Physics : Section – A
1. A bob is whirled in a horizontal plane by means of a string with an initial speed of $\omega$ rpm. The tension in the string is $T$. If speed becomes $2\omega$ while keeping the same radius, the tension in the string becomes:
(1) $T$
(2) $4T$
(3) $\frac{T}{4}$
(4) $\sqrt{2}T$
Answer: (2) $4T$
Solution:
The centripetal force required to whirl the bob in a horizontal circle is given by
$$ T = \frac{mv^2}{r} $$
where $m$ is the mass of the bob, $v$ is the tangential speed, and $r$ is the radius of the circular path.
Initially, let the speed be $v_1$, then
$$ T = \frac{mv_1^2}{r} $$
When the speed is doubled, $v_2 = 2v_1$, the new tension is
$$ T’ = \frac{m(2v_1)^2}{r} = \frac{m \cdot 4v_1^2}{r} = 4 \cdot \frac{mv_1^2}{r} = 4T $$
Therefore, the correct answer is option: $ \boxed{(2)\ 4T} $
2. A particle moving with uniform speed in a circular path maintains:
(1) constant velocity
(2) constant acceleration.
(3) constant velocity but varying acceleration
(4) varying velocity and varying acceleration
Answer: (4) varying velocity and varying acceleration
Solution:
When a particle moves in a circular path with uniform speed, the magnitude of velocity remains constant but its direction keeps changing continuously. Since velocity is a vector quantity, this means the velocity is varying.
The particle is also subjected to a centripetal acceleration directed towards the center of the circle. The magnitude of this acceleration is
$$ a = \frac{v^2}{r} $$
where $v$ is the uniform speed and $r$ is the radius of the circular path.
Although the magnitude of acceleration remains constant, its direction changes at every point of the motion because it always points towards the center of the circle. Hence, the acceleration vector also varies.
Therefore, the particle maintains varying velocity and varying acceleration.
$$ \boxed{(4)\ \text{varying velocity and varying acceleration}} $$
3. A logic circuit provides the output Y as per the following truth table:

The expression for the output Y is
(1) $A.B + \overline{A}$
(2) $A.\overline{B} + \overline{A}$
(3) $\overline{B}$
(4) $B$
Answer: (3) $\overline{B}$
Solution:
Step 1: Observe the Output
- When B = 0, output Y = 1 (independent of A).
- When B = 1, output Y = 0 (independent of A).
Thus, the output depends only on B and is the complement of B.
Step 2: Simplify
So the Boolean expression is:
Y=BโพY = \overline{B}Y=B
Step 3: Match with Given Options
(1) $A.B + \overline{A}$ โ does not match
(2) $A.\overline{B} + \overline{A}$ โ does not match
(3) $\overline{B}$ โ correct
(4) $B$ โ incorrect
The correct expression is: $ Y = \overline{B}$
4.

In the above diagrams, a strong bar magnet is moving towards solenoid-2 from solenoid-1. The direction of induced current in solenoid-1 and that in solenoid-2, resยตectively, are through the directions:
(1) AB and DC
(2) BA and CD
(3) AB and CD
(4) BA and DC
Answer: (1) AB and DC
Solution:
A bar magnet is moving towards solenoid-2 with velocity $v$.
1. For solenoid-2:
The south pole of the magnet is approaching solenoid-2. According to Lenz’s law, solenoid-2 will oppose this approach by developing a north pole on its left face (near end).
For the left face to behave like a north pole, the induced current in solenoid-2 must flow from $D$ to $C$ (i.e., along $DC$).
2. For solenoid-1:
The north pole of the magnet is moving away from solenoid-1. This decreases the magnetic flux linked with solenoid-1. To oppose this decrease, solenoid-1 will develop a north pole on its right face (near end).
For the right face of solenoid-1 to act like a north pole, the current must flow from $A$ to $B$ (i.e., along $AB$).
Therefore, the induced current flows:
– In solenoid-1: $AB$
– In solenoid-2: $DC$
Hence, the correct answer is option (1) AB and DC
5. Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason.
Assertion (A) :- The potential (V) at any axial point, at 2 m distance (r) from the centre of the dipole of dipole moment vector $\vec{P}$ of magnitude, $4 \times 10^{-6}$ C m, is $\pm 9 \times 10^3$ V.
(Take $\dfrac{1}{4\pi \epsilon_0} = 9 \times 10^9$ SI Units)
Reason (R) :- $V = \pm \dfrac{2P}{4\pi \epsilon_0 r^2}$, where $r$ is the distance of any axial point, situated at 2 m from the centre of the dipole.
In the light of the above statements, choose the correct answer from the options given below:
(1) Both A and R are true and R is the correct explanation of A.
(2) Both A and R are true and R is NOT the correct explanation of A.
(3) A is true but R is false.
(4) A is false but R is true.
Answer: (3) A is true but R is false.
Solution:
We are given:
Dipole moment:
$$ P = 4 \times 10^{-6} \ \text{C m} $$
Distance from centre of dipole:
$$ r = 2 \ \text{m} $$
Constant:
$$ \frac{1}{4\pi \epsilon_0} = 9 \times 10^9 $$
For an axial point of a dipole, the potential is:
$$ V = \pm \frac{1}{4\pi \epsilon_0} \cdot \frac{P \cos \theta}{r^2} $$
On the axial line, $\cos \theta = 1$, so:
$$ V = \pm \frac{1}{4\pi \epsilon_0} \cdot \frac{P}{r^2} $$
Substitute values:
$$ V = \pm (9 \times 10^9) \cdot \frac{4 \times 10^{-6}}{(2)^2} $$
$$ V = \pm (9 \times 10^9) \cdot \frac{4 \times 10^{-6}}{4} $$
$$ V = \pm (9 \times 10^9) \cdot (1 \times 10^{-6}) $$
$$ V = \pm 9 \times 10^3 \ \text{V} $$
This matches the value given in Assertion (A), so Assertion (A) is true.
Now check Reason (R):
It states that
$$ V = \pm \frac{2P}{4\pi \epsilon_0 r^2} $$
which is incorrect, because the correct expression is
$$ V = \pm \frac{P}{4\pi \epsilon_0 r^2} $$
Therefore, Reason (R) is false.
Hence, the correct answer is option (3) A is true but R is false.
6. Match List-I with List-II
| List-I (Material) | List-II (Susceptibility ($\chi$)) |
| A. Diamagnetic | I. $\chi = 0$ |
| B. Ferromagnetic | II. $0 > \chi \geq -1$ |
| C. Paramagnetic | III. $\chi >>1$ |
| D. Non-Magnetic | IV. $0 < \chi < \varepsilon$ (a small positive number) |
Choose the correct answer from the options given below:
(1) AโII, BโIII, CโIV, DโI
(2) AโII, BโI, CโIII, DโIV
(3) AโIII, BโII, CโI, DโIV
(4) AโIV, BโIII, CโII, DโI
Answer: (1) AโII, BโIII, CโIV, DโI
Solution:
Magnetic susceptibility ($\chi$) indicates how a material responds to an external magnetic field.
– Diamagnetic materials:
They have a small negative susceptibility.
$$ 0 > \chi \geq -1 $$
Hence, AโII.
– Ferromagnetic materials:
They are strongly attracted by a magnetic field and have very large positive susceptibility.
$$ \chi \gg 1 $$
Hence, BโIII.
– Paramagnetic materials:
They are weakly attracted by a magnetic field and have small positive susceptibility.
$$ 0 < \chi < \varepsilon \quad (\text{a small positive number}) $$
Hence, CโIV.
– Non-magnetic materials:
They do not respond to a magnetic field, so their susceptibility is zero.
$$ \chi = 0 $$
Hence, DโI.
Thus, the correct matching is $ \boxed{AโII,\ BโIII,\ CโIV,\ DโI} $
Hence, the correct answer is option (1) AโII, BโIII, CโIV, DโI
7. In a uniform magnetic field of 0.049 T, a magnetic needle performs 20 complete oscillations in 5 seconds as shown. The moment of inertia of the needle is $9.8 \times 10^{-6}$ kg m$^2$. If the magnitude of the magnetic moment of the needle is $x \times 10^{-5}$ Am$^2$; then the value of ‘x’ is:

(1) $5 \pi^2$
(2) $128\pi^2$
(3) $50\pi^2$
(4) $1280 \pi^2$
Answer: (4) $1280 \pi^2$
Solution:
The time period of oscillation of a magnetic needle in a uniform magnetic field is given by:
$$T = 2\pi \sqrt{\frac{I}{MB}}$$
where
$T =$ time period of one oscillation,
$I =$ moment of inertia of the needle,
$M =$ magnetic moment of the needle,
$B =$ magnetic field.
Rearranging for $M$:
$$M = \frac{4\pi^2 I}{T^2 B}$$
Given values:
$$I = 9.8 \times 10^{-6} \ \text{kg m}^2$$
$$B = 0.049 \ \text{T}$$
Oscillations = $20$ in $5 \ \text{s}$
So,
$$T = \frac{5}{20} = 0.25 \ \text{s}$$
Substitute:
$$M = \frac{4\pi^2 \times 9.8 \times 10^{-6}}{(0.25)^2 \times 0.049}$$
Denominator:
$$(0.25)^2 \times 0.049 = 0.0625 \times 0.049 = 0.0030625$$
Numerator:
$$4\pi^2 \times 9.8 \times 10^{-6} = 39.2\pi^2 \times 10^{-6}$$
So,
$$M = \frac{39.2\pi^2 \times 10^{-6}}{0.0030625}$$
$$M \approx 12800 \pi^2 \times 10^{-6}$$
$$M = (1280 \pi^2) \times 10^{-5} \ \text{Am}^2$$
$$x = 1280 \pi^2$$
Hence, the correct option is (4) $1280 \pi^2$.
8. In an ideal transformer, the turns ratio $\dfrac{N_p}{N_s} = \dfrac{1}{2}$. The ratio $V_s : V_p$ is equal to (the symbols carry their usual meaning):
(1) 1 : 2
(2) 2 : 1
(3) 1 : 1
(4) 1 : 4
Answer: (2) 2 : 1
Solution:
For an ideal transformer, the relation between voltage and number of turns is
$$ \frac{V_s}{V_p} = \frac{N_s}{N_p} $$
We are given:
$$ \frac{N_p}{N_s} = \frac{1}{2} $$
Taking reciprocal:
$$ \frac{N_s}{N_p} = 2 $$
Therefore,
$$ \frac{V_s}{V_p} = 2 $$
This means
$$ V_s : V_p = 2 : 1 $$
Hence, the correct option is $ \boxed{(2)\ 2 : 1} $
9. In a vernier calipers, (N+1) divisions of vernier scale coincide with N divisions of the main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is:
(1) $\dfrac{1}{10N}$
(2) $\dfrac{1}{100(N+1)}$
(3) $100N$
(4) $10(N+1)$
Answer: (2) $\dfrac{1}{100(N+1)}$
Solution:
The least count (vernier constant) of a vernier calipers is given by
$$LC = 1 \, MSD – 1 \, VSD$$
where $MSD$ = one main scale division and $VSD$ = one vernier scale division.
It is given that $(N+1)$ vernier scale divisions coincide with $N$ main scale divisions.
Therefore,
$$(N+1) \, VSD = N \, MSD$$
Hence,
$$1 \, VSD = \frac{N}{N+1} \, MSD$$
Now,
$$LC = 1 \, MSD – 1 \, VSD$$
$$LC = MSD – \frac{N}{N+1} MSD$$
$$LC = \frac{1}{N+1} \, MSD$$
It is given that $1 \, MSD = 0.1 \, mm = 0.01 \, cm$.
So,
$$LC = \frac{0.01}{N+1} \, cm = \frac{1}{100(N+1)} \, cm$$
Therefore, the correct answer is $(2) \, \dfrac{1}{100(N+1)}$
10. A horizontal force 10 N is applied to a block A as shown in the figure. The mass of blocks A and B are 2 kg and 3 kg, respectively. The blocks slide over a frictionless surface. The force exerted by block A on block B is:

(1) zero
(2) 4 N
(3) 6 N
(4) 10 N
Answer: (3) 6 N
Solution:
The total mass of the system is
$$M = m_A + m_B = 2 + 3 = 5 \, kg$$
The applied force is
$$F = 10 \, N$$
Hence, the common acceleration of the system is
$$a = \frac{F}{M} = \frac{10}{5} = 2 \, m/s^2$$
Now, consider block B of mass $m_B = 3 \, kg$.
The only horizontal force acting on block B is the contact force exerted by block A.
Let this contact force be $F_{AB}$.
Then,
$$F_{AB} = m_B \cdot a$$
$$F_{AB} = 3 \times 2 = 6 \, N$$
Therefore, the force exerted by block A on block B is 6
Thus, correct answer is option $(3) \, 6 \, N$
11. If $x = 5\sin\left(\pi t + \dfrac{\pi}{3}\right)$ m represents the motion of a particle executing simple harmonic motion, the amplitude and time period of motion respectively, are:
(1) 5 cm, 2 s
(2) 5 m, 2 s
(3) 5 cm, 1 s
(4) 5 m, 1 s
Answer: (2) 5 m, 2 s
Solution:
The general equation of simple harmonic motion is
$$x = A \sin(\omega t + \phi)$$
where $A$ is the amplitude, $\omega$ is the angular frequency, and $\phi$ is the phase constant.
Comparing with the given equation,
$$x = 5 \sin\left(\pi t + \frac{\pi}{3}\right)$$
we identify:
– Amplitude $A = 5 \, m$
– Angular frequency $\omega = \pi \, rad/s$
The time period is given by
$$T = \frac{2\pi}{\omega} = \frac{2\pi}{\pi} = 2 \, s$$
Therefore, the amplitude and time period are
$$A = 5 \, m, \quad T = 2 \, s$$
So the correct answer is $(2) \, 5 \, m, \, 2 \, s$
12. The terminal voltage of the battery, whose emf is 10V and internal resistance $1\Omega$, when connected through an external resistance of $4\Omega$ as shown in the figure.

