Hello

Chapter 13 – Kinetic theory of Gases – 11th Physics

28–42 minutes

13.0 Preview:

As the name suggests, this chapter is all about the Kinetic theory of gases, based on the molecular composition of gases which offers explanation for behaviour of gases. We will see how different physicists came up with interesting theories to explain the atomic nature of gases—starting from the atomic hypothesis put forward by Richard Feynman which states that, “All things are made of atoms – little particles that move around in perpetual (endless) motion, attracting each other when they are a little distance apart, but repelling, upon being squeezed into one another”.

Further, John Dalton suggested two theories to account for the mass of the particles: The first law says that, “any given compound has a fixed proportion by mass of its constituents”. The second law says that, “when two elements form more than one compound, for a fixed mass of one element, the masses of the other elements are in ratio of small integers”; Gay Lussac’s law states that, “When gases combine chemically to yield another gas, their volumes are in the ratios of small integers”; Avogadro’s law (or hypothesis) says: “Equal volumes of all gases at equal temperature and pressure have the same number of molecules”.

We shall study that, gases are actually in dynamic equilibrium although they appear static. Hence, we can infer that molecules collide and change their speeds during the collision.

Then, we will see how real gases approach ideal states as we vary the pressure and temperature of the system and we will find that all pressure – volume curves approach the ideal gas curve for low pressures and high temperatures.

Dalton’s law of partial pressures will then be dealt with. Partial pressure is that pressure exerted by one of the gases in a system if no other gases were present.

By making certain assumptions to establish ideal conditions for a gas, we will study the kinetic theory of ideal gases and thus derive an expression for pressure exerted by an ideal gas.

  • We shall establish the proof for kinetic theory, which we will call as kinetic interpretation—we shall prove that the average kinetic energy of a molecule is proportional to the absolute temperature of the gas and independent of pressure, volume or the nature of the ideal gas.
  • We shall briefly discuss Maxwell distribution; thus, establish a complex function to find the most probable distribution of speeds in a gas, containing N molecules which is itself called Maxwell Distribution.
  • We will define Law of equipartition of energy which states that, “for any dynamical system in equilibrium, the total energy is distributed equally amongst all the degrees of freedom”. We will extend the law to establish equations for specific heat capacities of monoatomic, diatomic, triatomic and polyatomic gases. As an extrapolation, we will also find the specific heat capacities of solids and water.
  • Finally, the concept of mean free path shall be covered. Mean free path is the average distance between two successive collisions in an enclosed system of gases.

13.1 Introduction

Boyle, Newton and several others tried to explain the behaviour of gases by considering that gases are made up of tiny atomic particles. Kinetic theory explains the behaviour of gases based on the idea that, the gas consists of rapidly moving atoms or molecules. The rapid movement is can be attributed to the inter-atomic forces, which are short range forces (that are important for solids and liquids) and can be neglected for gases.

The kinetic theory was developed in the nineteenth century by Maxwell, Boltzmann and others. It gives a molecular interpretation of pressure and temperature of a gas. It correctly explains specific heat capacities of many gases. It also relates measurable properties of gases such as viscosity, conduction and diffusion with molecular parameters, from which molecular size and mass can be determined. This chapter gives an introduction to kinetic theory.

13.2 Molecular Nature of Matter

Introduction to different atomic theories:

Richard Feynman, one of the great physicists of 20th century considers the discovery that “Matter is made up of atoms” to be a very significant one. Feynman would like the ‘Atomic Hypothesis’ to be communicated to the next generation in the universe, if scientific knowledge were to be destroyed. It was stated as below:

Atomic Hypothesis:

Definition box:
Atomic hypothesis states that, “All things are made of atoms – little particles that move around in perpetual (endless) motion, attracting each other when they are a little distance apart, but repelling, upon being squeezed into one another”.

Speculation that matter may not be continuous but is constituted of particles existed in many places and cultures.

  • Kanada in India and Democritus in Greece had suggested that matter may consist of indivisible constituents.
  • The scientific ‘Atomic Theory’ is credited to John Dalton. He proposed the atomic theory to explain the laws of definite and multiple proportions obeyed by elements when they combine into compounds as stated below,

The first law says that, “any given compound has a fixed proportion by mass of its constituents”.

The second law says that, “when two elements form more than one compound, for a fixed mass of one element, the masses of the other elements are in ratio of small integers”.

To explain the laws, Dalton suggested that, the smallest constituents of an element are atoms. Atoms of one element are identical but differ from those of other elements. A small number of atoms of each element combine to form a molecule of the compound.

  • Gay Lussac’s law states that, “When gases combine chemically to yield another gas, their volumes are in the ratios of small integers”.
  • Avogadro’s law (or hypothesis) says: “Equal volumes of all gases at equal temperature and pressure have the same number of molecules”.
Note box:
1. Since the elements are often in the form of molecules, Dalton’s atomic theory can also be referred to as the molecular theory of matter.
2. Electron microscopes and scanning tunnelling microscopes enable us to even see atoms and molecules.
3. The size of an atom is about an angstrom (10 -10 m). In solids, which are tightly packed, atoms are spaced about a few angstroms (2 Å) apart.
4. In liquids, the separation between atoms is also about the same. In liquids, the atoms are not as rigidly fixed as in solids, and can move around. This enables a liquid to flow.
5. In gases, the interatomic distances are in tens of angstroms.
  • In solids and liquids, the inter-atomic force is such that, it has a long-range attraction and a short-range repulsion. In other words, the atoms attract when they are at a few angstroms but repel when they come closer.

