Preview:
- In this chapter, we shall examine the underlying mechanisms by which cells divide, grow and create multiple copies. We need to equip ourselves with few important points before we begin.
- The whole sequence of events by which a cell duplicates its genome, synthesises the constituents within it and eventually divides into two daughter cells is what we call a cell cycle.
- There are two major phases that occur during a cell cycle Interphase and M phase.
- The interphase is in turn divided into: G1, S and G2 phases while, the M phase also comprises of the sub stages: Prophase, Metaphase, Anaphase and Telophase. We will also learn about the peculiar quiescent stage as we walk through these phases.
- At the end of M phase or mitosis, two daughter nuclei are formed and the process is called, karyokinesis.
- This process is followed by Cytokinesis during which, the cell splits into two daughter cells.
- Next, we will learn about another type of cell division called, Meiosis during which the original diploid set of chromosome reduces to half the number, resulting in the production of haploid daughter cells. Meiosis is divided into two major stages: Meiosis 1 and Meiosis 2, each stage is in turn divided into prophase, metaphase, anaphase and telophase.
10.0 Introduction:
- Growth and reproduction are characteristics of cells and thus, of living organisms.
- All cells reproduce by dividing into two each parental cell give rise to two daughter cells each time they divide. These newly formed daughter cells can themselves grow and divide giving rise to a new cell population.
- In other words, such cycles of growth and division allow a single cell to form a structure consisting of millions of cells.
10.1 Cell Cycle
- During the division of a cell, DNA replication and cell growth take place. The processes like, cell division, DNA replication, and cell growth have to take place in a coordinated way to ensure correct division and formation of progeny cells containing intact genomes.
- The sequence of events by which a cell duplicates its genome, synthesises the other constituents of the cell and eventually divides into two daughter cells is termed, cell cycle.
10.1.1 Phases of Cell Cycle
The human cell observed as a typical eukaryotic cell revealed that these cells divide once in approximately every 24 hours (Figure 10.1 above). However, this duration of cell cycle can vary from organism to organism and also from cell type to cell type. Yeast for example, can progress through the cell cycle in only about 90 minutes.

The cell cycle is divided into two basic phases:
Interphase
M Phase (Mitosis phase)
The Interphase: The Interphase represents the phase between two successive M phases. The interphase, though called the resting phase, is the time during which the cell is preparing for division by undergoing both cell growth and DNA replication in an orderly manner. The interphase is further divided into three phases:
$G_1$ phase (Gap 1):
- $G_1$ phase corresponds to the interval between mitosis and initiation of DNA replication.
- During $G_1$ phase, the cell is metabolically active and continuously grows.
S phase (Synthesis):
- S or synthesis phase marks the period during which DNA synthesis or replication takes place.
- During this phase, the amount of DNA per cell doubles. If the initial amount of DNA is denoted as 2C then it increases to 4C. However, there is no increase in the chromosome number; if the cell had diploid or 2n number of chromosomes at $G_1$, even after S phase the number of chromosomes remains the same, that is, 2n.
- In animal cells, during the S phase, DNA replication begins in the nucleus, and the cytoplasm duplicates in the centriole.
$G_2$ phase (Gap 2):
- During the $G_2$ phase, proteins which help in mitosis are synthesised.
- The cell growth continues.
The M phase: The M Phase represents the phase when the actual cell division or mitosis occurs. The M Phase starts with the nuclear division (karyokinesis). This separated nucleus corresponds to daughter chromosomes. The end of the phase is marked by division of cytoplasm (cytokinesis).
Quiescent Stage: Some cells in the adult animals do not appear to exhibit division (for example, heart cells) and many other cells divide only occasionally when cells that have been lost because of injury or cell death need to be replaced.
These cells that do not divide further exit $G_1$ phase to enter an inactive stage called, quiescent stage ($G_0$) of the cell cycle.