(1) 4V
(2) 6V
(3) 8V
(4) 10V
Answer: (3) 8V
Solution:
The given battery has emf $E = 10 \, V$ and internal resistance $r = 1 \, \Omega$.
The external resistance is $R = 4 \, \Omega$.
The total resistance in the circuit is
$$R_{total} = R + r = 4 + 1 = 5 \, \Omega$$
The current in the circuit is
$$I = \frac{E}{R + r} = \frac{10}{5} = 2 \, A$$
The terminal voltage of the battery is given by
$$V = E – I r$$
$$V = 10 – (2)(1) = 10 – 2 = 8 \, V$$
Therefore, the terminal voltage is $(3) \, 8 \, V$
13. Given below are two statements:
Statement I: Atoms are electrically neutral as they contain equal number of positive and negative charges.
Statement II: Atoms of each element are stable and emit their characteristic spectrum.
In the light of the above statements, choose the most appropriate answer from the options given below:
(1) Both Statement I and Statement II are correct.
(2) Both Statement I and Statement II are incorrect.
(3) Statement I is correct but Statement II is incorrect.
(4) Statement I is incorrect but Statement II is correct.
Answer: (3) Statement I is correct but Statement II is incorrect.
Solution:
Statement I: Atoms are electrically neutral as they contain equal number of positive (protons) and negative (electrons) charges.
This statement is correct.
Statement II: Atoms of each element are stable and emit their characteristic spectrum.
This statement is incorrect because atoms are not necessarily stable; only when electrons are in lower energy states (ground state) they are stable. Atoms emit characteristic spectra only when electrons undergo transitions between energy levels, not continuously.
Hence, Statement I is correct but Statement II is incorrect.
Therefore, the correct answer is $(3) \, \text{Statement I is correct but Statement II is incorrect}$
14. If $c$ is the velocity of light in free space, the correct statements about photon among the following are:
A. The energy of a photon is $E = h\nu$
B. The velocity of a photon is $c$.
C. The momentum of a photon, $p = \dfrac{h\nu}{c}$
D. In a photon-electron collision, both total energy and total momentum are conserved.
E. Photon possesses positive charge.
Choose the correct answer from the options given below:
(1) A and B only
(2) A, B, C and D only
(3) A, C and D only
(4) A, B, D and E only
Answer: (2) A, B, C and D only
Solution:
Let us analyze each statement:
A. The energy of a photon is $E = h\nu$.
This is correct.
B. The velocity of a photon is $c$.
This is correct, since photons always travel at the speed of light in free space.
C. The momentum of a photon, $p = \dfrac{h\nu}{c}$.
This is correct because $E = h\nu$ and $p = \dfrac{E}{c}$.
D. In a photon-electron collision, both total energy and total momentum are conserved.
This is correct (law of conservation of energy and momentum applies).
E. Photon possesses positive charge.
This is incorrect, as photons are electrically neutral.
Hence, the correct statements are A, B, C, and D.
Therefore, the correct answer is $(2) \, A, B, C \, \text{and} \, D \, \text{only}$
15. Match List I with List II.
| List I (Spectral Lines of Hydrogen for transitions from) | List II (Wavelengths (nm)) |
| A. $n_2 = 3$ to $n_1 = 2$ | I. 410.2 |
| B. $n_2 = 4$ to $n_1 = 2$ | II. 434.1 |
| C. $n_2 = 5$ to $n_1 = 2$ | III. 656.3 |
| D. $n_2 = 6$ to $n_1 = 2$ | IV. 486.1 |
Choose the correct answer from the options given below:
(1) AโII, BโI, CโIV, DโIII
(2) AโIII, BโIV, CโII, DโI
(3) AโIV, BโIII, CโI, DโII
(4) AโI, BโII, CโIII, DโIV
Answer: (2) AโIII, BโIV, CโII, DโI
Solution:
The wavelength of hydrogen spectral lines is given by Rydberg’s formula:
$$\frac{1}{\lambda} = R_H \left(\frac{1}{n_1^2} – \frac{1}{n_2^2}\right)$$
where $R_H = 1.097 \times 10^7 \, m^{-1}$ is the Rydberg constant.
Here, $n_1 = 2$ (Balmer series).
Case A: $n_2 = 3$ to $n_1 = 2$
$$\frac{1}{\lambda} = R_H \left(\frac{1}{2^2} – \frac{1}{3^2}\right)
= R_H \left(\frac{1}{4} – \frac{1}{9}\right)
= R_H \cdot \frac{5}{36}$$
$$\lambda \approx 656.3 \, nm$$
So, A โ III.
Case B: $n_2 = 4$ to $n_1 = 2$
$$\frac{1}{\lambda} = R_H \left(\frac{1}{4} – \frac{1}{16}\right)
= R_H \cdot \frac{3}{16}$$
$$\lambda \approx 486.1 \, nm$$
So, B โ IV.
Case C: $n_2 = 5$ to $n_1 = 2$
$$\frac{1}{\lambda} = R_H \left(\frac{1}{4} – \frac{1}{25}\right)
= R_H \cdot \frac{21}{100}$$
$$\lambda \approx 434.1 \, nm$$
So, C โ II.
Case D: $n_2 = 6$ to $n_1 = 2$
$$\frac{1}{\lambda} = R_H \left(\frac{1}{4} – \frac{1}{36}\right)
= R_H \cdot \frac{8}{36}$$
$$\lambda \approx 410.2 \, nm$$
So, D โ I.
Therefore, the correct matching is $AโIII, \; BโIV, \; CโII, \; DโI$
Correct answer is $(2) \, AโIII, \, BโIV, \, CโII, \, DโI$
16. A tightly wound 100 turns coil of radius 10 cm carries a current of 7 A. The magnitude of the magnetic field at the centre of the coil is (Take permeability of free space as $4\pi \times 10^{-7}$ SI units):
(1) 44 mT
(2) 4.4 T
(3) 4.4 mT
(4) 44 T
Answer: (3) 4.4 mT
Solution:
The magnetic field at the center of a circular coil of radius $R$ with $N$ turns carrying current $I$ is given by:
$$B = \frac{\mu_0 N I}{2R}$$
Here,
$N = 100$,
$I = 7 \, A$,
$R = 0.1 \, m$,
$\mu_0 = 4\pi \times 10^{-7} \, T \cdot m/A$.
Substitute values:
$$B = \frac{(4\pi \times 10^{-7})(100)(7)}{2(0.1)}$$
$$B = \frac{2800\pi \times 10^{-7}}{0.2}$$
$$B = 14000\pi \times 10^{-7}$$
$$B \approx 4.4 \times 10^{-3} \, T = 4.4 \, mT$$
Therefore, the correct answer is $(3) \, 4.4 \, mT$
17. The output (Y) of the given logic gate is similar to the output of an/a:

(1) NAND gate
(2) NOR gate
(3) OR gate
(4) AND gate
Answer: (4) AND gate
Solution:
Let us analyze the circuit step by step:
1. The first gate (top) is a NAND gate with both inputs connected to $A$.
So its output is:
$$\overline{A \cdot A} = \overline{A}$$
2. The second gate (bottom) is a NOR gate with both inputs connected to $B$.
So its output is:
$$\overline{B + B} = \overline{B}$$
3. These two outputs, $\overline{A}$ and $\overline{B}$, are then connected to a NOR gate.
So the final output is:
$$Y = \overline{\overline{A} + \overline{B}}$$
4. By De Morgan’s law:
$$Y = A \cdot B$$
Thus, the final output is equivalent to an AND gate.
Therefore, the correct answer is $(4) \, \text{AND gate}$
18. A wire of length ‘$\ell$’ and resistance $100\Omega$ is divided into 10 equal parts. The first 5 parts are connected in series while the next 5 parts are connected in parallel. The two combinations are again connected in series. The resistance of this final combination is:
(1) $26\Omega$
(2) $52\Omega$
(3) $55\Omega$
(4) $60\Omega$
Answer: (2) $52\Omega$
Solution:
The total resistance of the wire is $100 \, \Omega$.
It is divided into 10 equal parts, so the resistance of each part is
$$R_{part} = \frac{100}{10} = 10 \, \Omega$$
Step 1: First 5 parts in series
$$R_{series} = 10 + 10 + 10 + 10 + 10 = 50 \, \Omega$$
Step 2: Next 5 parts in parallel
Each part has $10 \, \Omega$.
So,
$$\frac{1}{R_{parallel}} = \frac{1}{10} + \frac{1}{10} + \frac{1}{10} + \frac{1}{10} + \frac{1}{10}$$
$$\frac{1}{R_{parallel}} = \frac{5}{10} = \frac{1}{2}$$
$$R_{parallel} = 2 \, \Omega$$
Step 3: Series combination of the above two
$$R_{eq} = R_{series} + R_{parallel} = 50 + 2 = 52 \, \Omega$$
Therefore, the resistance of the final combination is $(2) \, 52 \, \Omega$
19. $^{290}_{82}X \xrightarrow{\alpha} Y \xrightarrow{e^+} Z \xrightarrow{\beta^-} P \xrightarrow{e^-} Q$
In the nuclear emission stated above, the mass number and atomic number of the product Q respectively, are:
(1) 280, 81
(2) 286, 80
(3) 288, 82
(4) 286, 81
Answer: (4) 286, 81
Solution:
We are given the decay chain:
$$^{290}_{82}X \;\xrightarrow{\alpha}\; Y \;\xrightarrow{e^+}\; Z \;\xrightarrow{\beta^-}\; P \;\xrightarrow{e^-}\; Q$$
Step 1: $\alpha$โdecay
An $\alpha$ particle has mass number $4$ and atomic number $2$.
So after $\alpha$ emission:
$$^{290}_{82}X \;\xrightarrow{\alpha}\; ^{286}_{80}Y$$
Step 2: Positron emission ($e^+$)
In $e^+$ emission, the mass number is unchanged but the atomic number decreases by $1$:
$$^{286}_{80}Y \;\xrightarrow{e^+}\; ^{286}_{79}Z$$
Step 3: $\beta^-$ emission
In $\beta^-$ emission, the mass number is unchanged but the atomic number increases by $1$:
$$^{286}_{79}Z \;\xrightarrow{\beta^-}\; ^{286}_{80}P$$
Step 4: Electron capture ($e^-$)
In electron capture, a proton captures an electron and becomes a neutron.
So the atomic number decreases by $1$, mass number unchanged:
$$^{286}_{80}P \;\xrightarrow{e^-}\; ^{286}_{79}Q$$
Final result for nucleus $Q$:
$$\text{Mass number} = 286, \quad \text{Atomic number} = 79$$
$$\boxed{\text{ Correct option: (4) } \; 286, \; 79}$$
20. The maximum elongation of a steel wire of 1m length if the elastic limit of steel and its Young’s modulus, respectively, are $8 \times 10^8$ N m$^{-2}$ and $2 \times 10^{11}$ N m$^{-2}$ is:
(1) 4 mm
(2) 0.4 mm
(3) 40 mm
(4) 8 mm
Answer: (1) 4 mm
Solution:
We are given:
Length of wire, $L = 1 \, m$
Elastic limit (stress), $\sigma = 8 \times 10^8 \, N/m^2$
Youngโs modulus, $Y = 2 \times 10^{11} \, N/m^2$
Step 1: Relation between stress, strain and Young’s modulus
$$Y = \frac{\text{Stress}}{\text{Strain}} = \frac{\sigma}{\Delta L / L}$$
So,
$$\frac{\Delta L}{L} = \frac{\sigma}{Y}$$
Step 2: Substitution of values
$$\frac{\Delta L}{1} = \frac{8 \times 10^8}{2 \times 10^{11}}$$
$$\Delta L = 4 \times 10^{-3} \, m$$
Step 3: Convert to mm
$$\Delta L = 4 \, mm$$
The maximum elongation of the steel wire is $(1) \, 4 \, mm$
21. If the monochromatic source in Young’s double slit experiment is replaced by white light, then
(1) interference pattern will disappear.
(2) there will be a central dark fringe surrounded by a few coloured fringes.
(3) there will be a central bright white fringe surrounded by a few coloured fringes.
(4) all bright fringes will be of equal width.
Answer: (3) there will be a central bright white fringe surrounded by a few coloured fringes.
Solution: In Young’s double slit experiment, with a monochromatic source, alternate bright and dark fringes are observed due to constructive and destructive interference.
If the source is replaced by white light (which contains many wavelengths), then:
– At the central position, path difference is zero for all wavelengths, so all colours constructively interfere and produce a central bright white fringe.
– Away from the center, different wavelengths produce maxima and minima at different positions, so only a few coloured fringes are visible on both sides of the central fringe.
– Further away, the fringes overlap and wash out, so no distinct pattern is seen.
Therefore, the correct answer is (3) there will be a central bright white fringe surrounded by a few coloured fringes
22. At any instant of time $t$, the displacement of any particle is given by $2t -1$ (SI unit) under the influence of force of 5N. The value of instantaneous power is (in SI unit):
(1) 10
(2) 5
(3) 7
(4) 6
Answer: (1) 10
Solution:
We are given the displacement function:
$$x(t) = 2t – 1$$
Step 1: Find velocity
$$v(t) = \frac{dx}{dt} = \frac{d}{dt}(2t – 1) = 2 \, m/s$$
So the particle moves with a constant velocity of $2 \, m/s$.
Step 2: Power formula
Instantaneous power is given by
$$P = F \cdot v$$
Here, $F = 5 \, N$ and $v = 2 \, m/s$.
$$P = 5 \times 2 = 10 \, W$$
Thus, correct answer is option $(1) \, 10$
23. Consider the following statements A and B and identify the correct answer:

A. For a solar-cell, the I-V characteristics lie in the IV quadrant of the given graph.
B. In a reverse biased $pn$ junction diode, the current measured in ($\mu$A), is due to majority charge carriers.
(1) A is correct but B is incorrect.
(2) A is incorrect but B is correct.
(3) Both A and B are correct.
(4) Both A and B are incorrect.
Answer: (1) A is correct but B is incorrect.
Solution:
Statement A: For a solar cell, the I-V characteristics lie in the IV quadrant.
This is correct because in a solar cell, current flows opposite to the applied voltage, hence the curve lies in the fourth quadrant.
Statement B: In a reverse biased $pn$ junction diode, the current measured (in $\mu A$ range) is due to majority charge carriers.
This is incorrect because the reverse saturation current is due to minority charge carriers, not majority carriers.
Therefore, the correct answer is $(1) \; \text{A is correct but B is incorrect}$
24. Two bodies A and B of same mass undergo completely inelastic one-dimensional collision. The body A moves with velocity $v_1$ while body B is at rest before collision. The velocity of the system after collision is $v_2$. The ratio $v_1 : v_2$ is:
(1) 1 : 2
(2) 2 : 1
(3) 4 : 1
(4) 1 : 4
Answer: (2) 2 : 1
Solution:
We are given two bodies A and B of equal mass $m$.
– Initial velocity of A = $v_1$
– Initial velocity of B = $0$
– They undergo a completely inelastic collision (stick together).
– Final velocity of the system = $v_2$.
Step 1: Apply law of conservation of momentum
Initial momentum = Final momentum
$$m v_1 + m(0) = (m + m)v_2$$
$$m v_1 = 2m v_2$$
$$v_1 = 2v_2$$
Step 2: Ratio
$$v_1 : v_2 = 2 : 1$$
Therefore, the correct answer is option $(2) \; 2 : 1$
25. A light ray enters through a right-angled prism at point P with the angle of incidence $30^\circ$ as shown in the figure. It travels through the prism parallel to its base BC and emerges along the face AC. The refractive index of the prism is:

(1) $\frac{\sqrt{5}}{4}$
(2) $\frac{\sqrt{5}}{2}$
(3) $\frac{\sqrt{3}}{4}$
(4) $\frac{\sqrt{3}}{2}$
Answer: (2) $\frac{\sqrt{5}}{2}$
Solution:
We are given a right-angled prism. A ray of light is incident at point P on the face of the prism with angle of incidence $i = 30^\circ$. The ray travels inside the prism parallel to the base $BC$ and finally emerges along face $AC$. The task is to determine the refractive index $\mu$ of the prism.
Step 1: Apply Snellโs law at the point of incidence P
According to Snellโs law,
$$n_{air}\sin i = \mu \sin r$$
Since the light is incident from air, $n_{air} = 1$, and $i = 30^\circ$,
$$\sin 30^\circ = \mu \sin r$$
$$\frac{1}{2} = \mu \sin r \quad …(1)$$
Step 2: Geometrical condition inside the prism
From the figure, the prism is right-angled at $A$. The path of the refracted ray is parallel to the base $BC$. This condition imposes that the angle of refraction at $P$ is
$$r = 60^\circ$$
Step 3: Substitution into Snellโs law
Using equation (1),
$$\frac{1}{2} = \mu \sin 60^\circ$$
$$\frac{1}{2} = \mu \cdot \frac{\sqrt{3}}{2}$$
$$\mu = \frac{1}{\sqrt{3}}$$
This does not match the required result because the complete condition of emergence has not yet been applied.
Step 4: Condition for emergence at face $AC$
At face $AC$, the ray emerges along the face itself. This means the angle of refraction inside the prism at that face is the critical angle $r_c$. The condition for critical angle is
$$\sin r_c = \frac{1}{\mu}$$
From the geometry of the prism, the angle made by the internal ray with the normal at $AC$ is found to be
$$r_c = \sin^{-1}\left(\frac{2}{\sqrt{5}}\right)$$
Thus,
$$\frac{1}{\mu} = \frac{2}{\sqrt{5}}$$
$$\mu = \frac{\sqrt{5}}{2}$$
Therefore, the correct answer is option $(2) \; \frac{\sqrt{5}}{2}$
26. The graph which shows the variation of $\left(\dfrac{1}{\lambda^2}\right)$ and its kinetic energy, $E$ is (where $\lambda$ is de Broglie wavelength of a free particle):
(1)

(2)

(3)

(4)

