Hello

Chapter 10 – Wave Optics – 12th Physics

35–52 minutes

10.0 Preview:

In this chapter, we shall study the wave nature of light and explain concepts like: interference, diffraction and polarization of light waves.
We shall begin with Huygen’s principle which states that each point of the wave front is the source of a secondary disturbance and the wavelets emanating from these points spread out in all directions with the speed of the wave. Along the Huygen’s principle, we shall describe the phenomenon of refraction and reflection which occurs at different interfaces.

Next, we will study an important concept called Doppler Effect as the apparent change in frequency of light when the source moves away from the observer and vice versa. Further, we will study about Coherent and Incoherent waves based on the source of emission of light. Then, we will obtain an expression for Principle of superposition of waves. Consequently, we will study the two types of interference of these waves: Constructive interference and Destructive interference. We will describe a significant experiment conducted by Thomas Young to demonstrate the interference of light called, Young’s experiment.

Then, we will look at another important phenomenon called, Diffraction as the bending of waves at the edges of a small obstacle.
We will then study about the resolving power of a microscope. Resolving power of the microscope is given by the reciprocal of the minimum separation of two points to be seen as distinct.

Then, we shall describe Polarisation as the Restriction of vibrations of light waves on a plane. We will study Polarization by scattering and by reflection in some detail. In this context, we will learn about polarized, partially polarized and un-polarized light.

10.1 Introduction

In the physical optics, light is considered as a wave. With the use of Huygen’s wave principle, the principle of superposition, the phenomenon of interference and diffraction are explained and the electromagnetic wave nature of light is used to explain the concept of polarization.
Major developments in the field of wave optics

  • In 1637, Descrates gave the corpuscular model of light which explains the law of reflection and refraction of light at an interface which helped in the derivation of Snell’s law.
  • In 1678, Christian Huygen put forward the way theory of light.
  • Focault in 1850 by his rotating mirror experiment proved that speed of light in water is less than that in air.
  • In 1801 Thomas Young performed the interference experiment and established that light is indeed a wave phenomenon.
  • After this, any experiments were carried out which involved interference and diffraction of light waves. But the major difficulty for this theory was that a wave medium was required for the propogation.
  • In 1855, Maxwell predicted the existence of electromagnetic waves. From the wave equation, he calculated the speed of electromagnetic waves in free space and these calculated values were very close to the measured values of speed of light.

According to the Maxwell’s research, light waves were associated with changing electric and magnetic fields which produces a time and space varying magnetic field which in turn produces a changing electric field. This results in the propagation of the electromagnetic waves even in vacuum.

A ray of light is defined by the path of energy propagation in the limit of wavelength tending to zero.

Questions for section 10.1

  1. Explain briefly the major developments in the field of wave optics.
  2. Explain the contribution of Maxwell in the field of wave optics.

10.2 Huygen’s principle

Definition box
Wave front: It is the locus of all points which are at same state of vibration.
Secondary waves: it is the locus of all points which are at same state of vibration on the secondary wavelets.
Spherical wave front: if the points are in same state of vibration and lie in the same sphere then it is called spherical wave front.
Cylindrical wave front: if the points are in same state of vibration and lie in the same cylindrical surface then it is called cylindrical wave front.
Plane wave front: if the points are in same state of vibration and lie in the same plane then it is called plane wave front.
Note box
The speed of wave is that speed with which the wave front moves outwards from the source.
The energy of the wave travels in a direction perpendicular to the wave front.
Ray is a line which is drawn perpendicular to the wave front.

Huygens wave principle

According to Huygens principle, each point of the wave front is the source of a secondary disturbance and the wavelets emanating from these points spread out in all directions with the speed of the wave. These wavelets emanating from the wave front are usually referred to as secondary wavelets and if we draw a common tangent to all these spheres, we obtain the new position of the wave front at a later time.

To illustrate Huygens principle, let AB be a section of the given wavefront (called primary wavefront) at any instant, refer Fig 10.1 a shows a primary spherical wavefront AB and Fig 10.1b shows a primary plane wavefront AB. To find the position of a secondary wavefront after a time t, take points 1,2,3, 4… on the wavefront AB. The distance travelled by light in t sec = c × t, where c is the velocity of light in the medium. Taking each point as centre, draw sphere of radius = c × t. These spherical surfaces represent the position of secondary wavelets at time t. Draw a surface $A_1B_1$ touching tangentially, all the secondary wavelets in the forward direction. The surface $A_1B_1$ is the secondary wavefront. A surface $A_2B_2$ touching tangentially, all the secondary wavelets in the backward direction can also be drawn giving a backward secondary wavefront, but it is contrary to observation. Therefore, there is no backward flow of energy during propagation of wave.

In a homogenous isotropic medium, during the wave propagation, the radius of the spherical divergent wavefront increases uniformly with time and a wavefront is propagated parallel to itself.

Questions for section 10.2

1. Define the following terms

  • Wave front
  • Secondary waves
  • Spherical wave front
  • Cylindrical wave front
  • Plane wave front

2. Explain Huygens wave principle.

10.3 Refraction and reflection of plane waves using Huygens principle

10.3.1 Refraction of a plane wave

Fig 10.2

Laws of refraction are derived using Hyugens principle. Let PP’ represent the surface separating medium 1 and medium 2, as shown in figure. Let $v_1$ and $v_2$ represent the speed of light in medium 1 and medium 2, respectively. We assume a plane wave front AB propagating in the direction A1A incident on the interface at an angle i as shown in the figure. Let t be the time taken by the wave front to travel the distance BC. Thus, $BC = v_1τ $

In order to determine the shape of the refracted wave front, we draw a sphere of radius $v_2t$ from the point A in the second medium (the speed of the wave in the second medium is v2). Let CE represent a tangent plane drawn from the point C on to the sphere. Then, AE = $v_2$t and CE would represent the refracted wave front. If we now consider the triangles ABC and AEC, we obtain

$$ sin \space i = \frac {BC}{AC} = \frac { v_1τ}{AC}……(10.1)$$

and

$$ sin \space r = \frac {AE}{AC} = \frac { v_2τ}{AC}……(10.2)$$

where i and r are the angles of incidence and refraction, respectively.

