
General definitions:
- Ecology: Interrelation and interaction between organism and environment.
- The word ecology was coined by Ernst Haeckal.
Types of Ecology:
1. Autecology/ Species Ecology: It is the study of relationships between environment and organisms or species.
2. Synecology: It is the study of relationship between the environment and a community.
| Note box: Environment: It is the sum total of all external conditions affecting life and development of an organism. |
Earth is made of three components: Atmosphere, Hydrosphere and Lithosphere.
Types of environment:
There are two types:
1. Microenvironment: The immediate and local surrounding of living organisms like, plants and animals.
2. Macro-environment: It is the environment surrounding the micro-environment.
Ecological Hierarchy/ Levels of Ecological Organization: Hierarchy is the graded organization of persons, principles or things ranked one above the other in ascending or descending order.
Ecological hierarchy starts at the level of an organism and proceeds to the levels of greater complexity namely, population, biotic community, ecosystems and biomes.
1. Organism/ Individual: It is the smallest and basic unit of ecological hierarchy. It exchanges material and information from its environment.
Organisms are also involved in transmission of characters to the next generation by way of reproduction.
2. Population: Group of similar individuals in a common area at a particular time. Different populations of the same organism in a particular geographical area are called, local populations. The local population genetically adapted to their specific environment is called ecotype. The subgroups of a population in a given geographical area are called, Deme.
3. Biological/ Biotic community: It is the grouping of organisms belonging to several species which live in a particular area and interact with one another. Three subunits of biotic community are:
a) Animal community: Animal population or community of consumers belong to animal community.
b) Plant community: Plant population or community of producers belong to the plant community.
c) Microbial community: Microbial population or community of decomposers belong to the microbial community.
Characteristics of a biotic community:
1. Species Diversity: The number of species and their relative abundance is referred to as, Species diversity. Species are related to one another through food webs and hence referred to as network species.
2. Keystone Species: They have a big influence in maintaining structure and function of community. For example, Fig trees in a tropical forest.
3. Critical link species: These network species form support network by linking them through their function. For example: Ants and bees in pollination of flowers.
4. Edge species: These species are present on the boundary of a community or eco-tone or transition zone. They bring about, edge effect.
| Note box: 1. Weather: Weather is the short term properties of atmosphere like, temperature, humidity, rainfall, pressure and cloud cover at a given place and time. 2. Climate: It is the average weather conditions in a particular area. It is determined by Temperature, Rainfall, Air pressure and solar radiations. |
Climate of an area for vegetation zones based on mean temperature along the latitude are listed below:
| Zone | Latitude | Mean annual temperature | Vegetation |
| Tropical | $$ O^o 20^o$$ | Above $24^oC$ | Tropical forests |
| Subtropical | $$ 2O^o 40^o$$ | $$ 17^o 20^oC$$ | Subtropical deciduous forests |
| Temperate | $$ 4O^o 60^o$$ | $$ 7^o 17^oC$$ | Mixed coniferous forests |
| Arctic and Antartic | $$ 6O^o 80^o$$ | Beloe $7^oC$ | Arctic vegetation |
Questions for the section:
1. What is ecology? State its types.
2. What are the two types of environment?
3. Describe the terms:
a) Local population
b) Ecotype
c) Deme
4. What are the three sub-units of biotic community?
5. List the characteristics of a biotic community.
13.1 Organism and its Environment
The rotation of our planet around the Sun and the tilt about its own axis cause annual variations in the intensity and duration of temperature, resulting in different seasons.
These variations along with annual variation in precipitation account for the formation of major biomes such as desert and rain forest.
Major Biomes:
- Terrestrial biome includes: Tundra, Taiga, deciduous forest, tropical rain forest, Chapparal, Tropical savannah, grasslands and desert.

- Aquatic biomes include: Lake, Pond, Marsh and Stream.
- Forest biomes have dense growing trees and a closed or nearly closed canopy cover.
Types of forest biomes:
- Tropical rain forests
- Tropical deciduous forests
- Temperate coniferous forests
- Each biome exhibits regional and local variations forming a wide variety of habitats. The major biomes of India are shown in Figure 13.2:

The major or key factors leading to the variations in habitats are:
1. Abiotic factors: Temperature, Water, Light and Soil.
2. Biotic factors: Pathogens, Parasites, Predators and competitors.
| Note box: 1. Microclimate: The variations in climatic conditions of a particular area of limited size. 2. Habitat: It is a specific place or locality where a species or population lives. It is limited by physical features and barriers of a particular area. 3. Micro habitat: These are subdivisions of habitat having different environmental conditions and different kinds of organisms. For example: Tree canopy and forest floor. 4. Ecological niche: Niche is the total interaction of the species with the environment or, it can be its functional position or status in an ecosystem. It is a specific part of a habitat containing individuals of a species with its factors like: Range of movement, Range of tolerance, Microclimate, Type of food and its availability, shelter and predators. For example: Rabbits are herbivores that live in a grassland or open woodland and eat plants. These rabbits alter soil by burrowing to live in a burrow. It adds faecal pallets to soil which are eaten by dung beetles. Rabbits are in turn eaten by cats or dogs. Every interaction of the rabbit with its environment can be regarded as a part of its niche which determines the place of its living and other organisms position in the same habitat. 5. Gause s principle: Gause s principle states that, there is usually a single species in an ecological niche of any given habitat. If the two species have the same niche in a community, then, a direct competition between them leads to elimination of one of them. This is called competitive exclusion. 6. E P Odum differentiated habitat and niche by saying that, habitat is organisms address and niche is its profession. For example, Water bugs like Belostoma and Corixa (water boatman) live in shallow waters at the edge of a pond. Both have the same habitat living side by side. Belostoma is a predator which feeds on tadpoles, snails, small fish and insects. Corixa scavenges on dead and decaying organisms. 7. Ecological equivalents (Different species in similar niches): Different animals occupying similar niches in different geographic regions are called ecological equivalents. For example, owls in wooded areas feed on shrews and mice, but in areas near human habitation, cats feed on shrews and mice; Arctic fox and African Jackal scavenge on bird eggs. Hence, each occupies a different ecological niche. |
Same species in different Niches:
- Same species may occupy different niches. For example, a tadpole is a primary consumer as it feeds on water weeds; whereas, the adult frog is a secondary consumer feeding on insects and spiders.