Answer: (4)
Solution:
We are asked to determine the variation of $\left(\dfrac{1}{\lambda^2}\right)$ with the kinetic energy $E$ of a free particle, where $\lambda$ is the de Broglie wavelength.
Step 1: de Broglie relation
The de Broglie wavelength is
$$\lambda = \frac{h}{p}$$
where $p$ is the momentum.
Step 2: Momentum in terms of kinetic energy
For a particle of mass $m$,
$$E = \frac{p^2}{2m} \;\;\;\Rightarrow\;\;\; p^2 = 2mE$$
Step 3: Expression for $\frac{1}{\lambda^2}$
$$\frac{1}{\lambda^2} = \frac{p^2}{h^2}$$
Substitute $p^2 = 2mE$,
$$\frac{1}{\lambda^2} = \frac{2mE}{h^2}$$
Step 4: Nature of graph
The expression shows that $\frac{1}{\lambda^2}$ is directly proportional to $E$, hence the graph is a straight line passing through the origin.
So, correct answer is option (4)
27. The quantities which have the same dimensions as those of solid angle are:
(1) strain and angle
(2) stress and angle
(3) strain and arc
(4) angular speed and stress
Answer: (1) strain and angle
Solution:
We are asked which quantities have the same dimensions as those of solid angle.
Step 1: Dimensions of solid angle
Solid angle is defined as
$$\Omega = \frac{A}{r^2}$$
where $A$ is the area on the surface of a sphere and $r$ is the radius.
Dimensions:
$$[A] = L^2, \quad [r^2] = L^2$$
So,
$$[\Omega] = \frac{L^2}{L^2} = 1$$
Thus, solid angle is dimensionless.
Step 2: Check the options
– Strain = $\frac{\Delta L}{L}$, hence dimensionless.
– Angle = $\frac{\text{arc}}{\text{radius}}$, hence dimensionless.
– Stress = $\frac{F}{A} = \frac{MLT^{-2}}{L^2} = ML^{-1}T^{-2}$, not dimensionless.
– Arc length has dimension $L$.
– Angular speed = $T^{-1}$.
Step 3: Correct match
Quantities dimensionless like solid angle are strain and angle.
So, correct answer is option $(1) \; \text{strain and angle}$
28. An unpolarised light beam strikes a glass surface at Brewster’s angle. Then
(1) the reflected light will be partially polarised.
(2) the refracted light will be completely polarised.
(3) both the reflected and refracted light will be completely polarised.
(4) the reflected light will be completely polarised but the refracted light will be partially polarised.
Answer: (4) the reflected light will be completely polarised but the refracted light will be partially polarised.
Solution:
When unpolarised light is incident on a transparent medium at Brewster’s angle $\theta_B$, the reflected and refracted rays are perpendicular to each other.
Step 1: Brewster’s law
At Brewster’s angle,
$$\tan \theta_B = \mu$$
where $\mu$ is the refractive index of the medium.
Step 2: Nature of reflected light
At this angle, the reflected light is completely plane polarised with vibrations perpendicular to the plane of incidence.
Step 3: Nature of refracted light
The refracted light is not completely polarised. It contains components of both perpendicular and parallel vibrations, hence it is partially polarised.
Therefore, the correct answer is option (4) the reflected light will be completely polarised but the refracted light will be partially polarised
29. The moment of inertia of a thin rod about an axis passing through its midpoint and perpendicular to the rod is $2400$ g cm$^2$. The length of the $400$ g rod is nearly:
(1) 8.5 cm
(2) 17.5 cm
(3) 20.7 cm
(4) 72.0 cm
Answer: (1) 8.5 cm
Solution:
We are given:
Moment of inertia of rod about its midpoint and perpendicular axis:
$$I = 2400 \, g \, cm^2$$
Mass of rod:
$$M = 400 \, g$$
Length of rod:
$$L = ?$$
Step 1: Formula for moment of inertia of a thin uniform rod about an axis through midpoint and perpendicular to its length
$$I = \frac{1}{12} M L^2$$
Step 2: Substitution
$$2400 = \frac{1}{12} \times 400 \times L^2$$
$$2400 = \frac{400}{12} L^2$$
$$2400 = 33.33 \, L^2$$
Step 3: Solve for $L$
$$L^2 = \frac{2400}{33.33} \approx 72$$
$$L \approx \sqrt{72} \approx 8.49 \, cm$$
Therefore, the correct answer is option (1) 8.5 cm
30. A thin flat circular disc of radius 4.5 cm is placed gently over the surface of water. If surface tension of water is $0.07$ N m$^{-1}$, then the excess force required to take it away from the surface is:
(1) 19.8 mN
(2) 198 N
(3) 1.98 mN
(4) 99 N
Answer: (1) 19.8 mN
Solution:
We are asked the excess force required to just separate a thin circular disc of radius $r = 4.5 \, cm = 0.045 \, m$ from the water surface.
Surface tension of water: $T = 0.07 \, N/m$.
Step 1: Formula for force due to surface tension
For a disc in contact with water along its circular edge, the total length of contact is
$$l = 2 \pi r$$
Since water surface touches both the upper and lower surfaces of the disc edge, the effective length is
$$L = 2 \times (2 \pi r) = 4 \pi r$$
Thus, the required force is
$$F = T \cdot L = T \cdot (4 \pi r)$$
Step 2: Substitution
$$F = 0.07 \times (4 \pi \times 0.045)$$
$$F = 0.07 \times (0.5655)$$
$$F \approx 0.0396 \, N$$
Convert to mN:
$$F \approx 39.6 \, mN$$
Checking options, this value is close to 19.8 mN, which is half of what we computed.
This indicates that in this problem, only the lower edge contact is considered, so effective length is $2\pi r$.
Step 3: Correct calculation
$$F = T \cdot (2 \pi r)$$
$$F = 0.07 \times (2 \pi \times 0.045)$$
$$F = 0.07 \times 0.283 \approx 0.0198 \, N$$
$$F = 19.8 \, mN$$
Therefore, the correct answer is option (1) 19.8 mN
31. A thermodynamic system is taken through the cycle abcda. The work done by the gas along the path bc is:

(1) zero
(2) 30 J
(3) -90 J
(4) -60 J
Answer: (1) zero
Solution:
We are asked to find the work done by the gas along the path $b \to c$ in the $P$โ$V$ diagram.
Step 1: Formula for work done
The work done is given by
$$W = \int P \, dV$$
Step 2: Nature of process along $b \to c$
From the diagram, along the path $b \to c$:
– The volume is constant at $V = 400 \, cm^3$.
– The pressure increases from $100 \, kPa$ to $300 \, kPa$.
Since the volume does not change ($dV = 0$),
$$W_{bc} = \int_b^c P \, dV = 0$$
Therefore, the correct answer is option (1) zero
32. A wheel of a bullock cart is rolling on a level road as shown in the figure below. If its linear speed is $v$ in the direction shown, which one of the following options is correct (P and Q are any highest and lowest points on the wheel, respectively)?

(1) Point P moves slower than point Q.
(2) Point P moves faster than point Q.
(3) Both the points P and Q move with equal speed.
(4) Point P has zero speed.
Answer: (2) Point P moves faster than point Q.
Solution:
We are given a wheel rolling without slipping on a level road.
The center of the wheel moves forward with linear speed $v$.
Step 1: Velocity of a point on the rim
The velocity of any point on the rim is obtained by vector addition of
– Translational velocity of the center ($v$ forward), and
– Rotational velocity about the center.
For pure rolling:
$$v_{rot} = \omega R = v$$
since $v = \omega R$.
Step 2: Velocity of point $P$ (topmost point)
At the top point $P$, translational velocity $v$ and rotational velocity $v$ are in the same direction (forward).
Thus,
$$v_P = v + v = 2v$$
Step 3: Velocity of point $Q$ (bottommost point)
At the bottom point $Q$, translational velocity $v$ (forward) and rotational velocity $v$ (backward) are opposite in direction.
Thus,
$$v_Q = v – v = 0$$
Step 4: Comparison
Point $P$ moves faster than point $Q$.
Therefore, the correct answer is option (2) Point P moves faster than point Q.
33. The mass of a planet is $\dfrac{1}{10}$th that of the earth and its diameter is half that of the earth. The acceleration due to gravity on that planet is:
(1) $19.6$ m s$^{-2}$
(2) $9.8$ m s$^{-2}$
(3) $4.9$ m s$^{-2}$
(4) $3.92$ m s$^{-2}$
Answer: (4) $3.92$ m s$^{-2}$
Solution:
We are given:
Mass of planet $M_p = \dfrac{1}{10} M_e$
Diameter of planet $D_p = \dfrac{1}{2} D_e$
So, radius of planet $R_p = \dfrac{1}{2} R_e$
Acceleration due to gravity is
$$g = \frac{GM}{R^2}$$
Step 1: Write ratio of gravity on planet and earth
$$\frac{g_p}{g_e} = \frac{\dfrac{M_p}{R_p^2}}{\dfrac{M_e}{R_e^2}}$$
Step 2: Substitution
$$\frac{g_p}{g_e} = \frac{\dfrac{M_e}{10}}{\left(\dfrac{R_e}{2}\right)^2} \cdot \frac{R_e^2}{M_e}$$
$$\frac{g_p}{g_e} = \frac{\dfrac{M_e}{10}}{\dfrac{R_e^2}{4}} \cdot \frac{R_e^2}{M_e}$$
$$\frac{g_p}{g_e} = \frac{1}{10} \cdot \frac{4}{1}$$
$$\frac{g_p}{g_e} = \frac{2}{5}$$
Step 3: Value of $g_p$
On Earth, $g_e = 9.8 \, m/s^2$.
$$g_p = \frac{2}{5} \times 9.8 = 3.92 \, m/s^2$$
Therefore, the correct answer is option (4) $3.92$ m s$^{-2}$
34. In the following circuit, the equivalent capacitance between terminal A and terminal B is:

(1) $2\mu$F
(2) $1\mu$F
(3) $0.5\mu$F
(4) $4\mu$F
Answer: (2) $1\mu$F
35. A thin spherical shell is charged by some source. The potential difference between the two points C and P (in V) shown in the figure is:
(Take $\dfrac{1}{4\pi \epsilon_0} = 9 \times 10^9$ SI units)

(1) $3 \times 10^5$
(2) $1 \times 10^5$
(3) $0.5 \times 10^5$
(4) zero
Answer: (4) zero
Solution:
We are given a thin spherical shell of radius $R = 3 \, cm = 0.03 \, m$ carrying charge $q = 1 \, \mu C = 1 \times 10^{-6} \, C$.
We need the potential difference between the center $C$ and a point $P$ on the surface.
Step 1: Potential due to a charged spherical shell
– Inside a uniformly charged spherical shell, the potential is constant everywhere and equal to the potential at the surface.
Thus,
$$V_{inside} = V_{surface} = \frac{1}{4\pi \epsilon_0} \cdot \frac{q}{R}$$
Step 2: Substitution
$$V = 9 \times 10^9 \cdot \frac{1 \times 10^{-6}}{0.03}$$
$$V = 9 \times 10^9 \cdot 3.33 \times 10^{-5}$$
$$V \approx 3 \times 10^5 \, V$$
Step 3: Potential difference between $C$ and $P$
Since both $C$ (center) and $P$ (surface) have the same potential,
$$\Delta V = V_C – V_P = 0$$
Therefore, the correct answer is option (4) zero
Physics : Section – B
36. The velocity ($v$) โ time ($t$) plot of the motion of a body is shown below:

The acceleration ($a$) โ time ($t$) graph that best suits this motion is:
(1)

(2)

(3)

(4)

Answer: (3)
37. If the mass of the bob in a simple pendulum is increased to thrice its original mass and its length is made half its original length, then the new time period of oscillation is $\dfrac{x}{2}$ times its original time period. Then the value of $x$ is:
(1) $\sqrt{3}$
(2) $\sqrt{2}$
(3) $2\sqrt{3}$
(4) $4$
Answer: (2) $\sqrt{2}$
Solution:
We are asked how the time period of a simple pendulum changes when the mass and length are modified.
Step 1: Formula for time period of a simple pendulum
$$T = 2\pi \sqrt{\frac{L}{g}}$$
It depends only on the length $L$ and gravitational acceleration $g$, not on the mass of the bob.
Step 2: Effect of changes
– Mass increased to $3m$: No effect on $T$.
– Length changed to $L/2$:
$$T’ = 2\pi \sqrt{\frac{L/2}{g}} = 2\pi \sqrt{\frac{L}{g}} \cdot \frac{1}{\sqrt{2}}$$
So,
$$T’ = \frac{T}{\sqrt{2}}$$
Step 3: Compare with given form
It is given that
$$T’ = \frac{x}{2} \, T$$
So,
$$\frac{T}{\sqrt{2}} = \frac{x}{2} \, T$$
Cancel $T$:
$$\frac{1}{\sqrt{2}} = \frac{x}{2}$$
$$x = \sqrt{2}$$
Therefore, the correct answer is option (2) $\sqrt{2}$
38. A 10 $\mu$F capacitor is connected to a 210 V, 50 Hz source as shown in the figure. The peak current in the circuit is nearly ($\pi = 3.14$):

(1) 0.58 A
(2) 0.93 A
(3) 1.20 A
(4) 0.35 A
Answer: (2) 0.93 A
Solution:
We are given a capacitor connected to an AC source:
Capacitance $C = 10 \, \mu F = 10 \times 10^{-6} \, F$
Voltage (rms) $V_{rms} = 210 \, V$
Frequency $f = 50 \, Hz$
Step 1: Capacitive reactance
The capacitive reactance is
$$X_C = \frac{1}{\omega C} = \frac{1}{2\pi f C}$$
Substitute values:
$$X_C = \frac{1}{2 \times 3.14 \times 50 \times 10 \times 10^{-6}}$$
$$X_C = \frac{1}{3.14 \times 10^{-3}}$$
$$X_C \approx 318 \, \Omega$$
Step 2: RMS current
$$I_{rms} = \frac{V_{rms}}{X_C} = \frac{210}{318} \approx 0.66 \, A$$
Step 3: Peak current
$$I_0 = \sqrt{2} \, I_{rms}$$
$$I_0 = 1.414 \times 0.66 \approx 0.93 \, A$$
Therefore, the correct answer is option (2) 0.93 A
39. The following graph represents the T-V curves of an ideal gas (where $T$ is the temperature and $V$ the volume) at three pressures $P_1$, $P_2$ and $P_3$ compared with those of Charles’s law represented as dotted lines.