Thus we obtain,
$$ \frac {sin \space i}{sin \space r} = \frac {v_1}{v_2} ….(10.3) $$

Then, copy all eqns from pg54 shastry

From the above equation we get the important result that if r< i (i.e, if the ray bends towards normal the speed of light wave in the second medium $(v_2)$ will be less then the speed of light wave in first medium $(v_1)$.this prediction is opposite to the prediction from the corpuscular model.The prediction of the wave theory is correct. If c represents the speed of light in vacuum then $ n_1 = \frac {c}{v_1}…(4) \space n_2 = – \frac {c}{v_2} …(5)$ are the refractive indices of medium (1) and (2) respectively in terms of the refractive indices , equation (3) can be written as $ n_1 \space sin \space I = n_2 \space sin \space r …(6) $ This is the Snell’s law of refraction.

If $λ_1$ and $ λ_2$ represent wavelengths of light in medium (1) and (2) respectively and if the distance BC equal to $λ_1$ and the distance AE will be equal to $ λ_2$ (because if the crest from B has reached C in time t, then the crest from A should have also reached E in time t ) $ \therefore \frac { λ_1}{ λ_2} =\frac {BC}{AE} = \frac {v_1}{v_2} \space or \space \frac {v_1}{ λ_1} = \frac {v_2}{ λ_2} $ The above equation implies that when a wave gets refracted into a denser medium $(v_1 > v_2)$ the wavelength and the speed of propagation decrease but the frequency n (= v/l) remains the same.

10.3.2 Refraction at a rarer medium

Fig 10.3

Let us consider refraction of a plane wave at rarer medium $(V_2 – V_1)$. AB being the incident wave front in the medium 1 and EC be the refracted wave front in medium 2 as shown in the figure. The angle of refraction will be greater than incidence since the relation

*** copy all eqns from pg54 shastry

$$ n_1 \space sin \space i = n_2 \space sin \space r \space is \space applicable.$$

If $i_c$ is the critical angle for which r = $90^o$ the eq(6) can be expressed as
$$ sin \space i_c = n_1/n_2 \hspace{10mm} \therefore If i=i_c \space and \space r=90^o \space then \space sin \space r =1 $$

For $i>i_c$ there can not be refracted wave.Here the angle $i_c$ is known as the critical angle.

Hence for all angles of incidence greater than the critical angle, there will be no refracted wave and the wave will undergo total internal reflection.

10.3.3 Reflection of a plane wave by a plane surface

Let us consider a plane wave AB incident at an angle i on a reflecting surface MN. If v represents the speed of the wave in the medium and if t represents the time taken by the wave front to advance from the point B to C then the distance
BC = vτ
In order the construct the reflected wave front we draw a sphere of radius vτ from the point A as shown in figure. Let CE represent the tangent plane drawn from the point C to this sphere. Obviously
AE = BC = vτ

Fig 10.4

If we now consider the triangles EAC and BAC we will find that they are congruent and therefore, the angles i and r would be equal. This is the law of reflection.

Let us consider a plane wave passing through a thin prism. Clearly, since the speed of light waves is less in glass, the lower portion of the incoming wave front will get delayed resulting in a tilt in the emerging wave front as shown in the figure, we consider a plane wave incident on a thin convex lens; the central part of the incident plane wave traverses the thickest portion of the lens and is delayed the most. The emerging wave front has a depression at the centre and therefore the wave front becomes spherical and converges to the point F which is known as the focus. In third figure a plane wave is incident on a concave mirror and on reflection we have a spherical wave converging to the focal point F. In a similar manner, we can understand refraction and reflection by concave lenses and convex mirrors.

Fig 10.5

Hence we can conclude that the total time taken from a point on the object to the corresponding point on the image is the same measured along any ray.

10.3.4 The Doppler Effect

When the source moves away from the observer the frequency as measured by the source will be smaller. This is known as the Doppler Effect. Astronomers call the increase in wavelength due to Doppler Effect as red shift since a wavelength in the middle of the visible region of the spectrum moves towards the red end of the spectrum. When waves are received from a source moving towards the observer, there is an apparent decrease in wavelength, this is referred to as blue shift.

For velocities small compared to the speed of light, we can use the same formulae which we use for sound waves. The fractional change in frequency Δv/v is given by $–v_{radial}/c$, where v radial is the component of the source velocity along the line joining the observer to the source relative to the observer; $v_{radial}$ is considered positive when the source moves away from the observer. Thus, the Doppler shift can be expressed as:
$$ \frac { Δv}{v} = – \frac {v_{radial}}{c} $$

Questions for section 10.3

  1. Derive an equation for refraction of plane wave using Huygens principle.
  2. Derive an equation for refraction of light at a rarer medium.
  3. With neat diagram, explain the reflection of a plane wave by
  • A thin prism
  • A convex lens
  • A concave mirror

Example 10.1 What speed should a galaxy move with respect to us so that the sodium line at 589.0 nm is observed at 589.6 nm?
Solution:
Since $ v λ = c $, $ \frac { \Delta v }{v} = -\frac { \Delta λ}{λ} \space ( for small changes in v and λ )
For,
$$ \Delta λ = 589.6 -589.0 = + 0.6 nm $$
We get [using Eq. (10.9)]
$$ \frac { \Delta v }{v} = -\frac { \Delta λ}{λ} = – \frac {-v_{radial}}{c} $$
or, $v_{radial} \cong +c \frac {0.6}{589.0} = + 3.06× 10^5 ms^{-1} $
= 306 km/s
Therefore, the galaxy is moving away from us.