Dynamic equilibrium in gases

  • The static appearance of a gas is misleading.
  • The gas is full of activity and the equilibrium is a dynamic one. In dynamic equilibrium, molecules collide and change their speeds during the collision. Note box:
Note box:    
1. Only the average atomic properties (like atomic number, mass, etc) remain constant during collision.     

2. An atom consists of a nucleus and electrons. The nucleus itself is made up of protons and neutrons. The protons and neutrons are again made up of quarks.
Story box:
Atomic Hypothesis in Ancient India and Greece
Though John Dalton is credited with the introduction of atomic view point in modern science, scholars in ancient India and Greece proposed, long before the existence of atoms and molecules. In the Vaiseshika school of thought in India founded by Kanada, the atomic picture was developed in considerable detail. Atoms were thought as being eternal, indivisible, infinitesimal and ultimate parts of matter.  

It was argued that if matter could be subdivided without an end, there would be no difference between a mustard seed and the Meru mountain. The four kinds of atoms (Paramanu — Sanskrit word for the smallest particle) postulated were: Bhoomi (Earth), Ap (water), Tejas (fire) and Vayu (air) that have characteristic mass and other attributes, were put forward. Akasa (space) was thought to have no atomic structure and was continuous and inert.  

Atoms combine to form different molecules (e.g. two atoms combine to form a diatomic molecule dvyanuka, three atoms form a tryanuka or a triatomic molecule), their properties depending upon the nature and ratio of the constituent atoms. The estimates vary.

In Lalitavistara, a famous biography of the Buddha written mainly in the second century B.C., the estimate is close to the modern estimate of atomic size, of the order of $10^{–10}$ m. In ancient Greece, Democritus (Fourth century B.C.) is best known for his atomic hypothesis. The word, ‘atom’ means ‘indivisible’ in Greek. According to him, atoms differ from each other physically, in shape, size and other properties and this resulted in the different properties of the substances formed by their combination.

Questions for section 13.2:

  1. State Richard Feynman’s Atomic hypothesis.
  2. State John Dalton’s laws for definite and mixed proportions.
  3. State Gay Lussac’s law.
  4. State Avogadro’s law.
  5. What is dynamic equilibrium?

13.3 Behaviour of Gases

  • In a gas, molecules are far from each other and their mutual interactive forces are negligible (except when two molecules collide).
  • Gases at low pressure and high temperature but above that, at which they liquefy (or solidify) satisfy a simple relation between their pressure, temperature and volume given by the following equation,
    PV = KT ………………………………… (13.1)
    Here, T is the temperature in kelvin or (absolute) scale. K is a constant for the given sample but varies with the volume of the gas.

Note box:
K is proportional to the number of molecules, (say) N in the sample. We can write K = N k.
  • “k” is found to be same for all gases. It is called Boltzmann constant and is denoted by “$k_B$” and is related as below;
    $$ As \frac {P_1V_1}{N_1T_1}- \frac {P_2V_2}{N_2T_2}=constant=k_B …..(13.2) $$
Note box:
If P, V and T are same for gases under comparison, then, N is also same for these gases.

Some insight on Avogadro’s hypothesis:

  • This is Avogadro’s hypothesis as discussed earlier and can also be stated as: “The number of molecules per unit volume is same for all gases at a fixed temperature and pressure”.
  • The number of molecules in 22.4 litres of any gas is $ 6.02 × 10^{23}$; this is known as Avogadro number and is denoted by, $N_A$.
  • The mass of 22.4 litres of any gas is equal to its molecular weight in grams at Standard temperature and pressure (S.T.P) of 273 K and 1 atm respectively. This amount of substance is called a mole.

Behaviour of gases as governed by different laws:

  • The perfect gas equation can be written as
    PV = μ RT ……………………….. (13.3)
    Where, μ is the number of moles and $R = N_Ak_B$ is a universal constant. The temperature T is absolute temperature.
  • Choosing kelvin scale for absolute temperature, R = 8.314 J $mol^{–1} \space K^{–1}$.
    Here,
    $$ \frac {M}{M_o} = \frac {N}{N_A} …….(13.4)$$
    Where, M is the mass of the gas containing N molecules, $M_0$ is the molar mass and $N_A$ the Avogadro’s number.
  • Using Equation, (13.4); equation (13.3) can also be written as:
    From equation 13.3 , PV = μ RT
    w.k.t $k_B = \frac {R}{N_A} \implies R=N_Ak_B $
    Substituting in above equation we get,
    $$PV= μk_BN_AT$$
    But, $ μ= \frac {N}{N_A} $
    $$ \implies PV = \frac {N}{N_A}k_BN_AT $$
    $$ \therefore PV = Nk_B T $$
    $$PV = Nk_BT \space (or) \space P = k_BnT $$
    Where, n is the number density, that is, number of molecules per unit volume. $k_B$ is the Boltzmann constant (Value of $K_B$ in SI units is 1.38 × 10$^{–23}$ J $K^{–1}$) as introduced above.
    Another useful form of Eq. (13.3) is, $$ P = \rho \frac {RT}{M_o} $$
    Derived as,
    PV = μ RT
    substitute for $ μ = \frac {N}{N_A} $
    $$PV= \frac {N}{N_A}RT $$
    w.k.t $ \frac {M}{M_o} = \frac {N}{N_A} …….(13.4)$
    Hence $P = \frac {M}{M_o} RT$
    Now, $P = \frac {MRT}{VM_o} $
    $$ \therefore P = \rho \frac {RT}{M_o} $$
    Where, ρ is the mass density of the gas.
  • A gas that satisfies Equation: PV = μ RT (equation 13.3) exactly at all pressures and temperatures is defined to be an ideal gas. An ideal gas is a simple theoretical model of a gas. No real gas is truly ideal.