Cells in this stage remain metabolically active but no longer proliferate (spread or thrive) unless there is a requirement.
| Note box: It is significant to note that in the 24 hour average duration of cell cycle of a human cell, cell division proper lasts for only about an hour. The interphase lasts more than 95% of the duration of cell cycle. In animals, mitotic cell division is only seen in the diploid somatic cells (any cell of a living organism other than the reproductive cells are somatic cells). Against this, the plants can show mitotic divisions in both haploid and diploid cells. |
Questions from section 10.1:
1. What do we mean by a cell cycle?
2. Describe briefly, the two major phases of the cell cycle: Interphase (with sub stages) and M phase.
3. What is quiescent stage?
10.2 M Phase
- This is the most important period of the cell cycle, involving a major reorganisation of all components of the cell.
- The number of chromosomes in the parent and progeny cells is the same. Hence, the M phase or Mitotic phase is also called as equational division.
- Mitosis has been divided into four stages of nuclear division. They are:
- Prophase
- Metaphase
- Anaphase
- Telophase
10.2.1 Prophase

Characteristics:
- Prophase which is the first stage of mitosis occurs after the S and $G_2$ phases of interphase. In the S and $G_2$ phases, the new DNA molecules formed are not distinct but intertwined.
- During the Prophase, the initiation of condensation of chromosomal material. This involves, untangling of chromosomal material (Figure 10.2 a).
- The centriole, which had undergone duplication during S phase of interphase, now begins to move towards opposite poles of the cell.
- The completion of prophase can thus be marked by the following characteristic events:
- Chromosomal material condenses to form compact mitotic chromosomes.
- Chromosomes are seen to be composed of two chromatids attached together at the centromere.
- Initiation of the assembly of mitotic spindle, the microtubules, the proteinaceous components of the cell cytoplasm help in the process.
- Cells at the end of prophase, when viewed under the microscope, do not show golgi complexes, endoplasmic reticulum, nucleolus and the nuclear envelope.
10.2.2 Metaphase
| Concept box: Sister chromatids: Sister Chromatids refer to the two identical copies (chromatids) formed by the replication of a single chromosome, with both copies joined together by a common centromere. Daughter chromosomes: The paired chromatids or sister chromatids eventually separate and are known as daughter chromosomes. |
Characteristics:
- The complete disintegration of the nuclear envelope marks the start of the second phase of mitosis the metaphase.
- The chromosomes are spread through the cytoplasm of the cell due to the disintegration.
- By this stage, condensation of chromosomes is completed and they can be observed clearly under the microscope. Thus, at this stage, the morphology of chromosomes is most easily studied.
- In this stage, the chromosome is called metaphase chromosome which is made up of two sister chromatids, which are held together by the centromere (Figure 10.2 b).
- Small disc-shaped structures at the surface of the centromeres are called kinetochores. These structures serve as the sites of attachment of spindle fibres (formed by the spindle fibres) to the chromosomes that are moved into position at the centre of the cell.
- Hence, the metaphase is characterised by all the chromosomes coming to lie at the equator with one chromatid of each chromosome connected by its kinetochore to spindle fibres from one pole and its sister chromatid connected by its kinetochore to spindle fibres from the opposite pole (Figure 10.2 b).
- The plane of alignment of the chromosomes at metaphase is referred to as the metaphase plate.
- The key features of metaphase are:
- Spindle fibres attach to kinetochores of chromosomes.
- Chromosomes are moved to spindle equator and get aligned along metaphase plate through spindle fibres to both poles.
10.2.3 Anaphase
Characteristics:
- At the onset of anaphase, each chromosome arranged at the metaphase plate is split simultaneously.
- The two daughter chromatids, now referred to as chromosomes of the future daughter nuclei, begin their migration towards the two opposite poles.
- As each chromosome moves away from the equatorial plate, the centromere of each chromosome is towards the pole and hence at the leading edge, with the arms of the chromosome trailing behind (Figure 10.2 c below).
- Thus, the anaphase stage is characterised by the following key events:
- Centromeres split and chromatids separate.
- Chromatids move to opposite poles.

10.2.4 Telophase
Characteristics:
- At the beginning of the final stage of mitosis, that is, telophase, the chromosomes that have reached their respective poles decondense and hence, do not appear as separate individuals.