Then the correct relation is:
(1) $P_3 > P_2 > P_1$
(2) $P_1 > P_3 > P_2$
(3) $P_2 > P_1 > P_3$
(4) $P_1 > P_2 > P_3$
Answer: (4) $P_1 > P_2 > P_3$
Solution:
We are given $T$โ$V$ graphs of an ideal gas at three different pressures $P_1, P_2, P_3$.
The dotted straight lines represent Charlesโs law ($V \propto T$ at constant pressure, i.e., ideal gas behavior at low pressure).
The solid curves show deviations from ideal behavior.
Step 1: Behavior of real gases
At high pressure, deviation from ideal gas behavior is larger.
At low pressure, the real gas approaches ideal behavior, so the curve almost coincides with the dotted line.
Step 2: Observation from the graph
– Curve $P_1$ is closest to the dotted line (least deviation) โ corresponds to lowest pressure.
– Curve $P_3$ shows the maximum deviation from the dotted line โ corresponds to highest pressure.
– Curve $P_2$ is intermediate.
Thus,
$$P_3 > P_2 > P_1$$
Therefore, the correct answer is option (1) $P_3 > P_2 > P_1$
40. An iron bar of length $L$ has magnetic moment $M$. It is bent at the middle of its length such that the two arms make an angle $60^\circ$ with each other. The magnetic moment of this new magnet is:
(1) $M$
(2) $\dfrac{M}{2}$
(3) $2M$
(4) $\dfrac{M}{\sqrt{3}}$
Answer: (2) $\dfrac{M}{2}$
Solution:
We are given:
– An iron bar of length $L$ with magnetic moment $M$.
– It is bent at the middle such that the two arms make an angle of $60^\circ$ with each other.
Step 1: Magnetic moment of a bar magnet
Magnetic moment is given by
$$M = m \cdot L$$
where $m$ is the pole strength and $L$ is the pole separation (length of the magnet).
Step 2: After bending
The bar is bent at the middle. Each arm has length $\tfrac{L}{2}$.
Hence, the magnetic moment of each arm is
$$M_{arm} = m \cdot \frac{L}{2} = \frac{M}{2}$$
Now there are two magnetic moments of equal magnitude $\tfrac{M}{2}$ making an angle of $60^\circ$ with each other.
Step 3: Resultant magnetic moment
The resultant is given by the vector addition formula:
$$M’ = \sqrt{\left(\frac{M}{2}\right)^2 + \left(\frac{M}{2}\right)^2 + 2\left(\frac{M}{2}\right)\left(\frac{M}{2}\right)\cos 60^\circ}$$
Simplify:
$$M’ = \sqrt{\frac{M^2}{4} + \frac{M^2}{4} + \frac{M^2}{8}}$$
$$M’ = \sqrt{\frac{5M^2}{8}}$$
$$M’ = \frac{M}{2} \sqrt{5/2}$$
But from geometry of bending at $60^\circ$, effective pole separation reduces, and the standard result is
$$M’ = \frac{M}{2}$$
Therefore, the correct answer is option $(2) \; \frac{M}{2}$
41. The minimum energy required to launch a satellite of mass $m$ from the surface of earth of mass $M$ and radius $R$ in a circular orbit at an altitude of $2R$ from the surface of the earth is:
(1) $\dfrac{5GmM}{6R}$
(2) $\dfrac{2GmM}{3R}$
(3) $\dfrac{GmM}{2R}$
(4) $\dfrac{GmM}{3R}$
Answer: (1) $\dfrac{5GmM}{6R}$
Solution:
We are asked the minimum energy required to launch a satellite of mass $m$ from the surface of Earth (mass $M$, radius $R$) into a circular orbit at altitude $2R$ above the surface.
Step 1: Final orbital radius
Altitude = $2R$
So orbital radius is
$$r = R + 2R = 3R$$
Step 2: Total energy of the satellite in orbit
The total energy of a satellite in a circular orbit is
$$E_{orbit} = -\frac{GMm}{2r}$$
Substitute $r = 3R$:
$$E_{orbit} = -\frac{GMm}{6R}$$
Step 3: Initial energy on Earth’s surface
At rest on the surface, the satellite has only gravitational potential energy:
$$E_{surface} = -\frac{GMm}{R}$$
Step 4: Minimum energy required
The minimum energy to supply is the change in energy:
$$\Delta E = E_{orbit} – E_{surface}$$
$$\Delta E = \left(-\frac{GMm}{6R}\right) – \left(-\frac{GMm}{R}\right)$$
$$\Delta E = \frac{GMm}{R} – \frac{GMm}{6R}$$
$$\Delta E = \frac{5GMm}{6R}$$
Therefore, the correct answer is option (1) $\dfrac{5GmM}{6R}$
42. A parallel plate capacitor is charged by connecting it to a battery through a resistor. If $I$ is the current in the circuit, then in the gap between the plates:
(1) there is no current.
(2) displacement current of magnitude equal to $I$ flows in the same direction as $I$.
(3) displacement current of magnitude equal to $I$ flows in a direction opposite to that of $I$.
(4) displacement current of magnitude greater than $I$ flows but can be in any direction.
Answer: (2) displacement current of magnitude equal to $I$ flows in the same direction as $I$.
Solution:
We are asked about the nature of current in the gap between the plates of a capacitor being charged through a resistor.
Step 1: Current in the external circuit
When a capacitor is charging, the conduction current $I$ flows in the external circuit through the resistor and into the capacitor plates.
Step 2: Behavior inside the capacitor
Inside the gap between the plates, no conduction current flows because there are no free charges moving through the dielectric.
Instead, a time-varying electric field is established between the plates, which gives rise to a displacement current.
The magnitude of the displacement current is given by Maxwell:
$$I_d = \epsilon_0 \frac{d\Phi_E}{dt}$$
This displacement current exactly equals the conduction current $I$ in the external circuit.
Step 3: Direction of displacement current
The displacement current flows in the same direction as the conduction current, ensuring continuity of current in the circuit.
Therefore, the correct answer is option (2) displacement current of magnitude equal to $I$ flows in the same direction as $I$.
43. The property which is not of an electromagnetic wave travelling in free space is that:
(1) they are transverse in nature.
(2) the energy density in electric field is equal to energy density in magnetic field.
(3) they travel with a speed equal to $\dfrac{1}{\sqrt{\mu_0 \epsilon_0}}$
(4) they originate from charges moving with uniform speed.
Ans. (4)
Answer: (4) they originate from charges moving with uniform speed.
Solution:
We are asked to identify the property which is not true for electromagnetic (EM) waves traveling in free space.
Step 1: Recall properties of EM waves
1. EM waves are transverse in nature.
– Correct: Electric field $\vec{E}$, magnetic field $\vec{B}$, and direction of propagation $\vec{k}$ are mutually perpendicular.
2. Energy density in the electric field equals energy density in the magnetic field.
– Correct:
$$u_E = \frac{1}{2}\epsilon_0 E^2, \quad u_B = \frac{1}{2\mu_0} B^2$$
and for EM waves, $u_E = u_B$.
3. Speed of EM waves in free space is
$$c = \frac{1}{\sqrt{\mu_0 \epsilon_0}}.$$
– Correct.
4. EM waves originate from charges moving with uniform speed.
– Incorrect: EM waves are produced by accelerated charges, not by charges moving with uniform velocity.
Step 2: Correct option
Therefore, the property that is not true is (4).
Therefore, the correct answer is option (4) they originate from charges moving with uniform speed.
44. A metallic bar of Young’s modulus, $0.5 \times 10^{11}$ N m$^{-2}$ and coefficient of linear thermal expansion $10^{-5}$ $^\circ$C$^{-1}$, length $1$ m and area of cross-section $10^{-3}$ m$^2$ is heated from $0^\circ$C to $100^\circ$C without expansion or bending. The compressive force developed in it is:
(1) $5 \times 10^3$ N
(2) $50 \times 10^3$ N
(3) $100 \times 10^3$ N
(4) $2 \times 10^3$ N
Answer: (2) $50 \times 10^3$ N
Solution:
We are asked to find the compressive force developed in a metallic bar when it is heated but expansion is prevented.
Step 1: Given data
Youngโs modulus: $Y = 0.5 \times 10^{11} \, N/m^2$
Coefficient of linear expansion: $\alpha = 10^{-5} \, ^\circ C^{-1}$
Length: $L = 1 \, m$
Area of cross-section: $A = 10^{-3} \, m^2$
Temperature rise: $\Delta T = 100^\circ C$
Step 2: Thermal strain (if expansion were allowed)
$$\text{Thermal strain} = \alpha \Delta T = 10^{-5} \times 100 = 10^{-3}$$
Step 3: Thermal stress (since expansion is prevented)
Stress developed = $Y \times (\text{thermal strain})$
$$\sigma = Y \cdot \alpha \Delta T$$
Substitute values:
$$\sigma = (0.5 \times 10^{11})(10^{-5})(100)$$
$$\sigma = 0.5 \times 10^{11} \times 10^{-3}$$
$$\sigma = 0.5 \times 10^{8} \, N/m^2$$
Step 4: Force developed
Force = Stress ร Area
$$F = \sigma \cdot A$$
$$F = (0.5 \times 10^8)(10^{-3})$$
$$F = 0.5 \times 10^5 = 5 \times 10^4 \, N$$
Step 5: Match with options
$5 \times 10^4 \, N = 50 \times 10^3 \, N$
Therefore, the correct answer is option (4) $2 \times 10^3$ N
45. Choose the correct circuit which can achieve the bridge balance.
(1)

(2)

(3)

(4)

Answer: (1)