Figure 13.1 Real gases approach ideal gas behaviour at low pressures and high temperatures.

Observations:

  1. We can see that, all curves approach the ideal gas behaviour for low pressures and high temperatures.
  2. At low pressures or high temperatures the molecules are far apart and molecular interactions are negligible. Had there been no interactions, the gas behaves like an ideal one.
  • If we fix μ and T in Equation (13.3), we get,
    PV = constant …………….. (13.6)
    That is, keeping temperature constant, pressure of a given mass of gas varies inversely as the volume. This is the famous Boyle’s law as we know!

Figure 13.2 Experimental P-V curves (solid lines) for steam at three temperatures compared with Boyle’s law (dotted lines). P is in units of 22 atm and V in units of 0.09 litres.

Observation:

Once again, we see that, gases behave as ideal gas and obey Boyle’s law at high temperatures and low pressures.

  • Next, if we fix P, Equation (13.1): PV = KT shows that V ∝ T. That is, for a fixed pressure, the volume of a gas is proportional to its absolute temperature T (Charles’ law). Refer Figure 13.3.

Figure 13.3 Experimental T-V curves (solid lines) for $CO_2$ at three pressures compared with Charles’ law (dotted lines). T is in units of 300 K and V in units of 0.13 litres.

  • Finally, let us consider a mixture of non-interacting ideal gases:
    $μ_1$ moles of gas 1, $μ_2$ moles of gas 2 and so on (for gases 3, 4, 5…) in a vessel of volume V at temperature T and pressure P. It is then found that, the equation of state of the mixture is:

$$ PV =( μ_1+ μ_2+…..)RT ……….(13.7)$$
$$ P = μ_1 \frac {RT}{V}+μ_2 \frac {RT}{V} +…..(13.8)$$
$$ = P_1+P_2+……(13.9)$$

  • Clearly, $P_1 = μ_1 R T/V$ is the pressure gas 1 would exert at the same conditions of volume and temperature if no other gases were present. This is called the partial pressure of the gas.
  • Thus, the total pressure of a mixture of ideal gases is the sum of partial pressures.
  • This is Dalton’s law of partial pressures.

We shall now deal with examples of volume occupied by gas molecules and that occupied by a single molecule;

Example 13.1: The density of water is 1000kg m$^{–3}$. The density of water vapour at 100 °C and 1 atm pressure is 0.6 kg m$^{–3}$. The volume of a molecule multiplied by the total number gives, what is called, molecular volume. Estimate the ratio (or fraction) of the molecular volume to the total volume occupied by the water vapour under the above conditions of temperature and pressure.

Solution: For a given mass of water molecules, the density is less if volume is large. So the volume of the vapour is 1000/0.6 = /(6 ×10 $^{-4}$ ) times larger. If densities of bulk water and water molecules are same, then the fraction of molecular volume to the total volume in liquid state is 1. As volume in vapour state has increased, the fractional volume is less by the same amount, i.e. 6×10$^{-4}$.

Example 13.2: Estimate the volume of a water molecule using the data in Example 13.1
Solution: In the liquid (or solid) phase, the molecules of water are quite closely packed. The density of water molecule may therefore, be regarded as roughly equal to the density of bulk water = 1000 kg m$^{–3}$. To estimate the volume of a water molecule, we need to know the mass of a single water molecule. We know that 1 mole of water has a mass approximately equal to
$$(2 + 16)\space g = 18\space g = 0.018 \space kg$$.
Since 1 mole contains about 6 × 10$^{23}$ molecules (Avogadro’s number), the mass of a molecule of water is (0.018)/(6 × 10$^{23}$) kg = 3 × 10$^{–26}$ kg. Therefore, a rough estimate of the volume of a water molecule is as follows:
Volume of a water molecule
$$ = (3 × 10^{–26} \space kg)/ (1000 \space kg \space m^{–3})$$
$$= 3 × 10^{–29} \space m^3$$
$$= (4/3) π (Radius)^3 $$
Hence, Radius ≈ 2 ×10-10 m = 2 Å

Example13.3: What is the average distance between atoms (interatomic distance) in water? Use the data given in Examples 13.1 and 13.2.