- The chromosomes can no longer be seen as individuals and the chromatin material tends to form a mass at the two poles (Figure 10.2 d).
- This is the stage which shows the following key events:
- Chromosomes cluster at opposite spindle poles and their identity is lost as discrete elements.
- Nuclear envelope assembles around the chromosome clusters.
- Nucleolus, golgi complex and ER reform.
- Therefore, through Mitosis, the segregation of duplicated chromosomes into daughter nuclei called, karyokinesis occurs.
10.2.5 Cytokinesis
- The cell also gets divided into two daughter cells by a separate process called, cytokinesis at the end of which cell division is complete (Figure 10.2 e).
Steps in cytokinesis:
- In an animal cell, this is achieved by the appearance of a furrow in the plasma membrane.
- The furrow gradually deepens and ultimately joins in the centre dividing the cell cytoplasm into two.
- In plant cells, wall formation starts in the centre of the cell and grows outward to meet the existing lateral walls. The formation of the new cell wall begins with the formation of a simple precursor, called the cell-plate that represents the middle lamella between the walls of two adjacent cells.
- At the time of cytoplasmic division, organelles like mitochondria and plastids get distributed to the two daughter cells.
| Note box: In some organisms, karyokinesis is not followed by cytokinesis as a result of which multinucleate condition arises leading to the formation of syncytium (for example, liquid endosperm in coco |
Questions from section 10.2:
1. State the characteristics of the following major events in M phase:
- prophase
- metaphase
- anaphase and
- telophase.
2. What is Cytokinesis? Describe stepwise, what happens during cytokinesis.
10.3 Significance of Mitosis
- Mitosis or the equational division is usually restricted to the diploid cells only. However, in some lower plants and in some social insects haploid cells also divide by mitosis.
- Mitosis usually results in the production of diploid daughter cells with identical genetic complement.
- The growth of multicellular organisms is due to mitosis. Cell growth results in disturbance of ratio between the nucleus and the cytoplasm. It therefore becomes essential for the cell to divide to preserve the nucleo-cytoplasmic ratio.
- A very significant contribution of mitosis is cell repair. For instance, the cells of the upper layer of the epidermis, cells of the lining of the gut, and blood cells are being constantly replaced by mitosis.
- Mitotic divisions in the meristematic tissues the apical and the lateral cambium, result in a continuous growth of plants throughout their life.
Questions from section 10.3:
1. Explain the significance of mitosis.
10.4 Meiosis
Characteristics:
- The production of offspring by sexual reproduction includes the fusion of the male and female gametes, each with a complete haploid set of chromosomes.
- Gametes are formed from specialised diploid cells. The cell division that reduces the chromosome number by half resulting in the production of haploid daughter cells is called meiosis.
- Thus, Meiosis ensures the production of haploid phase in the life cycle of sexually reproducing organisms whereas fertilisation restores the diploid phase.
- Meiosis occurs during the gametogenesis in plants and animals. This leads to the formation of haploid gametes.
- The key features of meiosis are as follows:
- Meiosis involves two sequential cycles of nuclear and cell division called meiosis I and meiosis II respectively but only a single cycle of DNA replication.
- Meiosis I is initiated after the parental chromosomes have replicated to produce identical sister chromatids at the S phase.
- Meiosis involves pairing of homologous chromosomes and recombination between them.
- Four haploid cells are formed at the end of meiosis II.
The events of meiosis can be grouped under the following phases and are discussed in detail in the following sub sections.

10.4.1 Meiosis I
Prophase I:
Characteristics:
a) Prophase of the first meiotic division is typically longer and more complex when compared to prophase of mitosis.
b) It has been further subdivided into the following five phases based on chromosomal behaviour, that is, Leptotene, Zygotene, Pachytene, Diplotene and Diakinesis.
Leptotene:
- During leptotene stage, the chromosomes become gradually visible under the light microscope.
- The compaction of chromosomes continues throughout leptotene.
Zygotene:
- This is followed by the second stage of prophase I called zygotene.
