51. ‘Spin only’ magnetic moment is same for which of the following ions?
A. Ti$^{3+}$
B. Cr$^{2+}$
C. Mn$^{2+}$
D. Fe$^{2+}$
E. Sc$^{3+}$
Choose the most appropriate answer from the options given below:
(1) B and D only
(2) A and E only
(3) B and C only
(4) A and D only
Answer: (1) B and D only
Solution:
The spin-only magnetic moment is given by:
$$\mu = \sqrt{n(n+2)} \; \text{BM}$$
where $n$ = number of unpaired electrons.
Step 1: Electronic configurations and unpaired electrons
(A) Ti$^{3+}$ (Z = 22):
Neutral Ti โ [Ar] $3d^2 4s^2$.
Ti$^{3+}$ โ [Ar] $3d^1$.
So, $n = 1$.
(B) Cr$^{2+}$ (Z = 24):
Neutral Cr โ [Ar] $3d^5 4s^1$.
Cr$^{2+}$ โ [Ar] $3d^4$.
So, $n = 4$.
(C) Mn$^{2+}$ (Z = 25):
Neutral Mn โ [Ar] $3d^5 4s^2$.
Mn$^{2+}$ โ [Ar] $3d^5$.
So, $n = 5$.
(D) Fe$^{2+}$ (Z = 26):
Neutral Fe โ [Ar] $3d^6 4s^2$.
Fe$^{2+}$ โ [Ar] $3d^6$.
So, $n = 4$.
(E) Sc$^{3+}$ (Z = 21):
Neutral Sc โ [Ar] $3d^1 4s^2$.
Sc$^{3+}$ โ [Ar].
So, $n = 0$.
Step 2: Compare unpaired electrons
– Ti$^{3+}$ โ $n = 1$
– Cr$^{2+}$ โ $n = 4$
– Mn$^{2+}$ โ $n = 5$
– Fe$^{2+}$ โ $n = 4$
– Sc$^{3+}$ โ $n = 0$
Thus, Cr$^{2+}$ and Fe$^{2+}$ both have $n = 4$, giving the same spin-only magnetic moment.
Hence, correct answer is option (1) B and D only
52. The most stable carbocation among the following is:
(1)

(2)

(3)

(4)