Solution: A given mass of water in vapour state has 1.67 × 10$^3$ times the volume of the same mass of water in liquid state (Ex. 13.1). This is also the increase in the amount of volume available for each molecule of water. When volume increases by $10^3$ times the radius increases by $V^{1/3}$ or 10 times, i.e., 10 × 2 Å = 20 Å. So the average distance is 2 × 20 = 40 Å.

Example 13.4: A vessel contains two nonreactive gases: neon (monatomic) and oxygen (diatomic). The ratio of their partial pressures is 3:2. Estimate the ratio of (i) number of molecules and (ii) mass density of neon and oxygen in the vessel. Atomic mass of Ne = 20.2 u, molecular mass of $O_2$ = 32.0 u.

Solution: Partial pressure of a gas in a mixture is the pressure it would have for the same volume and temperature if it alone occupied the vessel. (The total pressure of a mixture of non-reactive gases is the sum of partial pressures due to its constituent gases.) Each gas (assumed ideal) obeys the gas law. Since V and T are common to the two gases, we have $P_1V = μ_ 1 RT$ and $P_2V = μ_2 RT$, i.e. ($P_1/P_2$) = ($μ_1 / μ_2$). Here 1 and 2 refer to neon and oxygen respectively. Since ($P_1/P_2$) = (3/2) (given), ($μ_1/ μ_2$) = 3/2.
(i) By definition $μ_1 = (N_1/N_A$ ) and $μ_2 = (N_2/N_A$) where $N_1$ and $N_2$ are the number of molecules of 1 and 2, and $N_A$ is the Avogadro’s number. Therefore, ($N_1/N_2$) = ($μ_1 / μ-2$) = 3/2.
(ii) We can also write$ μ_1 = (m_1/M_1)$ and $μ_2 = (m_2/M_2$) where $m_1$ and $m_2$ are the masses of 1 and 2; and $M_1$ and$ M_2$ are their molecular masses. (Both $m_1$ and $M_1$; as well as $m_2$ and $M_2$ should be expressed in the same units). If $ρ_1$ and $ρ_2$ are the mass densities of 1 and 2 respectively, we have
$$ = \frac { \frac {m_1}{V_1}}{\frac {m_1}{V_2}}$$
$$ \frac {m_1}{m2} \space V_1 = V_2 $$
$$ = \frac {3}{2} \frac {20.2 u }{32.0 u }$$
$$ = 0.9468 $$

Questions for section:

  1. Give the expression which relates the pressure, temperature and volume of a gas at low pressure and high temperature.
  2. What is one mole of a substance?
  3. How is mass of gas containing N molecules related to its molar mass and Avogadro’s number?
  4. What is number density?
  5. Define ideal gas with the necessary relation.
  6. Explain with figures, the behaviour of a gas at low pressure and high temperature; when we fix temperature and when we fix pressure.
  7. Arrive at the expression for Dalton’s law of partial pressures.

13.4 Kinetic Theory of an Ideal Gas

Kinetic theory of gases is based on the molecular structure of matter.
The kinetic theory is based on a few assumptions listed below:

  • A given amount of gas is a collection of a large number of molecules that are continuously in random motion.
  • At ordinary pressure and temperature, the average distance between molecules is a factor of 10 or more than the typical size of a molecule (2 Å).
  • The interaction between the molecules is negligible and we can assume that they move freely in straight lines according to Newton’s first law.
  • However, occasionally, they come close to each other, experience intermolecular forces and their velocities change. These interactions are called collisions.
  • The molecules collide incessantly (continuously) against each other or with the walls and change their velocities. The average velocity can become zero but not their average speed.
  • All collisions between molecules among themselves or between molecules and the walls are elastic. This implies that, total kinetic energy is conserved. Thus, the total momentum is conserved as well.

13.4.1 Pressure of an Ideal Gas

  • Let us consider a gas enclosed in a cube of side, l.
  • Let us take the axes, x, y and z to be parallel to the edges of the cube, as shown in Figure, 13.4 below.
Figure 13.4 Elastic collision of a gas molecule with the wall of the container.
  • A molecule with velocity ($v_x, v_y, v_z$) hits the planar wall (parallel to y-z plane as shown in figure) and the wall is of area A (= $l^2$). Since the collision is elastic, the molecule rebounds with the same velocity (its y and z components of velocity do not change in the collision but the x-component reverses sign). Thus, the velocity after collision is (-$v_x, v_y, v_z$ ) .
  • The change in momentum of the molecule due to collision with the wall is: –$mv_x – (mv_x) = – 2mv_x$. By the principle of conservation of momentum, the momentum imparted to the wall in the collision = $2mv_x$.
  • To calculate the force (and pressure) on the wall, we need to calculate momentum imparted to the wall per unit time. In order to find this momentum, we need to find some other quantities as below;
  • In a small time interval Δt, a molecule with x-component of velocity vx will hit the wall if it is within the distance: “$v_xΔt$” from the wall. Thus, all molecules within the volume: A($v_xΔt$) only can hit the wall in this time interval.
  • But, on an average, half of these are moving towards the wall and the other half away from the wall. Thus, the number of molecules with velocity ($v_x, v_y, v_z$) hitting the wall in time Δt is: “½A $v_x$ Δt n” where n is the number of molecules per unit volume.
  • The total momentum transferred to the wall by these molecules in time Δt is:
    Q = (2mvx) (½ n A $v_x$ Δt ) ………………….. (13.10)
  • The force on the wall is the rate of momentum transfer: Q/Δt; and pressure is force per unit area:
    P = Q / (A Δt) = n m $v_x^2$ ……………………. (3.11)
Note box: All molecules in a gas do not have the same velocity; there is a distribution in velocities. The above equation therefore, stands for pressure due to the group of molecules with speed vx in the x-direction and n stands for the number density of that group of molecules.
  • The total pressure is obtained by summing over the contribution due to all groups as we will do below,
    $$ P = n \space m \space \bar { v_x^2 } ….. (13.12)$$
    where $ \bar { v_x^2 } $is the average of $v_x^2$.Now the gas is isotropic, i.e. there is no preferred direction of velocity of the molecules in the vessel.Therefore, by symmetry,
    $$ \bar {v_x^2} = \bar {v_y^2} = \bar {v_z^2} $$
    $$ =(1/3)[\bar {v_x^2} + \bar {v_y^2}+ \bar {v_z^2}]=(1/3) \bar {v^2} ….(13.13)$$
    where v is the speed and $ \bar {v^2}$ denotes the meanof the squared speed. Thus
    $$ P =(1/3)n \space m \space \bar {v^2} …..(13.14) $$