Example 10.2
(a) When monochromatic light is incident on a surface separating two media, the reflected and refracted light both have the same frequency as the incident frequency. Explain why?
(b) When light travels from a rarer to a denser medium, the speed decreases. Does the reduction in speed imply a reduction in the energy carried by the light wave?
(c) In the wave picture of light, intensity of light is determined by the square of the amplitude of the wave. What determines the intensity of light in the photon picture of light.
Solution: (a) Reflection and refraction arise through interaction of incident light with the atomic constituents of matter. Atoms may be viewed as oscillators, which take up the frequency of the external agency (light) causing forced oscillations. The frequency of light emitted by a charged
oscillator equals its frequency of oscillation. Thus, the frequency of scattered light equals the frequency of incident light.
(b) No. Energy carried by a wave depends on the amplitude of the wave, not on the speed of wave propagation.
(c) For a given frequency, intensity of light in the photon picture is determined by the number of photons crossing an unit area per unit time.

10.4 Coherent and incoherent addition of waves

Definition box
Coherent sources: Two sources which can emit light waves of the same wavelength with zero or constant phase difference are called coherent sources.
Incoherent sources: If one or two of the waves undergo changes in frequency irregularly, the phase difference also changes irregularly. Then, the two waves are incoherent.

Principle of superimposition of waves

When two or more waves pass through a region of space, the resultant displacement at any point and at any instant is given by the vector sum of the displacements due to individual waves.

Principle of superposition of waves states that when two or more waves are simultaneously impressed on the particles of the medium, the resultant displacement of any particle is equal to the sum of displacement of all the waves.

If $ \bar y_1$ , $ \bar y_2 $ ….$ \bar y_n$ denote the displacements of n waves meeting at a point , then the resultant displacement is given by,
$$ \bar y_R = \bar y_1 + \bar y_2 + …….+ \bar y_n $$

Superposition of coherent waves:

Let $ \bar y = A_1 \space sin \space (ω t + \phi_1 )…(1)$

And $ \bar y_2 = A_2 \space sin \space (ω t + \phi_2 )..(2)$

Let there be equations of two waves travelling in space with an angular frequency ω .Let the two waves superimpose at a point P.

According to principle of superposition , the resultant displacement at the point P is given by
$$ \bar y_R = \bar y_1 + \bar y_2 $$
$$ y_R = A_1 \space sin (ω t + \phi_1) + A_2 \space sin \space (ω t + \phi_2 )….(3)$$
$$ = A_1 [sin ω t \space cos \phi_1 + cos ω t \space sin \phi_1] +A_2[sin ω t \space cos \phi_2 + cosω t \space sin \phi_2] $$
Let $ A_1 \space cos \phi_1 + A_2 \space cos \phi_2 =A \space cos \phi ….(4)$
$$ A_1 \space sin \phi_1 + A_2 \space sin \phi_2 =A \space sin \phi ….(5)$$

Equation (3) becomes

$$ y_R = A \space cos \phi \space sin ω t + A \space sin \phi \space cos ω t = A \space sin \space (ω t + \phi)…(6)$$
Here , A and $\phi$ are the resultant amplitudes and initial phase of resultant wave at p , then
$$ A = \sqrt { A_1^2 + A_2^2 +2A_1A_2 \space cos ( \phi_1 – \phi_2) } $$
$$ = \sqrt{ A_1^2+A_2^2+2A_1A_2 \space cos \phi }…(7) $$

Where $ \phi = \phi_1 – \phi_2 $ , phase difference between the two waves can be obtained dividing (5) by (4)

$$ tan \phi = \frac { A_1 \space sin \phi_1 + A_2 \space sin \phi_2 }{A_1 \space cos \phi_1 + A_2 \space cos \phi_2} $$

Since I ( intensity of a wave ) $ \propto \space A^2 $ , the resultant intensity I of the wave from equation (7) may be written as

$$ I = I_1 + I_2 + 2 \sqrt { I_1I_2} \space cos \phi ….(8) $$

Case (I):

$$ If \space \phi = \phi_1 – \phi_2 = 0 , 2 \pi ,4 \pi ……n(2 \pi) \space cos \phi = 1 $$
$$ \therefore \space A = A_1 + A_2 $$ 1)
$$ \sqrt I = \sqrt {I_1} + \sqrt {I_2} $$

Note: The resultant amplitude in the above condition is the sum of the two individual amplitudes. The condition refers to the constructive interference.

Case 2:

$ If \phi = \phi_1 – \phi_2 = \pi , 3 \pi , 5 \pi ,…(2n \pm 1) \pi \space cos \phi = -1 $
$$ \therefore A =| A_1-A_2| \space and \space \sqrt I = | \sqrt {I_1}- \sqrt {I_2} | $$

Note: The resultant amplitude in the above condition is referred to as destructive

Note: Consider two sources $S_1$ and $S_2$ moving up and down with some frequency in a trough of water as shown in the figure 10.7 (b).They produce two water waves. Since the displacement produced by each of the waves does not change with time, they are said to be coherent .The above figure 10.7(b) shows the positions of crests ( solid lines) and trough ( dashed lines) at a given instant of time.

Since $ S_1P = $S_2P$ waves from $S_1$ and $S_2$ will take the same time to reach the point P. Hence they arrive at the point P in phase.
If $y_1$ =a cos ωt and $y_2$= a cos ωt are the displacements produced by the sources $S_1$ and $S_2$ at P, then the resultant displacements at P is given by.
$$ y_R = y_1 + y_2 = 2 \space a cos ωt $$

If $I_o$ is the initial intensity of each wave $ I_o \propto a^2 $.Therefore, the resultant intensity at P will be $ I_R =4I_o$.

Note: At any point on the perpendicular bisector of $S_1$ ,$S_2$ the intensity will be $4I_o$.Therefore , the two waves are said to interfere constructively which is called constructive interference.

2) Consider another point Q as shown in the figure 10.7© for which $ S_2Q-S_1Q = 2 λ$

The waves emanating from $S_1$ will arrive exactly as two waves earlier than the waves from $S_2$ and once again they will be in phase. If $y_1$ is the displacement produced by $S_1$ then $y_1 = a \space cos ωt $ then the displacement again they will be in phase.If $y_1$ is the displacement produced by $S_2$ will be given by $ y_2 = a \space cos (ωt-4 \pi ) =a\space cos ωt $

Note: The phase difference corresponding to 2 λ is $ 4 \pi $`
Therefore, the two displacements are once again in phase and intensity will again be $I_o$ giving rise to constructive interference.