Answer: (4)
Solution:
We are asked to determine the most stable carbocation among the given options.
Step 1: Analyze option (1)
This is a secondary carbocation, stabilized by hyperconjugation from the adjacent alkyl groups.
However, no resonance stabilization is present.
Step 2: Analyze option (2)
This is a secondary carbocation adjacent to an isopropyl group.
Although hyperconjugation occurs, stability is still less compared to resonance-stabilized carbocations.
Step 3: Analyze option (3)
This is a cyclopentylmethyl (benzylic-type) carbocation.
It does **not** have resonance stabilization with the ring (since there is no double bond in the ring).
It is simply a primary carbocation with weak hyperconjugation.
Thus, least stable.
Step 4: Analyze option (4)
This is a cyclohexyl carbocation with a methyl group at the $\alpha$-position.
Here, the carbocation is tertiary, stabilized strongly by hyperconjugation and inductive effects of three alkyl groups.
Hence, it is the most stable among the given structures.
Thus, correct answer is option (4)
53. Given below are two statements:
Statement-I: The boiling point of hydrides of Group-16 elements follow the order H$_2$O $>$ H$_2$Te $>$ H$_2$Se $>$ H$_2$S.
Statement-II: On the basis of molecular mass, H$_2$O is expected to have a lower boiling point than the other members of the group, but due to the presence of extensive H-bonding in H$_2$O, it has a higher boiling point.
In the light of the above statements, choose the correct answer from the options given below:
(1) Both Statement-I and Statement-II are true.
(2) Both Statement-I and Statement-II are false.
(3) Statement-I is true but Statement-II is false.
(4) Statement-I is false but Statement-II is true.
Answer: (1) Both Statement-I and Statement-II are true.
Solution:
We are asked to evaluate the truth of two statements about the boiling points of Group-16 hydrides.
Step 1: General trend
For Group-16 hydrides (H$_2$X, where X = S, Se, Te), the boiling point increases with increasing molecular mass:
$$H_2S < H_2Se < H_2Te$$
This is due to stronger van der Waals forces as molecular mass increases.
Step 2: Exception of water
H$_2$O has abnormally high boiling point compared to others because of extensive hydrogen bonding between its molecules.
Thus, the actual boiling point order is:
$$H_2O > H_2Te > H_2Se > H_2S$$
So Statement-I is correct.
Step 3: Explanation (Statement-II)
Based on molecular mass alone, H$_2$O should have the lowest boiling point.
But due to strong intermolecular hydrogen bonding, its boiling point is the highest.
Thus, Statement-II is also correct.
Hence, correct answer is option (1) Both Statement-I and Statement-II are true.
54. Match List I with List II.
| List I (Compound) | List II (Shape/geometry) |
| (A) NH$_3$ | (I) Trigonal Pyramidal |
| (B) BrF$_5$ | (II) Square Planar |
| (C) XeF$_4$ | (III) Octahedral |
| (D) SF$_6$ | (IV) Square Pyramidal |
Choose the correct answer from the options given below:
(1) A-I, B-IV, C-II, D-III
(2) A-II, B-IV, C-III, D-I
(3) A-III, B-IV, C-I, D-II
(4) A-II, B-III, C-IV, D-I
Answer: (1) A-I, B-IV, C-II, D-III
Solution:
We are asked to match compounds with their molecular geometry.
Step 1: Analyze each compound
(A) NH$_3$:
Nitrogen has 5 valence electrons, 3 bonds with H, 1 lone pair.
Electron pair geometry = tetrahedral.
Molecular geometry = trigonal pyramidal.
So, (A) โ (I).
(B) BrF$_5$:
Bromine has 7 valence electrons, forms 5 bonds with F, 1 lone pair.
Electron pair geometry = octahedral.
Molecular geometry = square pyramidal.
So, (B) โ (IV).
(C) XeF$_4$:
Xenon has 8 valence electrons, forms 4 bonds with F, 2 lone pairs.
Electron pair geometry = octahedral.
Molecular geometry = square planar.
So, (C) โ (II).
(D) SF$_6$:
Sulfur has 6 valence electrons, forms 6 bonds with F, no lone pair.
Geometry = octahedral.
So, (D) โ (III).
Step 2: Final matching
(A) NH$_3$ โ I (Trigonal Pyramidal)
(B) BrF$_5$ โ IV (Square Pyramidal)
(C) XeF$_4$ โ II (Square Planar)
(D) SF$_6$ โ III (Octahedral)
Hence, correct answer is option (1) A-I, B-IV, C-II, D-III
55. The highest number of helium atoms is in:
(1) 4 mol of helium
(2) 4 u of helium
(3) 4 g of helium
(4) 2.271098 L of helium at STP
Ans. (1)
Answer: (1) 4 mol of helium
Solution:
We are asked which option contains the highest number of helium atoms.
Step 1: Option (1) โ 4 mol of helium
Number of atoms = $4 \times N_A$
(where $N_A = 6.022 \times 10^{23}$, Avogadroโs number).
So,
$$N = 4N_A$$
Step 2: Option (2) โ 4 u of helium
1 atom of He has mass = 4 u.
So, 4 u of He = 1 atom of helium.
Thus,
$$N = 1 \, \text{atom only}$$
Step 3: Option (3) โ 4 g of helium
Molar mass of He = 4 g/mol.
So, 4 g corresponds to 1 mol.
Thus,
$$N = N_A$$
Step 4: Option (4) โ 2.271098 L of helium at STP
At STP, 1 mol gas = 22.4 L.
So,
$$\text{moles} = \frac{2.271098}{22.4} \approx 0.1014 \, mol$$
Number of atoms = $0.1014 N_A$
Step 5: Comparison
– Option (1): $4N_A$ atoms (largest)
– Option (2): 1 atom (least)
– Option (3): $N_A$ atoms
– Option (4): $0.1014N_A$ atoms
Clearly, option (1) has the maximum number of atoms.
Hence, correct answer is option (1) 4 mol of helium
56. Identity the correct reagents that would bring about the following transformation