- During this stage, chromosomes start pairing together and this process of association is called synapsis. Such paired chromosomes are called homologous chromosomes. The pairing during synapsis is achieved with the help of special proteins called, synaptonemal complex.
- The complex formed by a pair of synapsed homologous chromosomes is called a bivalent.
Pachytene:
| Concept box: Crossing over is the exchange of genetic material between two homologous chromosomes. |
.
- The first two stages of prophase I: Leptotene and Zygotene are relatively short-lived compared to the next stage that is, pachytene.
- During this stage, bivalent chromosomes appear as tetrads.
- This stage is characterised by the appearance of recombination nodules the sites at which crossing over occurs between non-sister chromatids of the homologous chromosomes. Crossing over is an enzyme-mediated process and the enzyme involved is called recombinase.
- Crossing over leads to recombination of genetic material on the two chromosomes.
- Recombination between homologous chromosomes is completed by the end of pachytene, leaving the chromosomes linked at the sites of crossing over.
Diplotene:
- The initiation of diplotene is marked by the dissolution of the synaptonemal complex and the tendency of the recombined homologous chromosomes of the bivalents to separate from each other except at the sites of crossovers.
- These X-shaped structures, are called chiasmata.
| Note box: In oocytes of some vertebrates, diplotene can last for months or years. |
Diakinesis:
- The final stage of meiotic prophase I is diakinesis.
- This is marked by terminalisation of chiasmata. Terminalisation involves displacement of chiasmata along the length of the chromosomes wherein, the terminal chiasmata slips off from the ends of the chromosomes and its position is taken up by an interstitial chiasmata.
- During this phase, the chromosomes are fully condensed and the meiotic spindle is assembled to prepare the homologous chromosomes for separation.
- By the end of diakinesis, the nucleolus disappears and the nuclear envelope also breaks down.
- Diakinesis represents the transition to metaphase.
Metaphase I: The bivalent chromosomes align on the equatorial plate (Figure 10.3). The microtubules from the opposite poles of the spindle attach to the pair of homologous chromosomes.

Anaphase I: The homologous chromosomes separate, while sister chromatids remain associated at their centromeres.
Telophase I: The nuclear membrane and nucleolus reappear, cytokinesis follows and the cells so formed are called dyad of cells. In most cases, the chromosomes do undergo some dispersion at this stage but do not reach the extremely extended state of the interphase nucleus.
Interkinesis: The stage between the two meiotic divisions is called interkinesis and is generally short lived. Interkinesis is followed by prophase II, a much simpler prophase than prophase I.
10.4.2 Meiosis II

Prophase II: Meiosis II is initiated immediately after cytokinesis, usually before the chromosomes have fully elongated. In contrast to meiosis I, meiosis II resembles a normal mitosis. The nuclear membrane disappears by the end of prophase II (Figure 10.4). The chromosomes again become compact.
Metaphase II: At this stage, the chromosomes align at the equator and the microtubules from opposite poles of the spindle get attached to the kinetochores (Figure 10.4) of sister chromatids.
Anaphase II: It begins with the simultaneous splitting of the centromere of each chromosome (which was holding the sister chromatids together), allowing them to move toward opposite poles of the cell (Figure 10.4).
Telophase II: Meiosis ends with telophase II, in which the two groups of chromosomes once again get enclosed by a nuclear envelope. This is followed by cytokinesis, resulting in the formation of tetrad of cells that is, four haploid daughter cells (Figure 10.4).
Questions from section 10.4:
1. State the characteristics of meiosis. Summarize its key features.
2. Explain the stages under meiosis 1. Include the characteristics of sub stages under prophase 1.
3. Explain each of the sub stages under meiosis 2.
10.5 Significance of Meiosis
- Meiosis conserves specific chromosomal number of each species across generations in sexually reproducing organisms, even though the process results in reduction of chromosome number by half.
- It also increases the genetic variability in the population of organisms from one generation to the next. These variations are very important for evolution.
Questions from section 10.5:
1. Explain the significance of Meiosis.