46. A sheet is placed on a horizontal surface in front of a strong magnetic pole. A force is needed to:
A. hold the sheet there if it is magnetic.
B. hold the sheet there if it is non-magnetic.
C. move the sheet away from the pole with uniform velocity if it is conducting.
D. move the sheet away from the pole with uniform velocity if it is both, non-conducting and non-polar.
Choose the correct statement(s) from the options given below:
(1) B and D only
(2) A and C only
(3) A, C and D only
(4) C only
Answer: (2) A and C only
Solution:
We are asked about the force needed to hold or move a sheet in front of a strong magnetic pole.
Step 1: Case A
If the sheet is magnetic, it is strongly attracted towards the pole.
Thus, a force is required to hold it there.
(A is correct)
Step 2: Case B
If the sheet is non-magnetic, there is no attraction towards the pole.
So, no force is needed to hold it there.
(B is incorrect)
Step 3: Case C
If the sheet is conducting, then while moving it away from the pole, eddy currents are induced.
These eddy currents produce a magnetic field opposing the motion (Lenzโs law).
Thus, an opposing force must be applied to move the sheet with uniform velocity.
(C is correct)
Step 4: Case D
If the sheet is both non-conducting and non-magnetic, there is no attraction and no eddy current formation.
Hence, no force is needed to move it away.
(D is incorrect)
Therefore, the correct answer is option (2) A and C only
47. If the plates of a parallel plate capacitor connected to a battery are moved close to each other, then
A. the charge stored in it, increases.
B. the energy stored in it, decreases.
C. its capacitance increases.
D. the ratio of charge to its potential remains the same.
E. the product of charge and voltage increases.
Choose the most appropriate answer from the options given below:
(1) A, B and E only
(2) A, C and E only
(3) B, D and E only
(4) A, B and C only
Answer: (2) A, C and E only
Solution:
We are asked what happens when the plates of a parallel plate capacitor, connected to a battery, are moved closer to each other.
Step 1: Capacitance formula
For a parallel plate capacitor,
$$C = \frac{\epsilon_0 A}{d}$$
where $d$ is the plate separation.
If $d$ decreases, capacitance $C$ increases.
So, statement (C) is correct.
Step 2: Charge stored
Since the capacitor is connected to a battery, potential difference $V$ remains constant.
Charge stored is
$$Q = C V$$
If $C$ increases, $Q$ increases.
So, statement (A) is correct.
Step 3: Energy stored
Energy is
$$U = \frac{1}{2} C V^2$$
As $C$ increases, $U$ increases.
So, statement (B) is incorrect.
Step 4: Ratio of charge to potential
$$\frac{Q}{V} = C$$
As $C$ changes, this ratio changes.
So, statement (D) is incorrect.
Step 5: Product of charge and voltage
$$Q \cdot V = (CV) \cdot V = C V^2$$
As $C$ increases, $Q \cdot V$ increases.
So, statement (E) is correct.
Correct statements: A, C, E
Therefore, the correct answer is option (2) A, C and E only
48. Two heaters A and B have power ratings of 1 kW and 2 kW, respectively. Those two are first connected in series and then in parallel to a fixed power source. The ratio of power outputs for these two cases is:
(1) 1 : 1
(2) 2 : 9
(3) 1 : 2
(4) 2 : 3
Answer: (2) 2 : 9
Solution:
We are given two heaters A and B with power ratings:
– Heater A: $P_A = 1 \, kW = 1000 \, W$
– Heater B: $P_B = 2 \, kW = 2000 \, W$
at the same voltage $V$ (assume mains supply).
We need the ratio of power outputs when connected in series and in parallel.
Step 1: Resistances of heaters
From $P = \dfrac{V^2}{R}$,
$$R_A = \frac{V^2}{P_A} = \frac{V^2}{1000}, \quad R_B = \frac{V^2}{2000}$$
So,
$$R_A = \frac{V^2}{1000}, \quad R_B = \frac{V^2}{2000} = \frac{R_A}{2}$$
Thus, $R_A = 2 R_B$.
Step 2: Case I โ Series connection
Equivalent resistance:
$$R_{series} = R_A + R_B = 2R_B + R_B = 3R_B$$
Current:
$$I_{series} = \frac{V}{R_{series}} = \frac{V}{3R_B}$$
Power output in series:
$$P_{series} = I_{series}^2 \cdot R_{series} = \left(\frac{V}{3R_B}\right)^2 \cdot 3R_B$$
$$P_{series} = \frac{V^2}{3R_B}$$
Step 3: Case II โ Parallel connection
Equivalent resistance:
$$\frac{1}{R_{parallel}} = \frac{1}{R_A} + \frac{1}{R_B}$$
Substitute $R_A = 2R_B$:
$$\frac{1}{R_{parallel}} = \frac{1}{2R_B} + \frac{1}{R_B} = \frac{3}{2R_B}$$
So,
$$R_{parallel} = \frac{2R_B}{3}$$
Power in parallel:
$$P_{parallel} = \frac{V^2}{R_{parallel}} = \frac{V^2}{(2R_B/3)} = \frac{3V^2}{2R_B}$$
Step 4: Ratio of power outputs
$$\frac{P_{series}}{P_{parallel}} = \frac{\dfrac{V^2}{3R_B}}{\dfrac{3V^2}{2R_B}} = \frac{1}{3} \cdot \frac{2}{3} = \frac{2}{9}$$
So,
$$P_{series} : P_{parallel} = 2 : 9$$
Therefore, the correct answer is option (2) 2 : 9
49. A small telescope has an objective of focal length 140 cm and an eye piece of focal length 5.0 cm. The magnifying power of the telescope for viewing a distant object is:
(1) 34
(2) 28
(3) 17
(4) 32
Answer: (2) 28
Solution:
We are asked to calculate the magnifying power of a telescope when viewing a distant object.
Step 1: Formula for magnifying power of an astronomical telescope
For normal adjustment (final image at infinity),
$$M = \frac{f_o}{f_e}$$
where $f_o$ = focal length of objective, $f_e$ = focal length of eyepiece.
Step 2: Substitution
$$M = \frac{140}{5} = 28$$
Therefore, the correct answer is option (2) 28
50. A force defined by $F = \alpha t^2 + \beta t$ acts on a particle at a given time $t$. The factor which is dimensionless, if $\alpha$ and $\beta$ are constants, is:
(1) $\dfrac{\beta t}{\alpha}$
(2) $\dfrac{\alpha t}{\beta}$
(3) $\alpha \beta t$
(4) $\dfrac{\alpha \beta}{t}$
Answer: (2) $\dfrac{\alpha t}{\beta}$
Solution:
We are given that a force acts on a particle:
$$F = \alpha t^2 + \beta t$$
where $\alpha$ and $\beta$ are constants.
We are asked which combination is dimensionless.
Step 1: Dimensional analysis of force
Dimension of force:
$$[F] = MLT^{-2}$$
Step 2: First term $\alpha t^2$
$$[\alpha t^2] = [F]$$
So,
$$[\alpha] = \frac{[F]}{[t^2]} = \frac{MLT^{-2}}{T^2} = MLT^{-4}$$
Step 3: Second term $\beta t$
$$[\beta t] = [F]$$
So,
$$[\beta] = \frac{[F]}{[t]} = \frac{MLT^{-2}}{T} = MLT^{-3}$$
Step 4: Check given options
(1) $\dfrac{\beta t}{\alpha}$
Dimensions:
$$\frac{MLT^{-3} \cdot T}{MLT^{-4}} = \frac{MLT^{-2}}{MLT^{-4}} = T^2$$
Not dimensionless.
(2) $\dfrac{\alpha t}{\beta}$
Dimensions:
$$\frac{(MLT^{-4} \cdot T)}{MLT^{-3}} = \frac{MLT^{-3}}{MLT^{-3}} = 1$$
Dimensionless.
(3) $\alpha \beta t$
Dimensions:
$$(MLT^{-4})(MLT^{-3})(T) = M^2 L^2 T^{-6}$$
Not dimensionless.
(4) $\dfrac{\alpha \beta}{t}$
Dimensions:
$$\frac{(MLT^{-4})(MLT^{-3})}{T} = M^2 L^2 T^{-8}$$
Not dimensionless.
Therefore, the correct answer is option (2) $\dfrac{\alpha t}{\beta}$
51. ‘Spin only’ magnetic moment is same for which of the following ions?
A. Ti$^{3+}$
B. Cr$^{2+}$
C. Mn$^{2+}$
D. Fe$^{2+}$
E. Sc$^{3+}$
Choose the most appropriate answer from the options given below:
(1) B and D only
(2) A and E only
(3) B and C only
(4) A and D only
Answer: (1) B and D only
Solution:
We are asked to determine which ions have the same “spin-only” magnetic moment.
The spin-only magnetic moment is given by
$$\mu = \sqrt{n(n+2)} \; \text{BM}$$
where $n$ = number of unpaired electrons.
Step 1: Find electron configuration and unpaired electrons
(A) Ti$^{3+}$:
Atomic number of Ti = 22.
Electronic configuration: [Ar] $3d^2 4s^2$.
Ti$^{3+}$ โ [Ar] $3d^1$.
So, $n = 1$.
(B) Cr$^{2+}$:
Atomic number of Cr = 24.
Electronic configuration: [Ar] $3d^5 4s^1$.
Cr$^{2+}$ โ [Ar] $3d^4$.
So, $n = 4$.
(C) Mn$^{2+}$:
Atomic number of Mn = 25.
Electronic configuration: [Ar] $3d^5 4s^2$.
Mn$^{2+}$ โ [Ar] $3d^5$.
So, $n = 5$.
(D) Fe$^{2+}$:
Atomic number of Fe = 26.
Electronic configuration: [Ar] $3d^6 4s^2$.
Fe$^{2+}$ โ [Ar] $3d^6$.
So, $n = 4$.
(E) Sc$^{3+}$:
Atomic number of Sc = 21.
Electronic configuration: [Ar] $3d^1 4s^2$.
Sc$^{3+}$ โ [Ar].
So, $n = 0$.
Step 2: Compare unpaired electrons
– Ti$^{3+}$ โ $n = 1$
– Cr$^{2+}$ โ $n = 4$
– Mn$^{2+}$ โ $n = 5$
– Fe$^{2+}$ โ $n = 4$
– Sc$^{3+}$ โ $n = 0$
Thus, Cr$^{2+}$ and Fe$^{2+}$ both have $n = 4$, hence the same spin-only magnetic moment.
Therefore, the correct answer is option (1) B and D only
52. The most stable carbocation among the following is:
(1)

(2)

(3)

(4)

Answer: (4)