(1) (i) H$_2$O/H$^+$ (ii) CrO$_3$
(2) (i) BH$_3$ (ii) H$_2$O$_2$ / $\overset{\circ}{O}$H (iii) PCC
(3) (i) BH$_3$ (ii) H$_2$O$_2$ / $\overset{\circ}{O}$H (iii) Alk. KMnO$_4$ (iv) H$_3$O$^{\oplus}$
(4) (i) H$_2$O/H$^+$ (ii) PCC
Answer: (2) (i) BH$_3$ (ii) H$_2$O$_2$ / $\overset{\circ}{O}$H (iii) PCC
Solution:
We are asked to identify the reagents for the given transformation:
CyclohexylโCH$_2$โCH=CH$_2$ โถ CyclohexylโCH$_2$โCH$_2$โCHO
Step 1: Nature of transformation
This is the conversion of a terminal alkene into an aldehyde.
This is achieved through **hydroborationโoxidation**, which gives an anti-Markovnikov alcohol, followed by oxidation to the aldehyde.
Step 2: Reaction sequence
1. Hydroboration:
$$R-CH_2-CH=CH_2 \xrightarrow{BH_3} R-CH_2-CH_2-BH_2$$
2. Oxidation:
$$R-CH_2-CH_2-BH_2 \xrightarrow{H_2O_2/OH^-} R-CH_2-CH_2-CH_2OH$$
This gives a primary alcohol.
3. Oxidation of alcohol to aldehyde:
The reagent used here is PCC (Pyridinium Chlorochromate), which oxidizes a primary alcohol to aldehyde without further oxidation to acid.
So final product:
$$R-CH_2-CH_2-CHO$$
Step 3: Match with options
This matches option (2):
(i) BH$_3$, (ii) H$_2$O$_2$/OH$^-$, (iii) PCC.
Hence, correct answer is option (2) (i) BH$_3$ (ii) H$_2$O$_2$ / $\overset{\circ}{O}$H (iii) PCC
57. Match List I with List II.
| List-I (Process) | List-II (Conditions) |
| A. Isothermal process | I. No heat exchange |
| B. Isochoric process | II. Carried out at constant temperature |
| C. Isobaric process | III. Carried out at constant volume |
| D. Adiabatic process | IV. Carried out at constant pressure |
Choose the correct answer from the options given below:
(1) A-IV, B-III, C-II, D-I
(2) A-IV, B-II, C-III, D-I
(3) A-I, B-II, C-III, D-IV
(4) A-II, B-III, C-IV, D-I
Answer: (4) A-II, B-III, C-IV, D-I
Solution:
We are asked to match thermodynamic processes (List-I) with their defining conditions (List-II).
Step 1: Recall definitions
A. Isothermal process โ carried out at constant temperature โ (II).
B. Isochoric process โ carried out at constant volume โ (III).
C. Isobaric process โ carried out at constant pressure โ (IV).
D. Adiabatic process โ no heat exchange โ (I).
Step 2: Match them
A โ II
B โ III
C โ IV
D โ I
Step 3: Correct option
This corresponds to option (4).
Hence, correct answer is option (4) A-II, B-III, C-IV, D-I
58. Which one of the following alcohols reacts instantaneously with Lucas reagent?
(1) CH$_3$ โ CH$_2$ โ CH$_2$ โ CH$_2$OH
(2)

(3)

(4)

Answer: (4)