- Similarly, carnivorous fox become herbivore feeding on dried berries and grapes during winter.
| Habitat | Niche |
| Specific Physical area where a species resides | Component of habitat governed by functioning of an organism |
| A habitat has number of niches | A niche has no sub niches |
| A number of species occur in a habitat | Only one species is present in a Niche |
| Habitat of a species usually does not change | Niche of a species changes based on its requirements like food |
| Address of a organism | Profession of an organism |
13.1.1 Major Abiotic Factors
The major abiotic factors are: Temperature, Water, Light and Soil.
Temperature: Temperature influences soil conditions, organism s activities and climatic conditions. The vertical temperature gradient over earth s surface or lapse rate is 6.40-6.50C. The mean temperature lowers similarly from equator to poles giving rise to tropical, subtropical, temperate and arctic zones. Organisms living in these zones are respectively referred to as megatherms, mesotherms, microtherms and hekistotherms.
| Note box: 1. Microclimate: The variations in climatic conditions of a particular area of limited size. 2. Habitat: It is a specific place or locality where a species or population lives. It is limited by physical features and barriers of a particular area. 3. Micro habitat: These are subdivisions of habitat having different environmental conditions and different kinds of organisms. For example: Tree canopy and forest floor. 4. Ecological niche: Niche is the total interaction of the species with the environment or, it can be its functional position or status in an ecosystem. It is a specific part of a habitat containing individuals of a species with its factors like: Range of movement, Range of tolerance, Microclimate, Type of food and its availability, shelter and predators. For example: Rabbits are herbivores that live in a grassland or open woodland and eat plants. These rabbits alter soil by burrowing to live in a burrow. It adds faecal pallets to soil which are eaten by dung beetles. Rabbits are in turn eaten by cats or dogs. Every interaction of the rabbit with its environment can be regarded as a part of its niche which determines the place of its living and other organisms position in the same habitat. 5. Gause s principle: Gause s principle states that, there is usually a single species in an ecological niche of any given habitat. If the two species have the same niche in a community, then, a direct competition between them leads to elimination of one of them. This is called competitive exclusion. 6. E P Odum differentiated habitat and niche by saying that, habitat is organisms address and niche is its profession. For example, Water bugs like Belostoma and Corixa (water boatman) live in shallow waters at the edge of a pond. Both have the same habitat living side by side. Belostoma is a predator which feeds on tadpoles, snails, small fish and insects. Corixa scavenges on dead and decaying organisms. 7. Ecological equivalents (Different species in similar niches): Different animals occupying similar niches in different geographic regions are called ecological equivalents. For example, owls in wooded areas feed on shrews and mice, but in areas near human habitation, cats feed on shrews and mice; Arctic fox and African Jackal scavenge on bird eggs. Hence, each occupies a different ecological niche. |
| Note box: Bergmann s rule: Warm blooded animals exhibit larger size in cold climate than in hotter climates. Allen s rule: The extremities (legs, ears and tail) of warm blooded animals are smaller in colder areas as compared to animals of warmer seas. For example, Arctic fox has smaller pinna and shorter snout compared to desert fox. Rensch s rule: Birds in colder climate possess narrow wings as compared to broader wings of birds in warmer areas. Jordan s rule: If the temperature is lowered, some fishes possess larger size with larger number of vertebrae. A newly hatched cod fish has 58 vertebrae at 4-80C. But that which is grown at 10 to 110C has 54 vertebrae. |
Based on activity at a particular period of the day and at night, organisms can be classified into:
1) Diurnal (Active during day)
2) Nocturnal (Active during night)
3) Auroral (Active at dawn)
4) Vesperal (Active during evening)
5) Crepuscular (Active in twilight)
Depending upon the effect of external temperature over body temperature, organisms can be classified as:
a) Ectoderms/ Poikilotherms or cold blooded animals: They are organisms which cannot sustain high or low temperatures. Hence, ectoderms change their activity like, nocturnal feeding in warm areas or aestivation in a cool and shady place. In cold areas, they hibernate for a long time. Invertebrates, fish, amphibians and reptiles are examples of ectoderms.
b) Endotherms/ Homoisotherms or warm blooded animals: Despite outside temperature fluctuations, endotherms maintain a body temperature which is either constant or within tolerable limits. This phenomenon is called, Haemostasis.
Water:
- Water is the most important factor influencing the life of organisms. In fact, life on earth originated in water and is unsustainable without water.
- For aquatic organisms, the quality (which includes, chemical composition and pH) of water becomes important.
- The salt concentration (measured as salinity in parts per thousand), is less than 5 in inland waters, 30-35 in the sea and greater than 100 per cent in some hypersaline lagoons.
- Organisms which are tolerant to a wide range of salinities are called: euryhalines and others which are restricted to a narrow range are called: stenohaline.
- Many freshwater animals cannot live for long in sea water and vice versa because of the osmotic problems, they would face.
Light:
- It is the visible range of electromagnetic spectrum with a range of about: 390nm to 740nm. Light which is used for photosynthesis is called, Photosynthetically Active Radiation (PAR). It ranges from 400-700nm in wavelength.
- Life processes that are affected by light are: Photosynthesis, growth, pigmentation, movement, daily rhythm in animals and photoperiodism.