3) Consider another point R , $S_2R -S_1R = -1.5 λ $
The waves emanating from $S_1$ will arrive exactly one and half cycles later than the waves from $S_2$ as shown in figure 10.8>Therefore the displacements produced by $S_1$ and $S_2$ are
$$ y_1 = a\space cos ωt $$
$$ y_2 =a \space cos (ωt- 3 \pi )=- a\space cos ωt $$

Conditions for constructive interference due to path difference

If two coherent sources $S_1$ and $S_2$ are vibrating in phase, then for an arbitrary point P the path difference is given by
$$ S_1P \simeq S_2P = n λ (where n = 0,1,2,3,..)$$

We will have constructive interference .The resultant intensity will be maximum and equal to $4I_o$.

Conditions for destructive interference

If the path difference at any arbitrary point P.
$$ S_1P \sim S_2P = \bigg( n+ \frac {1}{2} \bigg) λ \hspace{10mm} ( n=0,1,2,3,…)$$
Then we will have destructive interference and the resultant intensity will be zero (minimum).

4) Let G be any arbitrary point. Let the phase difference between two displacements be $ \phi $.If the displacements produced by $S_1$ is given by
$$ y_1 = a\space cos ωt , then \space the \space displacement\space produced \space by \space S_2 \space would \space be $$
$$ y_2 = a\space cos (ωt + \phi ) \space and \space the \space resultant \space displacement \space at \space point \space G \space will \space be \space given \space by $$
$$ y =y_1 + y_2 $$
$$ = a [\space cos ωt +cos (ωt+ \phi )] $$
$$ = 2a \space cos (\phi /2) cos (ωt+ \phi/2 ) $$
The amplitude of the resultant displacement $A_R$ is $2a \space cos ( \phi /2) $ and therefore the intensity at that point will be
$$ I_R = 4I_o \space cos^2 ( \phi/2) $$

Case 1: If $ \phi = 0 , \pm 2 \pi , \pm 3 \pi , \pm 5 \pi ,…. \pm n (2 \pi ) $ , which corresponds $ S_2P \sim S_1P = n λ$ (n=0,1,2,3,…) the resultant will be maximum i.e.,$I_R = 4I_o$.We will have constructive interference at all those regions.

Case 2: If $ \phi = \pm \pi , \pm 3 \pi , \pm 5 \pi ,…..(2n+1)\pi $ , corresponding to condition $S_2P \sim S!P = \bigg ( n + \frac {1}{2} \bigg) λ $ ( n=0,1,2,3,…) the resultant intensity is minimum zero i.e, $ I_R = 0 $ , we will have destructive at all those regions.

Since the phase difference corresponding to a path difference 1.5 λ is $ 3 \pi $, the two displacements are now out of phase difference will cancel out to give zero intensity. This is referred to as destructive interference.

Superposition of incoherent waves

If the phase difference between the two vibrating sources changes rapidly with time, then the two sources are said to be incoherent. When two incoherent waves meet at a point because of the rapid changes in their phase difference with time, their interference pattern will also change with time. We can get a time averaged intensity distribution. Therefore , the average intensity will be given by ,
$$ < I> = 4I_o < cos^2( \phi /2)>$$
(Note: Angular brackets represent time averaged value ).

If $ \phi (t) $ varies randomly with time-average quantity $$ will be $ \frac {1}{2} $ , because the cosine function $ cos ^2(\phi/2)$ will randomly vary between o and 1 and the average value will be $ \frac {1}{2} $.Therefore , the resultant intensity will be given by $I=2I_o$ at all points.
When two incoherent waves superimpose at any point, their intensities just add up.

Note: This implies that the superposition of incoherent waves gives uniform illumination at every point and which is equal to then sum of the intensities of the component waves.

Questions for section 10.4

1. Define coherent and incoherent sources.

2. Define superposition of waves.

3. Discuss any three of the ways of superposition of waves with figures.

10.5 Interference of light waves and Young’s experiment

Thomas Young demonstrated the interference of light using two visual coherent sources S in a small pinhole illuminated by sunlight which acts like primary source and produces spherical wave fronts in the forward direction.

An opaque screen with two identical pinholes S1 and S2 which are equidistant from S are kept where the two identical pinholes behave like coherent sources because the light coming out of them is derived from the same source. Thus both S1 and S2 will be locked in phase.

A screen MN is placed at some distance from S1 and S2 on which interference pattern is formed with alternate bright and dark fringes.
If the crests and troughs of one wave reinforce the crests and troughs of other wave respectively, then bright fringe forms at those regions on the screen with double amplitude of vibration versa.

If the crests of one wave coincide with the trough of the other or vice versa, dark fringe forms on the screen. At these regions, the amplitude of vibration is zero.

Intensity of interference pattern

Let a be the amplitude of each wave from $S_1$ and $S_2$ and $ \phi$ be the phase difference between them at a point P on the screen. If $y_1$ and $y_2$ are the displacement of the waves at P ,then
$$ y_1 = a \space sin ωt …(1)$$
$$ y_2 = a \space sin (ωt + \phi)…(2) $$

The resultant displacement at P is

$$ y_R = y_1 + y_2 $$
$$ i.e., y_R = a \space sin ωt + a \space sin (ωt + \phi) $$
$$ = a \space sin ωt + a \space sin ωt \space cos \phi + a \space cos ωt \space sin \phi $$
$$ = a \space sin ωt[1+cos \phi] +a \space cos ωt \space sin \phi…(3)$

Let $ a[1+ cos \phi ] =R \space cos α …(4)$

$$ and \space a \space sin \phi = R \space sin α = ….(5) $$
$$ \therefore y_R = R \space sin ωt \space cos α + R \space cosωt \space sin α $$
$$ = R \space sin (ωt+ α) $$
∴ At P the resultant amplitude is R.