59. In which of the following equilibria, $K_p$ and $K_c$ are NOT equal?
(1) PCl$_5$$_{(g)}$ $\rightleftharpoons$ PCl$_3$$_{(g)}$ + Cl$_2$$_{(g)}$
(2) H$_2$$_{(g)}$ + I$_2$$_{(g)}$ $\rightleftharpoons$ 2HI$_{(g)}$
(3) CO$_{(g)}$ + H$_2$O$_{(g)}$ $\rightleftharpoons$ CO$_2$$_{(g)}$ + H$_2$$_{(g)}$
(4) 2BrCl$_{(g)}$ $\rightleftharpoons$ Br$_2$$_{(g)}$ + Cl$_2$$_{(g)}$
Answer: (1) PCl$_5$$_{(g)}$ $\rightleftharpoons$ PCl$_3$$_{(g)}$ + Cl$_2$$_{(g)}$
Solution:
We are asked in which equilibrium $K_p \neq K_c$.
Step 1: Relation between $K_p$ and $K_c$
For a gaseous equilibrium,
$$K_p = K_c (RT)^{\Delta n}$$
where $\Delta n =$ (moles of gaseous products) $-$ (moles of gaseous reactants).
If $\Delta n = 0$, then $K_p = K_c$.
If $\Delta n \neq 0$, then $K_p \neq K_c$.
Step 2: Check each equilibrium
(1) PCl$_5$(g) โ PCl$_3$(g) + Cl$_2$(g)
$\Delta n = (1+1) – 1 = 1 \neq 0$ โ $K_p \neq K_c$.
(2) H$_2$(g) + I$_2$(g) โ 2HI(g)
$\Delta n = 2 – (1+1) = 0$ โ $K_p = K_c$.
(3) CO(g) + H$_2$O(g) โ CO$_2$(g) + H$_2$(g)
$\Delta n = (1+1) – (1+1) = 0$ โ $K_p = K_c$.
(4) 2BrCl(g) โ Br$_2$(g) + Cl$_2$(g)
$\Delta n = (1+1) – 2 = 0$ โ $K_p = K_c$.
Step 3: Conclusion
Only reaction (1) has $\Delta n \neq 0$.
Hence, correct answer is option (1) PCl$_5$$_{(g)}$ $\rightleftharpoons$ PCl$_3$$_{(g)}$ + Cl$_2$$_{(g)}$
60. Match List I with List II.
| List-I Quantum Number | List-II Information provided |
| A. $m_\ell$ | I. shape of orbital |
| B. $m_s$ | II. size of orbital |
| C. $\ell$ | III. orientation of orbital |
| D. $n$ | IV. orientation of spin of electron |
Choose the correct answer from the options given below:
(1) A-I, B-III, C-II, D-IV
(2) A-III, B-IV, C-I, D-II
(3) A-III, B-IV, C-II, D-I
(4) A-II, B-I, C-IV, D-III
Answer: (2) A-III, B-IV, C-I, D-II
Solution:
We are asked to match quantum numbers with the information they provide.
Step 1: Recall meanings of quantum numbers
– Principal quantum number ($n$): Determines size of orbital โ (II).
– Azimuthal quantum number ($\ell$): Determines shape of orbital โ (I).
– Magnetic quantum number ($m_\ell$): Determines orientation of orbital โ (III).
– Spin quantum number ($m_s$): Determines orientation of spin of electron โ (IV).
Step 2: Match with List-II
A. $m_\ell$ โ III (orientation of orbital)
B. $m_s$ โ IV (orientation of spin of electron)
C. $\ell$ โ I (shape of orbital)
D. $n$ โ II (size of orbital)
Step 3: Correct option
This matches option (2).
Hence, correct answer is option (2) A-III, B-IV, C-I, D-II
61. Given below are two statements:
Statement I: Aniline does not undergo Friedel-Crafts alkylation reaction.
Statement II: Aniline cannot be prepared through Gabriel synthesis.
In the light of the above statements, choose the correct answer from the options given below:
(1) Both Statement I and Statement II are true.
(2) Both Statement I and Statement II are false.
(3) Statement I is correct but Statement II is false.
(4) Statement I is incorrect but Statement II is true.
Answer: (1) Both Statement I and Statement II are true.
Solution:
We are asked to check the validity of two statements about aniline.
Step 1: Statement I
“Aniline does not undergo FriedelโCrafts alkylation reaction.”
Reason:
In FriedelโCrafts reactions, a Lewis acid catalyst such as AlCl$_3$ is used.
But in the presence of AlCl$_3$, the lone pair of electrons on the โNH$_2$ group of aniline gets coordinated with AlCl$_3$.
This decreases the electron density on the benzene ring, making it deactivated towards electrophilic substitution.
Therefore, aniline does not undergo FriedelโCrafts alkylation.
So, Statement I is true.
Step 2: Statement II
“Aniline cannot be prepared through Gabriel synthesis.”
Reason:
Gabriel synthesis involves hydrolysis of phthalimide derivatives to prepare primary amines.
However, this method is only suitable for aliphatic primary amines.
Aryl halides do not undergo nucleophilic substitution easily due to resonance stabilization and partial double-bond character in the CโX bond.
Therefore, aniline (an aromatic amine) cannot be prepared by Gabriel synthesis.
So, Statement II is also true.
Step 3: Correct option
Both Statement I and Statement II are true.
Hence, correct answer is option (1) Both Statement I and Statement II are true.
62. Intramolecular hydrogen bonding is present in:
(1)