- Opening or closing of flowers in response to light or darkness is called, Photonasty. Folding of leaves in response to darkness is called, Nyctinasty.
| Note box: Light zones in aquatic habitats: 1. Littoral zone: It is the shallow region at the edge of a sea or a pond or a lake. Light reaches the bottom and producers are found from surface to bottom. 2. Limnetic zone: It is the open water zone where deep water exists. The amount of light and oxygen decreases with increase in depth. Limnetic zone can be divided into three zones: Photic, Aphotic/ profundal and Benthic zones. Photic zone: It comprises of the region where light can penetrate. It has two portions: Upper euphotic and lower disphotic regions. Euphotic region receives more light than the compensation point whereas; disphotic region receives light at or below compensation point. 3. Profundal/ Aphotic zone: It is the zone of deep water below photic zone and above benthic zone. As there is darkness, no producers are found. Instead, only consumers exist in the zone. 4. Benthic zone: It is the bottom layer of the aquatic habitat. In deep lakes and seas, there is a total darkness. Deep lakes contain microbes, slugs and some fish in benthic zone. Whereas, deep sea contains luminescent organisms like, Angler fish and Gupler Eeel. |
Soil: It is the upper weathered humus containing part of earth s surface which supports terrestrial plant life.
Some important terms regarding soil:
Weathering: Process of breaking of rocks into fine powder due to atmospheric changes, mechanical forces, chemical changes and biological breakdown.
Pedogenesis: Process of conversion of weathered mineral matter to soil.
Pedology: It is the study of soil as a science.
Humification: It is the formation of humus.
Eluviation: It is the washing down or leaching of soil particles to upper layers of soil profile.
Illuviation: It is the deposition of soil particles in lower layers of soil profile.
Soil profile: It is the cross-sectional appearance of morphologically and physic-chemically different layers present one over the other.
The five horizontal layers of the soil profile are: O, A, B, C and R (As depicted below);

Soil Composition:

Types of mineral particles:
1. Gravel (Pebbles) 1 to 10 mm
2. Sand (SiO2/ Quartz) 0.02 to 1mm
3. Silt (Very fine quartz grains) 0.02 to 0.002mm
4. Clay (Hydrated silicates of aluminium) Less than 0.002mm
Types of soils:
1. Sandy soil (Porous, loose with little water holding capacity and inorganic nutrients)
2. Clayey soil (Compact, well hydrated, little aerated and chemically fertile)
3. Loamy soil (High in nutrition, aerated and hydrated; good for plant growth)
Soil water:
Holard: Total water content of soil is called holard. It consists of two parts:
1. Chesard: Water that is available to plants. It comprises of: Capillary water.
2. Echard: Water which is not available to plants. It comprises of: Gravitational water, hygroscopic water and combined water.
Soil erosion: The removal of top layer of soil by wind and water is called soil erosion.
Types of soil erosion:
1. Sheet erosion: Removal of thin layer or sheet from surface of soil.
2. Rill erosion: Formation of finger-like or groove-like narrow depressions or rills due to run off water.
3. Gully erosion: Development of deeper and wider channels called gullies or ravines.
Soil conservation or Control of soil erosion:
1. Crop rotation: It is the practice if sowing different crops usually, legume and non-legumes in successive seasons on the same plot of land.
2. Mixed cropping: Growing of two or more crops on the same land.
3. Mulching: Covering of harvested field with plant litter to decrease weeds and run off; and to increase soil moisture.
4. Strip cropping: Growing of perennial crops alternating with annuals.
5. Terracing: Division of slope into number of flat fields for slowing down water flow.
6. Contour farming: It is the raising of small lands on edges of fields to prevent erosion of forests on barren land.
7. Adopting afforestation.
8. Reforestation: Cultivation of forests in deforested areas is called, reforestation.
Questions for section 13.1.1:
1. List the three major types of biomes?
2. Describe the term: Ecological niche. Give 2 examples for same species in different niches.
3. List and explain the major abiotic factors.
4. Classify organisms based on:
a) The activity at a particular period of the day and at night.
b) Effect of external temperature over body temperature
5. Describe the terms:
a) Weathering
b) Pedogenesis
c) Pedology
d) Humification
e) Eluviation
f) Illuviation
g) Illuviation
h) Soil profile
i) Holard
j) Chesard
k) Echard
6. Give the pie chart explaining composition of soil.
7. List the ways in which soil erosion can be controlled.
13.1.2 Responses to Abiotic Factors
External environment changes from place to place and from season to season at any given time in the same place. Organisms have developed a constant body temperature and internal environment.
Homeostasis: The characteristic property of a system by virtue of which it regulates its internal environment to maintain its state of equilibrium, despite of environmental changes is called homeostasis.
In response to stressful abiotic conditions organisms regulate, conform, migrate and suspend their activities.
We shall now study about these responses,
1. Regulate:
- Some organisms are able to maintain homeostasis by physiological or behavioural means which ensures constant body temperature. This is called thermoregulation. Others maintain constant osmotic concentration and called osmoregulation.
- All birds and mammals, and a very few lower vertebrate and invertebrate species are capable of such regulation. For example, marine fishes excrete salt through specialized glands. But if kept in fresh water, water enters the body by endosmosis and the fishes are killed. Fresh water fish have salt absorbing mechanisms.
2. Conform:
- Confirmers are organisms whose body temperature and body fluid osmolarity changes according to change in ambient environment.
- Almost 99% of animals and plants are conformers. They don t have a body temperature and body fluid osmotic concentration regulatory mechanism.
- Thermoregulation in conformers requires 5 times higher metabolic rate than a regulator. Smaller animals because of larger surface area relative to their volume lose body heat quickly in winters.
- Some aquatic invertebrates are able to maintain homeostasis up to a certain limit beyond which they behave like conformers. They are called as partial or limited regulators.
3. Migrate:
| Definition box: Migration is the two-way movement of a whole population from a stressful habitat to a more hospitable area and their return when the stressful period is over. |
Types of migration:
1. Daily migration is movement of animals including birds from area of their shelter to feeding grounds several kilometres away.
2. Periodic migration is movement of animals and birds when their population crosses the carrying capacity of habitat. For example, in arid areas, the population of locust continues to grow till the food gets depleted. Hence, they fly out in swarms in search of new feeding areas.