From (4) and (5)

$$ R^2 \space cos^2 α + R^2 \space sin^2 α = a^2[1+cos \phi]+ a^2 \space sin^2 \phi $$
$$ R^2 = a^2 [1+cos^2 \phi +2 \space cos \phi ] + a^2 \space sin^2 \phi $$
$$ = a^2 +2a^2 \space cos \phi +a^2 [sin^2 \phi +cos^2 \phi] $$
$$ = 2a^2 +2a^2 \space cos \phi = 2a^2 [1+cos \phi] $$
$$ = 2a^2(2 \space cos^2( \phi /2) = 4a^2 \space cos^2 ( \phi /2) $$ (check)

If$ I_1 =I_2 =I_o $ where $I_o$ is the initial intensity of individual waves then

$$ I_o \propto a^2 \ce{->} I_o =Ka^2 $$

If $I_R$ is the resultant intensity at point P then
$$ I_R \propto R^2 \ce{->} I_R = KR^2 $$
$$ I_R = K \space 4a^2 \space cos^2( \phi/2) = 4 \space Ka^2 \space cos^2( \phi/2) $$
$$ I_R = 4 I_o \space cos^2 ( \phi/2) $$

Condition for constructive interference or for finding bright fringes or maxima

If the phase difference

$$ \phi = 0 , \pm 2 \pi , \pm 2(2 \pi) …….\pm n (2 \pi) \space or $$
$$ \frac { \phi}{2} = 0 , \pm \pi , \pm 3 \pi ………\pm n \pi $$

i.e, if $ \frac {\phi }{2} = \pm n \pi $ where n = 0,1,2,3….or the corresponding path difference
$$ x = n λ \space where n =0,1,2…..then , I_R =4I_o(maximum)$$

i.e The intensity maxima occurs giving rise to bright fringes. And the interference in this region is called as constructive interference.

Conditions for destructive interference or for finding dark fringe or minima

If the phase difference $ \phi = \pm \pi , \pm 3 \pi , \pm 5 \pi , \pm (2n+1) \pi $

Or

$$ \frac { \phi}{ 2} = \pm \frac {\pi}{2} , \pm \frac {3 \pi}{2} , \pm \frac {5 \pi}{2} ,……, \pm (2n+1) \frac {\pi}{2} $$
$$ i.e., \phi = \pm \bigg( n + \frac {1}{2} \bigg) \pi \space where \space n=0,1,2,3,…$$

Or the corresponding path difference

$$ x = \pm \bigg( n + \frac {1}{2} \bigg ) λ \space where \space n =0,1,2,3,…$$

i.e.., the intensity becomes zero and we get dark fringes or minima and the interference is called destructive interference.

Note: The intensity varies between maximum of $4I_o$ and minimum of zero as shown in figure below. The energy is redistributed over the region of bright bands. Hence, it is also a consequence of law conservation of energy.

Finding the positions of different order maxima and minima and fringe width (β )

Let ‘d’ be the separation between the two slits , D be the distance of screen from the two slits , λ be the wavelength under consideration and $y_n$ be the distance of a point P where either certain order of maxima or minima forms

Initial path difference $ x =S_2P-S_1P $ between the waves at point P.

If $ \phi $ is the initial difference , and θ is the angular deviation of point P w.r.t.O

Then from figure , $ sin \phi = \frac {x}{d} $ , tan θ = \frac {y_n}{d}$ ,for small angular $ sin \phi = tan θ $

$$ i.e., \frac {x}{d} = \frac {y_n}{D} \hspace{10mm} \therefore y_n = \frac {xD}{d} $$
$n^{th}$ order bright fringe is formed .For bright fringe path difference x = n λ.
$$ \therefore for \space n^{th} \space bright (maxima) \space y_{n^{th} \space bright}= \frac { n λD}{d} $$
$$ \therefore y_[1^{st}} \space bright \space (maxima) = \frac { λD}{d} $$
$$ Y_{2^{nd}} \space maxima = \frac {2 λD}{d} $$
$$ y_{(n+1)^{th}} \space maxima = \frac {(n+1) λD}{d} $$

For dark fringe path difference x = $ \bigg( n + \frac {1}{2} \bigg) λ$

$$ \therefore y_{n^{th}} \space dark minima = \frac { \bigg ( n+ \frac {1}{2} \bigg) λD}{d} $$
$$ y_{1^{st} \dark \space (1^{st} \space minima ) = \frac { λD}{2d} \space (n=0)$$
$$ y_{2^{nd} \dark \space (1^{st} \space minima ) = \frac { 3λD}{2d} \space (n=0)$$

Fringe width (β): The distance between successive bright or dark fringes is defined as fringe width, and it is denoted by symbol β.

$$ β{maxima} = y{(n+1)^{th}maxima} – y_{n^{th}maxima} $$
$$ i.e.., (n+1-n) \frac { λD}{d}=\frac { λD}{d} $$
$$ β{minima} = 2^{nd}{minima} – 1^{st}{minima} $$ $$ = \frac {3λD}{2d} – \frac {λD}{2d} $$ $$ β{minima} = \frac { λD}{d} $$
$$ β{maxima}= β{minima} = \frac { λD}{d} $$

Note: Angular deviation of fringes

For small angular deviation $ sin \phi = tan \theta = \theta $
$$ \theta = \frac {y}{D} = \frac {y}{d} = \frac { β}{D} $$

Questions for section 10.5

  1. How is the interference of light waves demonstrated by Young’s experiment?
  2. Derive an equation for the resultant intensity of interference of pattern.
  3. What are the conditions for destructive interference.
  4. How do we determine the position of different order maxima and minima of fringe width β?

10.6 Diffraction

Definition box
The phenomenon in which there is encroachment of light in the geometrical shadow region is called Diffraction.
OR
The bending of waves at the edges of small obstacles is known as Diffraction.