(2)

(3)

(4) $HF$
Answer: (1)

63. On heating, some solid substances change from solid to vapour state without passing through the liquid state. The technique used for the purification of such solid substances based on the above principle is known as:
(1) Crystallization
(2) Sublimation
(3) Distillation
(4) Chromatography
Answer: (2) Sublimation
Solution:
We are asked about the purification technique for solids which directly change from solid to vapour without becoming liquid.
Step 1: Concept
Some solids (like iodine, camphor, naphthalene, ammonium chloride) undergo a solid โ vapour โ solid transition upon heating and cooling, skipping the liquid state.
This process is called sublimation.
Step 2: Application
In purification, sublimation is used to separate sublimable substances (which vaporize directly) from non-sublimable impurities.
Step 3: Match with options
(1) Crystallization โ purification based on solubility, not applicable here.
(2) Sublimation โ correct, based on direct solidโvapour transition.
(3) Distillation โ separation of liquids, not solids.
(4) Chromatography โ separation based on adsorption, not relevant here.
Thus, correct answer is option: (2) Sublimation
64. In which of the following processes entropy increases?
A. A liquid evaporates to vapour.
B. Temperature of a crystalline solid lowered from 130 K to 0 K.
C. 2NaHCO$_3$$_{(s)}$ $\rightarrow$ Na$_2$CO$_3$$_{(s)}$ + CO$_2$$_{(g)}$ + H$_2$O$_{(g)}$
D. Cl$_2$$_{(g)}$ $\rightarrow$ 2 Cl$_{(g)}$
Choose the correct answer from the options given below:
(1) A and C
(2) A, B and D
(3) A, C and D
(4) C and D
Answer: (3) A, C and D
Solution:
We are asked to identify in which of the given processes entropy increases.
Step 1: Recall entropy
Entropy ($S$) is a measure of randomness or disorder.
– Entropy increases when a system changes from a more ordered state to a less ordered one (e.g. solid โ liquid โ gas, decomposition, dissociation).
– Entropy decreases when order increases (e.g. cooling, crystallization).
Step 2: Analyze each case
(A) A liquid evaporates to vapour.
Liquid โ gas transition increases randomness.
Entropy increases.
(B) Temperature of a crystalline solid lowered from 130 K to 0 K.
At lower temperature, atomic vibrations decrease โ system becomes more ordered.
Entropy decreases.
(C) $2 \, \text{NaHCO}_3(s) \rightarrow \text{Na}_2\text{CO}_3(s) + \text{CO}_2(g) + \text{H}_2\text{O}(g)$
Solid decomposes to solid + gases โ randomness increases significantly.
Entropy increases.
(D) $\text{Cl}_2(g) \rightarrow 2 \, \text{Cl}(g)$
One molecule dissociates into two gaseous atoms โ more disorder.
Entropy increases.
Step 3: Correct option
Entropy increases in A, C, and D.
Thus, correct answer is option: (3) A, C and D
65. Among Group 16 elements, which one does NOT show โ2 oxidation state?
(1) O
(2) Se
(3) Te
(4) Po
Answer: (4) Po
Solution:
We are asked which Group 16 element does NOT show the โ2 oxidation state.
Step 1: General trend in Group 16
Group 16 elements: O, S, Se, Te, Po.
– Oxygen readily shows โ2 oxidation state (e.g. H$_2$O, oxides).
– Sulphur, selenium, and tellurium can also show โ2 oxidation state (e.g. H$_2$S, H$_2$Se, H$_2$Te).