3. Anadromous migration: It is the migration of organisms from sea to fresh water. For example, Petromyzan and Salmon migrate from sea to fresh water for spawning.
4. Seasonal migration:
- It is the movement of a population from one region to another and back, to avoid extreme environmental conditions and for food.
- For example,
- Arctic tern travels 17,600 km every year from North Pole to Antartica and back. It nests near north-pole in summer and flies south during autumn to Antartica from where it returns during spring.
- Bharatpur National park in Rajasthan receives thousands of migratory birds from Siberia and other colder northern regions every winter.
5. Suspend: It is the temporary suspension of activities by organisms to survive through unfavourable conditions. For example, Bacteria, fungi and lower plants produce thick walled spores to tide over unfavourable conditions. When favourable conditions return, they again germinate.
Types:
1. Hibernation: It is the phenomenon of passing winter in a resting or dormant condition. It is also called, winter sleep. For example, frogs and northern ground squirrels rest in a warm shelter during winter. They body temperature drops but is above external temperature. Also, the heart beat and breathing is also lowered.
2. Aestivation: It is the state of inactivity and metabolic depression during summer and dry periods. For example, snakes, fish and frog move to a moist, cool and shady place during summer.
3. Diapause: It is a temporary suspension or interruption in development of an organism due to unfavourable environmental conditions. For example, insects develop an impermeable outer covering in summer or dry themselves out to sustain draught.
Questions for section 13.1.2:
1. Define Homeostasis.
2. List and explain the various responses of organisms to stressful abiotic conditions.
3. Explain the types of migration and suspension.
13.1.3 Adaptations
| Definition box: Ecological adaptations are features evolved or developed by organisms to live successfully and comfortably in a given set of environmental conditions. It may be morphological, physiological, behavioural or a combination of them. |
| Example box: In the absence of an external source of water, the kangaroo rat in North American deserts is capable of meeting all its water requirements by internal fat oxidation, in which water is a by-product. It also has the ability to concentrate its urine so that minimal volume of water is lost during removal of excretory products. |
Adaptations in different organisms:
1. Xerophytes: These are desert plants which have a thick cuticle on their leaf surfaces and have their stomata arranged in deep pits to minimise water loss through transpiration. They also have a special photosynthetic pathway called, CAM that enables their stomata to remain closed during day time.
2. In some desert plants like Opuntia, the leaves are reduced to spines. Here, the photosynthetic function is taken over by the flattened stems.
3. Mammals from colder climates generally have shorter ears and limbs to minimise heat loss (Called, Allen s Rule).
4. In the polar seas, aquatic mammals like seals have a thick layer of fat called, blubber below their skin that acts as an insulator and reduces loss of body heat.
5. Altitude sickness: It occurs due to non-availability of oxygen at low atmospheric pressures at high altitudes. Its symptoms include nausea, fatigue and heart palpitations. But, generally the body gets acclamatised because it tries to compensate low oxygen availability by increasing red blood cell production, decreasing the binding affinity of hemoglobin and by increasing breathing rate.
6. Humans and other mammals show metabolic and physiological activities at 370C.
7. Archaebacteria flourish in hot springs and deep sea hydrothermal vents where temperatures far exceed 1000C.
8. Desert lizards manage to keep their body temperature fairly constant by behavioural means. For instance, they go to shade if their temperature increases.
9. Some fishes are barophilic and can thus live at ocean depths greater than 100 times normal atmospheres.
Ecotypes are local population of a species that are adapted genetically to particular environmental variations. The genetic differences in ecotypes of a species are very small so that they can interbreed.
Ecocycline is the transition between two ecotypes exhibiting gradual change from one ecotype to other because of inter-breeding.
Ecophenes: These are varied local populations that are genetically similar but differ in morphological and physiological traits to adapt to a given environment.
Phenotypic plasticity: It is the collective phenotypic variations produced amongst individuals of a species due to influence of local conditions of habitat.
Stratification: It is the arrangement of plants in various strata according to their tolerance for heat from the sun in a forest.
| Characteristics | Sunplants/ Heliophytes | Shade plants/ Sciophytes |
| Internodes | Short and thick | Soft, slender and large |
| Leaves | Small and thick | Thin and large sized |
| Cuticle | Thick | Thin |
| Epidermal cells | Thick | Thin |
| Stomata | Sunken | Level with surface |
| Leaves | Palegreen | |
| Palisade paranchyma | Well developed | Less developed |
| Cells Intercellular | Small | Large |
| Spaces | Small | Large |
| Root system | Extensive | Not extnsive |
Plant adaptations to water scarcity and heat:
Xerophytes: These are plants present in dry habitats where the environment favours higher transpiration rates than absorption rates.
There are four types of xerophytes:
1. Ephemerals or draught escapers live for a brief period during the rains and pass the rest of the year in seed form. Example: Euphorbia.
2. Annuals or draught evaders live for few months after stoppage of rains. Example: Echinops.
3. Succulents or draught resistant plants have fleshy organs in which water and mucilage is stored.
Succulents exhibit the following properties:
a) Chylocauly: Presence of fleshy stems. For example: Asparagus
b) Chylophylly: Presence of fleshy leaves. For example: Aloe Vera
c) Chylorhizy: Presence of fleshy roots. For example: Asparagus
Phylloclades: These are leaf scales or leaf spines present in chylocaulous forms.
Cladodes: Presence of 1 or 2 internode long stems in succulents.
4. Non succulent perennial xerophytes or draught endurers: These have smaller shoot system and extensive root system.
5. Phreatophytes: These have very deep roots and thus reach the water table. Hence, they are used to locate ground water table. For example: Tamarix.
Plant adaptations to Aquatic Environment
Hydrophytes/ Aquatic plants: They live permanently immersed, either partially or completely in aquatic habitats. There are four types of hydrophytes:
1. Free floating hydrophytes: These plants float freely on the surface of water but are not rooted in the soil. These plants are in contact with both water and air. Examples include: Eichhornia, Pistia, Wolffia, and Lemna.