Inferences based on this derivation:

  1. Though we choose the container to be a cube, the shape of the vessel really is immaterial. For a vessel of arbitrary shape, we can always choose a small infinitesimal (planar) area and apply (or extend) this derivation; also because, A and Δt do not appear in the final result.
  2. By Pascal’s law, pressure in one portion of the gas in equilibrium is the same as anywhere else. 3. Second, though we have ignored any collisions in the derivation, it is found that it will not lead to erroneous results.
  3. The number of molecules hitting the wall in time, Δt was found to be “½ n A$v_x$ Δt”.
  4. Since the collisions are random and the gas is in a steady state, a molecule with velocity ($v_x, v_y, v_z$) acquires a different velocity due to collision with some molecule. There will always be some other molecule with a different initial velocity which after a collision acquires the velocity, ($v_x, v_y, v_z$). If this were not so, the distribution of velocities would not remain steady.
  5. In any case, we are finding the average mean square velocities of all molecules, $ \bar {v_x^2} $ .Thus, on the whole, molecular collisions (if they are not too frequent and the time spent in a collision is negligible compared to time between collisions) will not affect the calculation.
Story box:  
James Clerk Maxwell (1831 – 1879), born in Edinburgh, Scotland, was among the greatest physicists of the nineteenth century. He derived the thermal velocity distribution of molecules in a gas and was among the first to obtain reliable estimates of molecular parameters from measurable quantities like viscosity.

Maxwell’s greatest achievement was the unification of the laws of electricity and magnetism (discovered by Coulomb, Oersted, Ampere and Faraday) into a consistent set of equations now called Maxwell’s equations. From these, he arrived at the most important conclusion that light is an electromagnetic wave. Interestingly, Maxwell did not agree with the idea (strongly suggested by the Faraday’s laws of electrolysis) that electricity was particulate in nature.  

Ludwig Boltzmann (1844 – 1906) born in Vienna, Austria, worked on the kinetic theory of gases independently of Maxwell. A firm advocate of atomism that is basic to kinetic theory, Boltzmann provided a statistical interpretation of the Second Law of thermodynamics and the concept of entropy. He is regarded as one of the founders of classical statistical mechanics. The proportionality constant connecting energy and temperature in kinetic theory is known as Boltzmann’s constant in his honour.

13.4.2 Kinetic Interpretation of Temperature

Equation (13.14) can be written as,
$$ P =(1/3)n \space V \space m \space \bar {v^2} …..(13.15a) $$
$$ PV = (2/3) N \times ½ \space m v^2 ….. (13.15b)$$

where N (= nV) is the number of molecules in the sample.

The quantity in the bracket is the average translational kinetic energy of the molecules in the gas. Since the internal energy E of an ideal gas is purely kinetic*,

$$ E = N \times (1/2) m \space \bar {v^2} …. (13.16)$$

Equation (13.15) then gives:
PV = (2/3) E (13.17)
We are now ready for a kinetic interpretation of temperature. Combining Eq. (13.17) with the ideal gas Eq. (13.3), we get
$$E = (3/2) k_B \space NT …… (13.18)$$

$$\frac{E}{N} \;=\; \tfrac{1}{2} m \,\overline{v^{2}} \;=\; \tfrac{3}{2} k_B T \quad (13.19)$$