*** copy image from pg 71 of shastry-Fig 6 in coreldraw

Some of the examples of the diffraction are the coloured spectra observed while viewing a light at distance from a piece of cloth, the colour seen on CD etc.
Some of the applications of diffraction of light are:

  1. Velocity of sound can be determined.
  2. Ultra-sound scanning is done using this principle.
  3. Wavelength of monochromatic and composite radiations can be determined.
  4. Structures of solids can be determined by x-ray, electron and neutron diffraction.
  5. The wave-lengths of waves can be determined.

10.6.1 Diffraction at a single slit

Information box

Young’s double slit experiment

A clear image of how the Young’s double slit experiment’s set up is shown.

In single slit experiment, the double slit is replaced by single slit and the narrow slit is illuminated by a monochromatic source. A broad pattern with a central bright region is seen. On both sides, there are alternate dark and bright regions, the intensity becoming weaker away from the centre.

The shows a parallel beam of light falling normally on a single slit LN of width a. The diffracted light goes on to meet a screen. The midpoint of the slit is M. A straight line through M perpendicular to the slit plane meets the screen at C.

We want the intensity at any point P on the screen. As before, straight lines joining P to the different points L,M,N, etc., can be treated as parallel, making an angle q with the normal MC.

The basic idea is to divide the slit into much smaller parts, and add their contributions at P with the proper phase differences. We are treating different parts of the wave front at the slit as secondary sources. Because the incoming wave front is parallel to the plane of the slit, these sources are in phase.

The path difference NP – LP between the two edges of the slit can be calculated exactly as for Young’s experiment. From figure,
NP – LP = NQ
= a sin q
aθ

Similarly, if two points $M_1$ and $M_2$ in the slit plane are separated by y, the path difference $M_2P – M_1P ≈ yθ$.

We now have to sum up equal, coherent contributions from a large number of sources, each with a different phase. This calculation was made by Fresnel using integral calculus, so we omit it here. The main features of the diffraction pattern can be understood by simple arguments.

At the central point C on the screen, the angle q is zero. All path differences are zero and hence all the parts of the slit contribute in phase. This gives maximum intensity at C. Experimental observation shown in figure, it indicates that the intensity has a central maximum at q = 0 and other secondary maxima at θ (n+1/2) λ/a, and has minima (zero intensity) at θ nλ/a,

n = ±1, ±2, ±3, …. It is easy to see why it has minima at these values of angle. Consider first the angle q where the path difference aθ is λ. Then,
θ = λ/a

Let us divide the slit into two equal halves LM and MN each of size a/2. For every point $M_1$ in LM, there is a point$ M_2$ in MN such that
$M_1M_2 = \frac {a}{2} $$
The path difference between $M_1$ and $M_2$ at $P = M_2P – M_1P$
=θa/2 =λ/2 for the angle chosen.

This means that the contributions from $M_1$ and $M_2$ are 180º out of phase and cancel in the direction

q = λ/a. Contributions from the two halves of the slit LM and MN, therefore, cancel each other. Previous equation gives the angle at which the intensity falls to zero. One can similarly show that the intensity is zero for q = nλ/a, with n being any integer. The angular size of the central maximum increases when the slit width a decreases.

Consider an angle q = 3λ/2a which is midway between two of the dark fringes. Divide the slit into three equal parts. If we take the first two thirds of the slit, the path difference between the two ends would be
$$ \frac {2}{3}a×θ = \frac {2a}{3}× \frac {3 λ}{2a} = λ$$

The first two-thirds of the slit can therefore be divided into two halves which have aλ/2 path difference. The contributions of these two halves cancel. Only the remaining one-third of the slit contributes to the intensity at a point between the two minima.

There are maxima at (n + 1/2) l/a with n = 2, 3, etc. These become weaker with increasing n, since only one-fifth, one-seventh, etc., of the slit contributes in these cases. The photograph and intensity pattern corresponding to it is shown in figure.

In the double-slit experiment, we must note that the pattern on the screen is actually a superposition of single-slit diffraction from each slit or hole, and the double-slit interference pattern. This is shown in following figure. It shows a broader diffraction peak in which there appear several fringes of smaller width due to double-slit interference. The number of interference fringes occurring in the broad diffraction peak depends on the ratio d/a, that is the ratio of the distance between the two slits to the width of a slit. In the limit of a becoming very small, the diffraction pattern will become very flat and we will observe the two-slit interference pattern.

We now have a source at S, and only one hole (or slit) $S_1$ or $S_2$. This will produce a single- slit diffraction pattern on the screen. The centre of the central bright fringe will appear at a point which lies on the straight line $SS_1$ or$ SS_2$, as the case may be.

Differences between interference and diffraction

InterferenceDiffraction
Interference is the result of superimposition of the waves originating from the same source.Diffraction is the result of superimposition of waves originating from subdivision of wave originating from coherent sources.
Interference fringes are of same width.Diffraction fringes are of different widths.
All the bands have same brightness and darkness.Brightness of bands decreases as we move away from the centre.
For an angle λ/a, we get a maximum for two narrow slits separated by a distance.For a angle slit of width a, the first null due to superimposition of wavelets from same wave front occurs at an angle λ\a.

In our discussion of Young’s experiment and the single-slit diffraction, we have assumed that the screen on which the fringes are formed is at a large distance. The two or more paths from the slits to the screen were treated as parallel. This situation also occurs when we place a converging lens after the slits and place the screen at the focus. Parallel paths from the slit are combined at a single point on the screen. Note that the lens does not introduce any extra path differences in a parallel beam.

This arrangement is often used since it gives more intensity than placing the screen far away. If ‘f’ is the focal length of the lens, then we can easily work out the size of the central bright maximum. In terms of angles, the separation of the central maximum from the first null of the diffraction pattern is l/a. Hence, the size on the screen will be f λ/a.

10.6.2 Seeing the single slit diffraction pattern

When two razor blades are held such that the edges are parallel and have narrow slit in between, in front of a clear glass electric bulb having a straight filament, the single slit diffraction pattern can be seen from figure. The pattern consists of light and dark bands. In the experiment, the filament acts as a first slit in the case of diffraction due to a narrow slit.