2. Floating but rooted hydrophytes: These hydrophytes are rooted in the mud but their leaves and flowering shoots float on the water surface. Examples include: Victoria regia, Nymphaea, Nelumbium and Marsilea.
3(a) Submerged hydrophytes (floating): Plants which grow below the water surface and not in contact with atmosphere are called free floating submerged hydrophytes. Examples include: Ceratophyllum, and Utricularia.
3(b) Submerged hydrophytes (Rooted): These plants are completely immersed in water and rooted in the mud. Examples include: Hydrilla, Vallisneria and Potamogeton.
4. Amphibious Hydrophytes:
- These plants grow in shallow waters. Their roots, some part of stems and leaves are submerged in water but, some flowering shoots spring well above the water surface as well.
- These plants are adapted to both aquatic and terrestrial modes of life.
- The aerial parts of these amphibious plants show mesophytic characters, while the submerged parts develop true hydrophytic characters. Examples include: Limnophylla heterophylla, Typha and Sagittaria.
Special features of hydrophytes:
1. Mucilage: Provides protection from epiphytes, pathogens and animals. It also acts as a lubricant.
2. Roots: Absent (As in, Utricularia), Poorly developed (As in, Hydrilla) or used for balancing (As in, Pistia).
3. Root caps are replaced by root pockets.
4. Mechanical tissue is absent.
5. Xylem is poorly developed or absent.
6. Aerenchyma helps in aeration, makes different parts light, spongy and flexible.
| Note box: Heterophylly: It is the occurrence of more than one type of leaf. Example: Ranunculus. |
Plant adaptations to saline environments:
| Definition box: Halophytes: These are plants living in saline habitats by tolerating high concentrations of salts in rooting medium and getting water supply from it. Examples include: Saline habitants, Saline soils, mangroves, coastal dunes and tidal marshes. |
1. Many mangroves (marshy areas found in tropical deltas and saline ponds near sea shore) excrete salts with salt secreting glands on the leaves. For example: Avicennia.
2. Some plants have water storage tissues to dilute salt. Example: Rhizophora (Red mangrove).
3. A number of plants possess small, negatively geotropic, vertical roots called, Pheumatophores which have lenticels for gaseous exchange.
Plant adaptations to oligotrophic soils:
Oligotrophic soils are soils which are poor in nutrients. Examples include: tropical rain forests, mycorrhiza present in roots of trees help in retrieval of elements like, phosphorus, absorption of water and protection from soil pathogens. There are two types of Mycorrhiza:
1. Endomycorrhiza/ Vesicular arbuscular mycorrhiza (VAM) which produce oval vesicles (for lipid storage) and finger-like arbuscles (for absorption of nutrients) and;
2. Ectomycorrhiza which are intercellular in the cortical region of root.
Animal adaptations: Helps in feeding, protection from predators, breeding and to avoid stressful conditions.
Adaptations in animals:
Migration: It is a two way movement of an animal group to other places for food and better climate.
Camouflage: It is the ability to blend with surroundings or background for protection or aggression. For example, grasshopper or praying mantis camouflages with surrounding foliage.
Mimicry: Resemblance of one species with another in order to obtain advantage against predation. The animal which imitates is either distasteful or ferocious to the predator.
Types of mimicry:
1. Batesian Mimicry:
Venomous and poisonous animals tend to develop flashy traits like, coloration and menacing sounds which alert other animals about their danger. This phenomenon of showing coloration is known as aposematism. In the Batesian mimicry, the mimicking organism copies the flashy traits of a venomous or poisonous organism present in its habitat in order to make the predators think that they are a harmful species. Thus, the mimetic organism avoids being caught and eaten by predators.
2. Mullerian Mimicry:
Sometimes, there are different poisonous or venomous species coexisting at the same time in the same habitat that are all being hunted by the same predator. In some of these cases, even when only one of these species has an aposematic trait to dispel predators, the rest of them try to mimic it and develop this trait (or traits). All species that exhibit Mullerian Mimicry are harmful.
3. Echolocation:
Bats use echolocation to navigate and find food in the dark. To echolocate, bats send out sound waves from their mouth or nose. When the sound waves hit an object they produce echoes.
4. Warning coloration:
Dart frogs in tropical rain forests of South America are brightly coloured and highly poisonous, thereby deterring predators.
5.Hibernation, Aestivation and Diapause.
6. Cold hardening: It is an adaptation to excessive cold used by sea animals. Example: Bernacles on whales and spiders. They develop extra solutes like glycerol and antifreeze proteins which lower the freezing point of body fluids.
7. Adaptation to water scarcity: Animals like, kangaroo and rats exhibit two types of adaptations: Ability to tolerate arid conditions and reducing water loss. The rat does not come out of its burrow during the day.
Questions for section 13.1.2:
1. Define: Ecological adaptations. Give one example.
2. Explain the adaptation in the following organisms:
a) Xerophytes
b) Opuntia
c) Aquatic mammals.
3. Explain with examples, plant adaptations to water scarcity and heat.
4. Explain with examples, plant adaptations to aquatic and saline environments.
5. Explain with examples, plant adaptations to oligotrophic soils.
6. What is mimicry? List and explain its types.
13.2 Populations
13.2.1 Population Attributes
A population is comprised of groups of individuals which share or compete for similar resources and interbreed among themselves.
Examples include: cormorants in a wetland, rats in an abandoned dwelling, teakwood trees in a forest, bacteria in a culture plate and lotus plants in a pond.
Important terminologies:
1. Local Population: Permanent group of interbreeding individuals of a species in a space or geographical area at a particular time.
2. Metapopulation: It is a complex of local populations interconnected by dispersing individuals.
3. Population ecology (or, Demecology): Concerns all aspects of a population and the various factors affecting its growth, density, size, multiplication, natality, mortality, competition and tolerance. It links ecology to population genetics and evolution.