  • That is, the average kinetic energy of a molecule is proportional to the absolute temperature of the gas and independent of pressure, volume or the nature of the ideal gas.
  • The result obtained is a fundamental expression relating: temperature, a macroscopic measurable parameter of a gas to a molecular quantity, which is, the average kinetic energy of a molecule. The two quantities are connected by the Boltzmann constant as we see from the expression.
  • We note from Equation (13.18) that, internal energy of an ideal gas depends only on temperature, not on pressure or volume.
  • With this interpretation of temperature, we can say that, kinetic theory of an ideal gas is completely consistent with the ideal gas equation (and the various gas laws based on it).
  • For a mixture of non-reactive ideal gases, the total pressure gets contribution from each gas in the mixture. Equation (13.14) then becomes,

$$ P = (1/3) [n_1m_1 \bar {v_1^2} + n_2 m_2 2 \bar {v_2^2 }+… ] …….(13.20)$$
In equilibrium, the average kinetic energy of the molecules of different gases will be equal.
That is,
$$ 1/2 m_1 \bar {v_1^2} = 1/2 m_2 \bar {v^2_2} =(3/2) k_B T $$ so that
$$ P =(n_1+n_2+…..)k_BT ……(13.21)$$
which is Dalton’s law of partial pressures.From Eq. (13.19), we can get an idea of the
typical speed of molecules in a gas. At a temperature T = 300 K, the mean square speed
of a molecule in nitrogen gas is:
$$ m = \frac {M_{N_2}}{N_A} = \frac {28}{6.022 \times 10^{23} }=4.65 \times 10^{-23}kg $$
$$ \bar {v^2}=3 \space k_B T/m $$
Now, $ k_B = \frac {R}{N_A}=1.38 \times 10^{-23} J/K $
$$ = \frac {3 \times 1.38 \times 10^{-23} \times 300 }{4.65 \times 10^{-23}} $$
$$ \bar {v^2} = 3 \space k_B \space T / m = (516)^2 \space m^2s^{-2} $$
The square root of $ \bar {v^2}$ is known as root mean square (rms) speed and is denoted by $v_{rms}$,( We can also write $ \bar {v^2}$ as < $v^2$ >.)
$$ v_{rms} = 516 \space m \space s^{-1} $$
The speed is of the order of the speed of sound in air. It follows from Eq. (13.19) that at the same temperature, lighter molecules have greater rms speed.

Example 13.5: A flask contains argon and chlorine in the ratio of 2:1 by mass. The temperature of the mixture is 27 °C. Obtain the ratio of (i) average kinetic energy per molecule, and (ii) root mean square speed $v_{rms}$ of the molecules of the two gases. Atomic mass of argon = 39.9 u; Molecular mass of chlorine = 70.9 u

Solution: The important point to remember is that the average kinetic energy (per molecule) of any (ideal) gas (be it monatomic like argon, diatomic like chlorine or polyatomic) is always equal to (3/2) $k_B$T. It depends only on temperature, and is independent of the nature of the gas.
(i) Since argon and chlorine both have the same temperature in the flask, the ratio of average kinetic energy (per molecule) of the two gases is 1:1.
(ii) Now$ ½ \space m\space v_{rms }^2$ = average kinetic energy per molecule = (3/2) ) $k_B$T where m is the mass of a molecule of the gas.

Maxwell Distribution Function

  • The molecules in a gas are assumed to be in random motion which means that many molecules have speeds other than average speed and others have speeds greater than the average.
  • James Maxwell in 1852 derived a formula for finding the most probable distribution of speeds in a gas, containing N molecules.
  • If dN represents the number of molecules with speeds between v and v+dv, then,
    $$ dN(v) = 4p \space N \space a^3 \space e^{-bv^2}v^2dv=n_v dv $$
    This is known as Maxwell Distribution.
Figure 13.5
  • The plot of $n_v$ against v is shown in the figure.
  • It is found that, the fraction of the number of molecules with speeds, v and v+dv is equal to the area of the strip shown.
  • The average value of $v^2$ for all molecules is defined by the integral <$v^2$> = (1/N ) ∫ $v^2$ dN(v) = Å(3$k_B$T/m).
  • At any temperature, the height of the curve for any value of v is proportional to the number of molecules with speeds near, v.
  • The peak of the curve represents the most probable speed for a given temperature (we obtain different curves for different temperatures as you may have expected).
  • As the peak increases, the average molecular kinetic energy increases.

Example 13.6: Uranium has two isotopes of masses 235 and 238 units. If both are present in Uranium hexafluoride gas which would have the larger average speed? If atomic mass of fluorine is 19 units, estimate the percentage difference in speeds at any temperature.

Solution:

At a fixed temperature the average energy = $ m < v^2 > $ is constant. So smaller the
mass of the molecule, faster will be the speed.
The ratio of speeds is inversely proportional to the square root of the ratio of the masses. The masses are 349 and 352 units. So
$$ v_{349}/v_{352} = (352/349)^{1/2} = 1.0044 $$
Hence difference $ \frac {V}{V} = 0.44 % $
$^{235}U$ is the isotope needed for nuclear fission. To separate it from the more abundant isotope

$ ^{238}$, the mixture is surrounded by a porous cylinder. The porous cylinder must be thick and narrow, so that the molecule wanders through individually, colliding with the walls of the long pore. The faster molecule will leak out more than the slower one and so there is more of the lighter molecule (enrichment) outside the porous cylinder (below figure). The method is not very efficient and has to be repeated several times for sufficient enrichment.