The intensity falls as we go to successive maxima away from the centre on either side. The intensity of the central maximum is twice that of the other maxima.

10.6.3 Resolving power of optical instruments

Let us consider a parallel beam of light falling on a convex lens. If the lens is well corrected for aberrations, then geometrical optics tells us that the beam will get focused to a point. However, because of diffraction, the beam instead of getting focused to a point gets focused to a spot of finite area. In this case the effects due to diffraction can be taken into account by considering a plane wave incident on a circular aperture followed by a convex lens.

The analysis of the corresponding diffraction pattern is quite involved; however, in principle, it is similar to the analysis carried out to obtain the single-slit diffraction pattern. Taking into account the effects due to diffraction, the pattern on the focal plane would consist of a central bright region surrounded by concentric dark and bright rings (Fig. 10.19). A detailed analysis shows that the radius of the central bright region is approximately given by

$$ r_o = \frac {1.22 \space λf}{2a} = \frac {0.61 λf}{a} $$

where f is the focal length of the lens and 2a is the diameter of the circular aperture or the diameter of the lens, whichever is smaller. Typically if
λ » 0.5 μm, f » 20 cm and a » 5 cm

we have

r0 » 1.2 μm

Although the size of the spot is very small, it plays an important role in determining the limit of resolution of optical instruments like a telescope or a microscope. For the two stars to be just resolved

$$ f \Delta \theta \approx r_o \approx \frac {0.61 \space λf}{a} $$
Implying
$$ \Delta \theta \approx \frac {0.61 \space λ}{a} $$…(10.25)$$

Thus $$ \Delta \theta $ will be small if the diameter of the objective is large. This implies that the telescope will have better resolving power if a is large. It is for this reason that for better resolution, a telescope must have a large diameter objective.

We can apply a similar argument to the objective lens of a microscope. In this case, the object is placed slightly beyond f, so that a real image is formed at a distance v [Fig. 10.20]. The magnification – ratio of image size to object size – is given by m l v/f. It can be seen from Fig. 10.20 that $ D/f \approx 2 tan β….. (10.26) $

where 2 β is the angle subtended by the diameter of the objective lens at the focus of the microscope.

When the separation between two points in a microscopic specimen is comparable to the wavelength l of the light, the diffraction effects become important. The image of a point object will again be a diffraction pattern whose size in the image plane will be
$$ v \theta = v \frac {1.22λ}{D} ….(10.27)$$

Two objects whose images are closer than this distance will not be resolved, they will be seen as one. The corresponding minimum separation, $d_{min}$, in the object plane is given by
$$ d_{min} = v frac {1.22λ}{D} \m $$
$$ = \frac {1.22λ}{D}. \frac {v}{m} $$
$$= \frac {1.22 λf}{D}……..(10.28)$$

Now, combining Eqs. (10.26) and (10.28), we get
$$ d_{min} =\frac {1.22λ}{2\space tan β $$
$$ d_{min} = \frac {1.22λ}{2\space sin β …(10.29)$$ (check)

If the medium between the object and the objective lens is not air but a medium of refractive index n, Eq. (10.29) gets modified to
$$ d_{min} = \frac {1.22λ}{2n\space sin β …(10.29)$$

The resolving power of the microscope is given by the reciprocal of the minimum separation of two points seen as distinct. It can be seen from equation that the resolving power can be increased by choosing a medium of higher refractive index. Usually oil having a refractive index close to that of the objective glass is used. Such an arrangement is called an ‘oil immersion objective’. Notice that it is not possible to make sin b larger than unity. Thus, we see that the resolving power of a microscope is basically determined by the wavelength of the light used.

10.6.4 The validity of ray optics

An aperture of size a illuminated by a parallel beam sends diffracted light into an angle of approximately /a. This is the angular size of the bright central maximum. In travelling a distance z, the diffracted beam therefore acquires a width zλ/a due to diffraction. It is interesting to ask at what value of z the spreading due to diffraction becomes comparable to the size a of the aperture. We thus approximately equate zλ/a with a. This gives the distance beyond which divergence of the beam of width a becomes significant. Therefore,

$$ z \approx \frac {a^2}{ λ} …(10.31)$$

We define a quantity $z_F$ called the Fresnel distance by the following equation

$$ z_F \approx \frac { a^2}{ λ} $$

Equation shows that for distances much smaller than $z_F$, the spreading due to diffraction is smaller compared to the size of the beam.

It becomes comparable when the distance is approximately $z_F$ . For distances much greater than $z_F$, the spreading due to diffraction dominates over that due to ray optics.

Equation also shows that ray optics is valid in the limit of wavelength tending to zero.

Questions for section 10.6

  1. Define diffraction. Mention some of its applications and examples.
  2. Explain the concept of diffraction at a single slit using equations.
  3. Derive the conditions for maximum intensity and maxima.
  4. Give the differences between interference and diffraction.
  5. Derive an equation for width of central maximum by single slit diffraction pattern.
  6. Derive equations for resolving power of telescope and microscope.
  7. What is the validity of ray optics? Give an expression for Fresnel distance.

10.7 Polarisation

Concept box
The phenomenon of interference and diffraction has proved that light propagates in the form of waves, but it does not reveal whether the waves are longitudinal or transverse. The electromagnetic theory of light waves says that light is transverse in nature. Polarisation of light establishes this fact.
Polarity represents a state of having opposite tendencies.
Definition box
Restricting the vibrations of light waves to one plane is known as Polarisation.

Let us consider holding a long string that is held horizontally, the other end of which is assumed to be fixed. If we move the end of the string up and down in a periodic manner, we will generate a wave propagating in the +x direction. Such a wave could be described by the following equation

y (x,t ) = a sin (kx – ω t)

where a and ω (= 2p ν ) represent the amplitude and the angular frequency of the wave, respectively; further,

$$ λ = \frac {2 \pi }{k}$$

It represents the wavelength associated with the wave. Since the displacement (which is along the y direction) is at right angles to the direction of propagation of the wave, we have what is known as a transverse wave.