4. Population attributes (or, population characteristics): Important population attributes are: Density, natality, mortality, population dispersal, age distribution, biotic potential and environmental resistance.
Natality (or) Birth Rate:
- It is the rate of production of new individuals per unit of population, per unit time through birth.
- The maximum natality or birth rate achieved under ideal conditions is called Biotic potential.
- The actual birth rate under existing conditions is called, Realized natality.
Mortality (or, Death rate): It is the rate of loss of individuals per unit time due to death.
| Example box: 1. Say a pond had 20 lotus plants the previous year and its population has increased to 28 through reproduction at present. The birth rate is then, 8/20= 0.4 offspring per lotus per year. 2. If 4 fruit flies died in a population of 40 in a week, then, the death rate during that period is 4/40= 0.1 individuals per fruitfly per week. |
5. Sex Ratio: Number of males to number of females in a population is called, sex ratio.
Based on age, population is classified into:
There are three age groups:
1. Pre reproductive
2. Reproductive
3. Post-reproductive
| Note box: 1. Positive growth is experienced in populations having larger young individuals. 2. Static or zero growth is seen when the various age groups are evenly balanced. 3. Negative growth is shown by population with large number of post-reproductive and less number of pre-reproductive individuals. |
Age pyramid: It is a graphical representation of different age groups in a population with pre reproductive age groups at the base, reproductive age groups at the middle and post reproductive age group at the top.
Types of age pyramids:
1. Expanding or Triangular age pyramid: Show a very large number of pre-reproductive individuals, moderate number of reproductive individuals and fewer post reproductive individuals. The population is said to be growing.
2. Stable (or) Bell shaped age pyramid: The pre-reproductive and reproductive individuals are almost equal. Post reproductive individuals are fewer. The population is stable.
3. Declining (or) Urn shaped age pyramid: The percentage of reproductive age group is higher than individuals in pre-reproductive age group. Sizeable number of post-reproductive individuals is seen. The population experiences negative growth.
Population density: Population density is an indicator of the population status in the habitat.
| Definition box: Population density is the number of individuals per unit area at a given time. $$ Population \space density (D) = \frac {Number \space of \space individuals (N)}{Space (S)}$$ |
Features:
- It could be as low as <10 (like in the case of Siberian cranes at Bharatpur wetlands in any year) or into millions (in the case of Clamydomonas in a pond).
- Population density (designated as N), need not necessarily be measured in numbers only.
- For instance, in an area, if there are 200 Parthenium plants but only a single huge banyan tree with a large canopy, stating that the population density of banyan is low relative to that of Parthenium amounts to underestimating the enormous role of the Banyan in that community. In such cases, the per cent cover or biomass is a more meaningful measure of the population size.
- Total number can also not be adoptable if the population is huge and counting is impossible or very time-consuming like in case of, a culture of bacteria in a petri dish while, number of fish caught per trap is good enough measure of its population density in a lake. For example, the tiger census in our national park and tiger reserved is often based on pug marks and faecal pellets which not involve actual counting.
13.2.2 Population Growth
| Definition box: Population Growth is the number of individuals added per unit population per unit time because of higher natality and immigration; over mortality and emigration. |
Population size is not a static parameter. It keeps changing with time, depending on food availability, predation pressure and adverse weather. The changes indicate whether a given population is flourishing or declining.
Terms associated with population growth:
(i) Natality refers to the number of births during a given period in the population that are added to the initial density.
(ii) Mortality is the number of deaths in the population during a given period.
(iii) Immigration is the number of individuals of the same species that have come into the habitat from elsewhere during the time period under consideration.
(iv) Emigration is the number of individuals of the population who left the habitat and gone elsewhere during the time period under consideration.

So, if N is the population density at time t, then its density at time t +1 is
$$ N_{t+1} = N_t + [(B + I) (D + E)] $$
| Note box: Vital index: It is the present ratio of natality in relation to mortality. It shows normal growth rate of population. Vital index = $\frac{N}{M} \times 100$ $$ Vital \space index = \frac { N}{M } \times 100 $$ Population dispersal is the movement of individuals into or out of population to prevent overcrowding, food shortage and predation. It affects population size. There are three types of population dispersal: Migration: It is the two-way movement of entire population. It does not affect the size of the population. Emigration: It is the permanent outward movement of individual from a population. Immigration: It is the permanent inward movement of individuals from outside into a population. |
Growth models:
There are two types of growth models: a) Exponential b) Logitsic
Exponential growth model (or) J-shaped growth curve:
- Unlimited resources in a habitat lead to unprecedented growth of a population. Here, equilibrium does not occur in terms of population size.
- The population grows in an exponential or geometric fashion. The three phases are: Lag, Log and Crash.
- In the Crash phase, the population undergoes a sharp decline due to mass scale deaths.
- If in a population of size N, the birth rates (per capita births) are represented as b and death rates (per capita death rates) as d, then the increase or decrease in N during a unit time period t (dN/dt) will be:
dN/dt = (b d) N
Let (b d) = r, then, dN/dt = rN
Where, dN/dt = change in population size.
r Growth rate (B-D)
N Population size
B Birth rate
D Death rate
| Note box: r in this equation is called the intrinsic rate of natural increase and is a very important parameter chosen for assessing impacts of any biotic or abiotic factor on population growth. |
| Example box: For the Norway rat, the r is 0.015, and for the flour beetle it is 0.12 when compared to humans in 1981, when the r value for human population in India was 0.0205 will give us the magnitude of r value at present given, the birth and death rates. |

Figure 13.5 Population growth curve a when responses are not limiting the growth, plot is exponential, b when responses are limiting the growth, plot is logistic, K is carrying capacity
The above equation describes the exponential or geometric growth pattern of a population (as depicted by Figure 13.5) and results in a J-shaped curve when we plot N against time. With basic calculus, we can derive the integral form of the exponential growth equation as,
$$ N_t = N_0 e^{rt} $$
Where,
$N_t$ = Population density after time t
$N_0$ = Population density at time zero
r = intrinsic rate of natural increase
e = the base of natural logarithms (2.71828)
Any species growing exponentially under unlimited resource conditions can reach enormous population densities in a short time. Darwin showed how even a slow growing animal like elephant could reach enormous numbers in the absence of checks.