Example 13.7 (a) When a molecule (or an elastic ball) hits a ( massive) wall, it rebounds with the same speed. When a ball hits a massive bat held firmly, the same thing happens. However, when the bat is moving towards the ball, the ball rebounds with a different speed. Does the ball move faster or slower? (Ch.6 will refresh your memory on elastic collisions.)
(b) When gas in a cylinder is compressed by pushing in a piston, its temperature rises. Guess at an explanation of this in terms of kinetic theory using (a) above. (c) What happens when a compressed gas pushes a piston out and expands. What would you observe?
(d) Sachin Tendulkar uses a heavy cricket bat while playing. Does it help him in anyway?

Solution: (a) Let the speed of the ball be u relative to the wicket behind the bat. If the bat is moving towards the ball with a speed V relative to the wicket, then the relative speed of the ball to bat is V + u towards the bat. When the ball rebounds (after hitting the massive bat) its speed, relative to bat, is V + u moving away from the bat. So relative to the wicket the speed of the rebounding ball is V + (V + u) = 2V + u, moving away from the wicket. So the ball speeds up after the collision with the bat. The rebound speed will be less than u if the bat is not massive. For a molecule this would imply an increase in temperature.
You should be able to answer (b) (c) and (d) based on the answer to (a).
(Hint: Note the correspondence, piston􀃆 bat, cylinder → wicket, molecule → ball.)

Questions for section 13.4

  1. State the assumptions made in kinetic theory of an ideal gas.
  2. Arrive at the expression for total pressure of an ideal gas.
  3. State the inferences and limitations as a consequence of the expression obtained for pressure exerted by an ideal gas.
  4. Arrive at the expression for kinetic interpretation of temperature, in the form: E/ N = ½ m $v^2$ = (3/2) $k_B$T.
  5. Explain Maxwell’s Distribution function with a relevant figure.

13.5 Law of Equipartition of Energy

Statement: For any dynamical system in equilibrium, the total energy is distributed equally amongst all the degrees of freedom. The average energy of a molecule in the system associated with each degree of freedom is (½) $K_B$T, where $K_B$ is Boltzmann’s constant and T is the absolute temperature of the system.

Explanation:
The average kinetic energy of a gas molecule is

$$ \frac {1}{2}mv^2= \frac {3}{2}k_BT \hspace{10mm} i.e., \frac {1}{2}m(v^2_x+v^2_y+v^2_z)=\frac {3}{2} k_B T $$

$$ \therefore \frac {1}{2} mv^2_x+ \frac {1}{2}mv^2_y+\frac {1}{2}mv^2_z= \frac {3}{2}k_BT $$

Since the average kinetic energy of the molecule along each of the three axis is the same,$ \frac {1}{2}mv^2_x=\frac {1}{2}mv^2_y=\frac {1}{2}mv^2_z=\frac {1}{2}k_BT $.That means ,energy per degree of freedom of the molecule is $\frac {1}{2}k_BT $.

Since a monoatomic molecule has three degrees of freedom , its kinetic energy is $ \frac {3}{2}k_BT $.A diatomic molecule has five degree of freedom and its kinetic energy is $ \frac {5}{2}k_BT $.A non linear triatomic molecule has six degree of freedom and its kinetic energy is is $ \frac {6}{2}k_BT $ or $3k_BT$.

Specific Heat Capacity of Gases

In an ideal gas, the total energy of the gas or internal energy U of the gas is equal to the total kinetic energy of all the molecules in the gas. For one mole of a monoatomic gas, the total energy is $ U = \frac {3}{2}N_Ak_BT=\frac {3}{2}RT$, where $N_A$ is the Avogadro number and R is the gas constant. The specific heat at constant volume for a monoatomic gas is $ C_v= \frac {dU}{dT}=\frac {d}{dT} \bigg( \frac {3}{2} RT\bigg) = \frac {3}{2} R $

Since $C_p-C_v=R$ , the specific heat at constant pressure is $C_p=C_v+R=\frac {3}{2}R+R=\frac {5}{2} R $

The ratio of the specific heat at constant pressure to that at constant volume is
$$ γ = \frac {C_p}{C_v} = \frac { \big(5/2 R)}{3/2 R)} = \frac {5}{3} =1.67 $$

For one mole of a diatomic gas, the total energy is $ U = \frac {5}{2}N_Ak_BT=\frac {5}{2}RT$. The specific heat at constant volume is $ C_v= \frac {dU}{dT}=\frac {5}{2}R $.
The specific heat at constant pressure is $C_p=C_v+R=\frac {5}{2}R+R = \frac {7}{2} R $
The ratio of the two specific heats is $ γ = \frac {C_p}{C_v}=\frac {(7/2R)}{(5/2R)}=\frac {7}{5}=1.4 $

For one mole of a non-linear triatomic gas, total energy is $ U = 3N_Ak_BT=3 \space RT$.
The specific heat at constant volume is $C_v = \frac {dU}{dT}=3R$.The specific heat at constant pressure is $C_p=C_v+R=3R+R=4R$.

The ratio of the two specific hears of the gas is $ γ = \frac {C_p}{C_v}=\frac {4R}{3R}=\frac {4}{3}=1.33 $

For polyatomic gases, $C_v =(3+f)R,C_p=(4+f)R \space and \space γ = \frac {(4+f)}{(3+f)} $ where f is the number of vibrational modes.