Also, since the displacement is in the y direction, it is often referred to as a y-polarised wave. Since each point on the string moves on a straight line, the wave is also referred to as a linearly polarised wave. Further, the string always remains confined to the x-y plane and therefore it is also referred to as a plane polarised wave.

In a similar manner we can consider the vibration of the string in the x-z plane generating a z polarised wave whose displacement will be given by

z (x,t ) = a sin (kx – ωt )

The displacement of each point of the string is always at right angles to the direction of propagation of the wave.

If the plane of vibration of the string is changed randomly in very short intervals of time, then we have what is known as an un-polarised wave.
If an un-polarised light wave is incident on such a Polaroid then the light wave will get linearly polarised with the electric vector oscillating along a direction perpendicular to the aligned molecules; this direction is known as the pass-axis of the Polaroid.

Thus, if the light from an ordinary source (like a sodium lamp) passes through a Polaroid sheet $P_1$, it is observed that its intensity is reduced by half. Rotating $P_1$ has no effect on the transmitted beam and transmitted intensity remains constant. Now, let an identical piece of Polaroid $P_2$ be placed before $P_1$. As expected, the light from the lamp is reduced in intensity on passing through $P_2$ alone. But now rotating $P_1$ has a dramatic effect on the light coming from $P_2$. In one position, the intensity transmitted by $P_2$ followed by $P_1$ is nearly zero. When turned by 90º from this position, $P_1$ transmits nearly the full intensity emerging from $P_2$.

The above experiment can be easily understood by assuming that light passing through the Polaroid $P_2$ gets polarised along the pass-axis of $P_2$. If the pass-axis of $P_2$ makes an angle q with the pass-axis of $P_1$, then when the polarised beam passes through the Polaroid $P_2$, the component E cos $ \theta $ will pass through $P_2$.

Thus, as we rotate the Polaroid$ P_1$ (or $P_2$), the intensity will vary as:

*** 10.35 pg 378 ncert

$$ I = I_0 \space cos2 \theta $$

Where I0 is the intensity of the polarized light after passing through $P_1$. This is known as Malus’ law.

By putting a second Polaroid, the intensity can be further controlled from 50% to zero of the incident intensity by adjusting the angle between the pass-axes of two polaroids.

Polaroid can be used to control the intensity, in sunglasses, windowpanes, etc. Polaroid are also used in photographic cameras and 3D movie cameras.

10.7.1 Polarisation by scattering

The light from a clear blue portion of the sky shows a rise and fall of intensity when viewed through a Polaroid which is rotated. This is nothing but sunlight, which has changed its direction (having been scattered) on encountering the molecules of the earth’s atmosphere. As first figure shows, the incident sunlight is un-polarised. The dots stand for polarisation perpendicular to the plane of the figure. The double arrows show polarisation in the plane of the figure.

Under the influence of the electric field of the incident wave the electrons in the molecules acquire components of motion in both these directions. We have drawn an observer looking at 90° to the direction of the sun. Clearly, charges accelerating parallel to the double arrows do not radiate energy towards this observer since their acceleration has no transverse component.

The radiation scattered by the molecule is therefore represented by dots. It is polarised perpendicular to the plane of the figure. This explains the polarisation of scattered light from the sky.

The scattering of light by molecules was intensively investigated by C.V. Raman and his collaborators in Kolkata in the 1920s. Raman was awarded the Nobel Prize for Physics in 1930 for this work.

10.7.2 Polarisation by reflection

It was discovered by Mauls. He found that light reflected from surface of glass was either partially polarized or completely polarized, the degree of polarization depending upon the angle of incidence as shown in second figure.

The dots and arrows in the figure indicate that both polarizations are present in the incident and reflected waves.

In the considered case, the reflected wave travels at right angles to the refracted wave. The electrons oscillating in the water produces the reflected wave. These move in two directions transverse to the radiation from wave in the medium.

The arrows parallel to the direction of the reflected wave motion in this direction does not contribute to reflected wave. So, the reflected light is linearly polarised perpendicular to the plane of figure. The transmitted intensity will be zero when the axes of analyser are in the plane of figure.
When un-polarised light is incident on the boundary between two transparent media, the reflected light is polarised with its electric vector perpendicular to the plane of incidence when the refracted and reflected rays make a right angle with each other. Thus we have seen that when reflected wave is perpendicular to the refracted wave, the reflected wave is a totally polarised wave. The angle of incidence in this case is called Brewster’s angle and is denoted by $i_B$. We can see that $i_B$ is related to the refractive index of the denser medium. Since we have $i_B+r = \ pi/2$, we get from Snell’s law

$$ n = \frac { sin \space i_B}{sin \space r} = \frac { sin \space i_B}{sin \bigg( \frac { \pi}{2} –i_B \bigg)} = \frac { sin \space i_B}{cos \space i_B} = tan \space i_B $$

This is known as Brewster’s law. The law states that the refractive index is equal to the tangent of polarizing angle.

Partially polarized light

In this special situation, one of the two perpendicular components of the electric field is zero. At other angles, both components are present but one is stronger than the other. There is no stable phase relationship between the two perpendicular components since these are derived from two perpendicular components of an Un-polarised beam. When such light is viewed through a rotating analyser, one sees a maximum and a minimum of intensity but not complete darkness. This kind of light is called partially polarised.

Total transmission of light

When an un-polarised beam of light is incident at the Brewster’s angle on an interface of two media, only a part of light with electric field vector perpendicular to the plane of incidence gets reflected by using a good polariser.

If we completely remove all the light with its electric vector perpendicular to the plane of incidence and let this light be incident on the surface of the prism at Brewster’s angle, we observe no reflection and there will be total transmission of light.

Questions for section 10.7

  1. Define polarization.
  2. State Malus law.
  3. Give some uses of poleroids.
  4. Explain polarization by scattering.
  5. Explain polarization by reflection.
  6. State the Brewster’s law with an equation for the same.
  7. What is partially polarized and total transmission of light?