The following is an anecdote popularly narrated to demonstrate dramatically how fast a huge population could build up when growing exponentially:
| Story box: The king and the minister sat for a chess game. The king, confident of winning the game, was ready to accept any bet proposed by the minister. The minister humbly said that if he won, he wanted only some wheat grains, the quantity of which is to be calculated by placing on the chess board one grain in Square 1, then two in Square 2, then four in Square 3, and eight in Square 4, and so on, doubling each time the previous quantity of wheat on the next square until all the 64 squares were filled. The king accepted the seemingly silly bet and started the game, but unluckily for him, the minister won. The king felt that fulfilling the minister s bet was so easy. He started with a single grain on the first square and proceeded to fill the other squares following minister s suggested procedure, but by the time he covered half the chess board, the king realised to his dismay that all the wheat produced in his entire kingdom pooled together would still be inadequate to cover all the 64 squares. Now, think of a tiny Paramecium starting with just one individual and through binary fission, doubling in numbers every day, and imagine what a mindboggling population size it would reach in 64 days if, food and space remain unlimited. |
Logistic growth model (or) Verhulst-pearl growth curve (or) s-shaped growth curve or sigmoid growth curve:
- It is the more common form of population growth.
- A population growing in a habitat with limited resources show initially, a lag phase of slow growth, followed by log phase of exponential acceleration and deceleration and finally an asymptote, when the population density reaches the carrying capacity. A plot of N in relation to time (t) results in a sigmoid curve. This type of population growth is called Verhulst-Pearl Logistic Growth (same curve as in figure 13.5).
Terms associated with logistic model:
- Carrying capacity / Resources (K): Carrying capacity of an environment or habitat is the maximum number of individuals of a population which can be provided with food, water and space.
- Environmental resistance: It is the sum total of all abiotic and biotic factors which checks raise in population size and restricts the species from realizing its biotic potential. Effect of environmental resistance on biotic potential can be denoted by:
$$ dN/dt = rN \bigg( \frac {K-N}{K} \bigg)$$
Where,
dN/dT is change in population zone
N = Population density at time t
r = Intrinsic rate of natural increase
K = Carrying capacity
| Note box: 1. The pacific salmon fish and bamboo breed only once while most birds and mammals breed many times in their lifetime. 2. Oysters and Pelagic fishes produce a large number of small-sized offsprings whereas; birds and mammals produce small number of large sized offsprings. |
13.2.3 Life History Variation
Populations evolve to maximise their reproductive fitness, also called Darwinian fitness (high r value), in the habitat in which they live. Under a particular set of selection pressures, organisms evolve towards the most efficient reproductive strategy.
For example, some organisms breed only once in their lifetime (Pacific salmon fish, bamboo) while others breed many times during their lifetime (most birds and mammals). Some produce a large number of small-sized offspring (Oysters, pelagic fishes) while others produce a small number of large-sized offspring (birds, mammals).
Ecologists suggest that life history traits of organisms have evolved in relation to the constraints imposed by the abiotic and biotic components of the habitat in which they live. Evolution of life history traits in different species is currently an important area of research being conducted by ecologists.
13.2.4 Population Interactions
- Any natural habitat will not be inhabited by a single species. The minimal requirement is one more species on which it can feed. Even a plant species, which makes its own food, cannot survive alone; it needs soil microbes to break down the organic matter in soil and return the inorganic nutrients for absorption. Animals, plants and microbes do not live in isolation but interact in various ways to form a biological community. These are called, interactive linkages.
- Interspecific interactions arise from the interaction of populations of two different species.
- Interspecific interactions could be beneficial (or positive), detrimental (negative or antagonistic) or neutral (neither harm nor benefit) to one of the species or both.
- A + sign for beneficial interaction, – sign for detrimental and 0 for neutral interaction is used to denote the type. Let us now look at all the possible outcomes of interspecific interactions (Table13.1):

Positive interactions:
1. Commensalism: It is the type of interaction in which one of the partners is benefited whereas the other is neither benefited nor harmed.
| Example box: 1. Cattle egret (a bird) and grazing cattle: The egret feed on insects uprooted by the grazeers. 2. Sea anemone and clown fish: Fish gets protection from predators because of stinging tentacles of anemone. |
Commensalism in different organisms:
1(a) Periodic contact: Sucker fish has a sucker which attaches to underside of shark and gets food from small pieces of left over when shark is feeding on its prey.
1(b) Continuous contact: Bernacles are attached to surface of whales for shelter and for obtaining food.
2. Mutualism/ Symbiosis: It is an obligate, mutually beneficial interaction between individuals of two different species. For example, in Lichens, there exists mutual interaction between fungi (which helps in protection, fixation and absorption of water), algae (helps in food production), rhizobium (helps fix nitrogen) and roots of nodulated legumes (provides shelter).
3. Myrmecophily: An association between trees (shelter and food) and ants (provide protection).
4. Zoophily: Anassociation between angiosperms (provide nectar) and animals (help in pollination).
5. Ophrys: An orchid uses sexual deceit to get pollinated. It resembles female bumble bee. The male bumble bee tries to copulate with it (pseudo copulation) thereby, pollinating other flowers it visits.
6. Fig and fig wasp Co-evolution: Fig depends on wasp for pollination and wasp depends on fig for food and survival.
*insert figure 13.6, insert title: Figure 13.6 Mutual relationship between fig tree and wasp: (a) Fig flower is pollinated by wasp; (b) Wasp laying eggs in a fig fruit*
7. Proto-cooperation: It is a non-obligatory, mutually beneficial interaction between two different organisms. For example, cattle egret feed on lice and ticks of cattle.