Example 13.8 A cylinder of fixed capacity 44.8 litres contains helium gas at standard
temperature and pressure. What is the amount of heat needed to raise the temperature of the gas in the cylinder by 15.0 °C? (R = 8.31 J $mo1^{–1} K^{–1}$).

Solution: Using the gas law PV = μRT, you can easily show that 1 mol of any (ideal) gas at standard temperature (273 K) and pressure (1 atm = 1.01 105 Pa) occupies a volume of 22.4 litres. This universal volume is called molar volume. Thus the cylinder in this example contains 2 mol of helium. Further, since helium is monatomic, its predicted (and observed) molar specific heat at constant volume, $C_v$ = (3/2) R, and molar specific heat at constant pressure, $C_p$ = (3/2) R + R = (5/2) R. Since the volume of the cylinder is fixed, the heat required is determined by $C_v$. Therefore, Heat required = no. of moles molar specific heat rise in temperature.
$$ = 2 \times 1.5R \times 15 =45 R $$
$$ = 45 \times 8.31 = 374 \space J$$

13.6.4 Specific Heat Capacity of Solids

  • To determine the specific heat of solids, we can use the law of equipartition of energy.
  • Let us consider a solid of N atoms, each vibrating about its mean position.
  • Since a vibrational mode has both kinetic and potential energy, an oscillation in one dimension has average energy of 2 × ½ $k_BT = k_BT$
  • In three dimensions, average energy = 3$K_B$T
  • For a mole of solid, N = $N_¬$A
  • Hence, total energy = U = (3$K_B$T) $N_¬$A= 3RT
  • At constant pressure, ΔQ=ΔU (since, ΔV=0)
  • Hence, C = ΔQ/ ΔT = ΔU/ ΔT = 3RT / T = 3R

We can tell from Table 13.3 that the prediction generally agrees with experimental values at ordinary temperature (Carbon is an exception).

13.6.5 Specific Heat Capacity of Water

  • Water is also treated as a solid. For each atom, average energy is $3K_BT$.
  • As water molecule has three atoms, two hydrogen and one oxygen,
    U = 3 × 3 $k_B$T × NA = 9 RT
    And, C = ΔQ/ ΔT
    = Δ U / ΔT = 9R
Note box:
Specific heat of all substances approach zero as T 0 because, the degrees of freedom get frozen at low temperature.
Fact box:
Quantum mechanics requires a minimum, nonzero amount of energy before a degree of freedom comes into play. This is also the reason why vibrational degrees of freedom come into play only in some cases.

Questions from sections, 13.5 and 13.6:

  1. State the law of equipartition of energy and explain, with relevant equations.
  2. Arrive at the expression for specific heat capacity for a monoatomic gas.
  3. Arrive at the expression for specific heat capacity for a diatomic gas.
  4. Arrive at the expression for specific heat capacity for triatomic and polyatomic gases.
  5. Arrive at the expression for specific heat capacity for a solid.
  6. Arrive at the expression for specific heat capacity for water.

13.7 Mean Free Path

The average distance, a molecule can travel without colliding is called the mean free path. The mean free path, in gases, is of the order of thousands of angstroms.

  • Thus, the atoms are much freer in gases and can travel long distances without colliding. If they are not enclosed, gas molecules disperse away in air.
  • The molecules of a gas do not collide with each other because they are point masses. However, as the real gas molecules are rigid spheres (not point masses), they collide with each other.
Definition box:
The average distance between two successive collisions is called the mean free path.

Expression for mean free path

  • Let us consider a gas made up of molecules which are assumed to be hard spheres of diameter, d.
  • A collision takes place between two molecules when the centres of the molecules are at a separation of d as shown in figure 13.7.
Figure 13.6 The volume swept by a molecule in time Δt in which any molecule will collide with it.
  • In time Δt, it sweeps a volume “π$d^2$vΔt” as it collides with other molecules (in the same specified volume).
  • If n is the number of molecules per unit volume, the molecule suffers “n(π$d^2$)vΔt” collisions in time Δt.
  • Thus, the rate of collisions is nπ$d^2$v or the time between two successive collisions is on the average,
    τ = 1/ (nπ v $d^2$) …………………… (13.38)
  • The average distance between two successive collisions, called the mean free path l, is:
    l = v τ = 1/ (nπ$d^2$) ………………….. (13.39)
  • In this derivation, we imagined the other molecules to be at rest. But actually, all molecules are moving and the collision rate is determined by the average relative velocity of all the molecules. Thus, we need to replace “v” by “$v_r$” in Equation (13.38). This gives us, a more accurate value for mean free path as:
    $$ l = \frac {1}{\sqrt {2} \pi d^2 n} …..(13.40)$$
Note box:
As expected, the mean free path given by $ l = \frac {1}{\sqrt {2} \pi d^2 n} ${Equation (13.40)} depends inversely on the number density and the size of the molecules. In a highly evacuated tube, n is rather small and the mean free path can be as large as the length of the tube!

Questions for section 13.7:

  1. What is mean free path?
  2. Define mean free path and obtain an expression for “n” molecules undergoing collision. Also give the expression for mean free path for all molecules in motion.