8. Crocodile bird feeds on leeches inside its mouth.
Negative interactions:
Amensalism: Amensalism is the inhibition of one organism by other by secretion of allochemicals by a phenomenon called, antibiosis. For example: Trichoderma (fungus) inhibits growth of Aspergillus (fungus).
Types of Amensalism:
1. Autopathy: It is the prevention of growth of other its own species by an organism. For example, silver oak does not allow its own seeds to germinate.
2. Antibiotics: These are bio-chemicals produced by certain organisms to inhibit other organisms. For example, Pencillium produces pencillin against staphylococcus.
3. Competition: It is the rivalry between two organisms for a particular resource.
Types of competition:
a) Intraspecific competition: The competition between members of the same species for limited resources. Like, Lion vs. Lion.
b) Interspecific competition: It is a form of competition in which individuals of different species compete for the same resources in an ecosystem. Like: Tiger vs. Cheetah; Flamingos and fishes in South American lakes compete for zooplanktons in the lake.
c) Interference competition: It refers to the competition between two species not because of shortage of food but due to the feeding efficiency of one species being better than the other. For example, Abingdon tortoise in Galapagos Islands became extinct when goats were introduces on the island.
| Concept box: 1. Competitive release: Reversal of species distribution by experimental removal of the superior species from a geographical area. For example, according to Connel s experiments, larger and competitively superior barnacle, Balanus dominates the smaller barnacle, Chathamalus. 2. Gause s competitive exclusion principle: It states that two closely related species competing for the same resources cannot co-exist indefinitely and the competitively inferior one will be eliminated eventually. 3. Resource partitioning: It is the method of avoiding competition between species by choosing them such that they have different foraging activities. |
4. Parasitism: It is the phenomenon by which an organism (the parasite) draws nourishment from another organism called, host.
Parasitism causes a decrease in rate of growth, survival and reproduction of the host; thereby reducing its population density.
| Example box: 1. Plasmodium needs a vector (like mosquito) to cause malaria in man. 2. Liver flue needs two immediate hosts to complete its life-cycle. |
Types of parasites:
1. Ectoparasites: Parasites that feed on the external surface of the host organism are called ectoparasites. Examples include: Lice on humans and ticks on dogs; Many marine fish that are infested with ectoparasitic copepods; Cuscuta, a parasitic plant that is commonly found growing on hedge plants, has lost its chlorophyll and leaves in the course of evolution. Hence, it derives its nutrition from the host plant.
2. Endoparasites: Endoparasites are those that live inside the host body at different sites like: liver, kidney, lungs and red blood cells.
The life cycles of endoparasites are more complex because of their extreme specialisation.
Brood parasitism: In this type of parasitism, the parasitic bird lays its eggs in the nest of its host and lets the host incubate them.
During the course of evolution, the eggs of the parasitic bird have evolved to resemble the host s egg in size and colour to reduce the chances of the host bird detecting the foreign eggs and ejecting them from the nest.
For example, the cuckoo bird lays eggs in crow s nest.
4. Predation: Capturing, killing and eating of an organism called prey by another organism called, predator is called predation. Example: Deer eaten by lion.
Significance and effect of predation:
- Predation leads to transfer of energy across trophic levels.
- They keep prey populations under control. However, when certain exotic species are introduced into a geographical area, they become invasive and start spreading fast because the invaded land does not have its natural predators. For example, the prickly pear cactus introduced into Australia in the early 1920 s caused havoc by spreading rapidly into millions of hectares of rangeland. Finally, the invasive cactus was brought under control only after a cactus-feeding predator (a moth) from its natural habitat was introduced into the country.
- Biological control methods adopted in agricultural pest control are based on the ability of the predators to regulate prey population.
- Predators also help in maintaining species diversity in a community, by reducing the intensity of competition among competing prey species. For example, in the rocky intertidal communities of the American Pacific Coast, the starfish Pisaster is an important predator.
- In a field experiment, when all the starfish were removed from an enclosed intertidal area, more than 10 species of invertebrates became extinct within a year, because of interspecific competition.
- If a predator is too efficient and overexploits its prey, then the prey might become extinct and following it, the predator will also become extinct due to lack of food. This is the reason why predators in nature are prudent (far sighted).
- Prey species also have evolved various defences to lessen the impact of predation as described:
Camouflage: Some species of insects and frogs are cryptically-coloured to avoid being detected easily by the predator.
Poisonous prey: Some are poisonous and therefore avoided by the predators. For example: The Monarch butterfly is highly distasteful to its predator (bird) because of a special chemical present in its body. Interestingly, the butterfly acquires this chemical during its caterpillar stage by feeding on a poisonous weed.
Phytophagous plant predators: Nearly 25 per cent of all insects are known to be phytophagous (feeding on plant sap and other parts of plants).
For example,
- Thorns of Acacia and Cactus are the most common morphological means of defence.
- Many plants produce and store chemicals that make the herbivore sick when they are eaten, inhibit feeding or digestion, disrupt its reproduction or even kill it like, the weed Calotropis growing in abandoned fields. The plant produces highly poisonous cardiac glycosides and that is why cattle or goats do not graze on this plant.
| Note box: Predators have been used for biological control of pests and weeds. For example, the weed, Opuntia in Australia was controlled by cactoblastis. |
Questions for section 13.2:
1. Explain the terms:
a) Local population
b) Metapopulation
c) Population ecology
d) Population attributes
e) Natality
f) Biotic potential
g) Realized natality
h) Mortality
i) Sex ratio
2. What is age pyramid? What are its types?
3. Define population density. List its features.
4. Define:
a) Population growth
b) Immigration
c) Emigration
5. Write a note on the two types of growth models.
6. Write a note on population interaction.
7. List the different types of positive interactions.
8. Explain commensalism and its types.
9. List different types of negative interactions. Explain Amenalism and its types.
10. What is parasitism? What are the different types of parasites?
11. What is Brood parasitism?
12. What is predation?
13. Explain with 2 examples, mechanisms of predation seen in different organisms.