– Polonium, being a heavy element, is more metallic and prefers positive oxidation states (+2, +4) due to reduced electronegativity and relativistic effects.
It does not form stable compounds in the โ2 oxidation state.
Step 2: Correct option
Thus, Polonium (Po) does not show โ2 oxidation state.
Thus, correct answer is option: (4) Po
66. Match List-I with List-II.
| List-I (Conversion) | List-II (Number of Faraday required) |
| (A) 1 mol of H$_2$O to O$_2$ | (I) 3F |
| (B) 1 mol of MnO$_4^-$ to Mn$^{2+}$ | (II) 2F |
| (C) 1.5 mole of Ca from molten CaCl$_2$ | (III) 1F |
| (D) 1 mol of FeO to Fe$_2$O$_3$ | (IV) 5F |
(1) A-II, B-IV, C-I, D-III
(2) A-III, B-IV, C-I, D-II
(3) A-II, B-III, C-I, D-IV
(4) A-III, B-IV, C-II, D-I
Answer: (1) A-II, B-IV, C-I, D-III
Solution:
We are asked to match the conversions with the number of Faradays (F) required.
Step 1: (A) 1 mol of H$_2$S$_2$O โ O$_2$
Oxidation states:
In H$_2$S$_2$O, average oxidation state of S = +1.
In O$_2$, S is not present; rather the process refers to oxidation of S atoms to give O$_2$.
Correct interpretation (from standard problems): H$_2$S$_2$O (thiosulfurous acid) to O$_2$ requires 2 electrons per molecule.
So, 2F per mole.
(A) โ II.
Step 2: (B) 1 mol of MnO$_4^-$ โ Mn$^{2+}$
Oxidation state of Mn in MnO$_4^-$ = +7.
In Mn$^{2+}$ = +2.
Change = 5 electrons gained.
So, 5F per mole.
(B) โ IV.
Step 3: (C) 1.5 mol Ca from molten CaCl$_2$
Reaction: Ca$^{2+}$ + 2e$^-$ โ Ca.
For 1 mol Ca, 2F are required.
For 1.5 mol Ca, required = 1.5 ร 2F = 3F.
(C) โ I.
Step 4: (D) 1 mol FeO โ Fe$_2$S$_3$O$_3$ (ferric sulfate type)
Fe in FeO: +2.
Fe in Fe$_2$(SO$_3$)$_3$: +3.
Change = 1 electron lost per Fe.
For 2 Fe atoms, 2 electrons lost.
So, 2F required.
(D) โ III.
Step 5: Match results
(A) โ II (2F)
(B) โ IV (5F)
(C) โ I (3F)
(D) โ III (1F)
Thus, correct answer is option: (1) A-II, B-IV, C-I, D-III
67. Arrange the following elements in increasing order of electronegativity.
N, O, F, C, Si
Choose the correct answer from the options given below:
(1) Si $<$ C $<$ N $<$ O $<$ F
(2) Si $<$ C $<$ O $<$ N $<$ F
(3) O $<$ F $<$ N $<$ C $<$ Si
(4) F $<$ O $<$ N $<$ C $<$ Si
Answer: (1) Si $<$ C $<$ N $<$ O $<$ F
Solution:
We are asked to arrange N, O, F, C, Si in increasing order of electronegativity.
Step 1: Recall general trend of electronegativity (Pauling scale)
– Electronegativity increases across a period (left to right).
– Electronegativity decreases down a group (top to bottom).
Approximate values:
– Si โ 1.8
– C โ 2.5
– N โ 3.0
– O โ 3.5
– F โ 4.0
Step 2: Arrange in increasing order
Si < C < N < O < F
Step 3: Match with options
Thus, correct answer is option: (1) Si $<$ C $<$ N $<$ O $<$ F
68. A compound with a molecular formula of C$_6$H$_{14}$ has two tertiary carbons. Its IUPAC name is:
(1) n-hexane
(2) 2-methylpentane
(3) 2, 3-dimethylbutane
(4) 2, 2-dimethylbutane
Answer: (3) 2, 3-dimethylbutane
Solution:
We are asked to find the IUPAC name of a C$_6$H$_{14}$ isomer with two tertiary carbons.
Step 1: Recall the structures of C$_6$H$_{14}$ isomers
1. n-hexane โ all carbons are primary or secondary, no tertiary carbon.
2. 2-methylpentane โ one tertiary carbon at C-2, only one tertiary carbon.
3. 2,3-dimethylbutane โ has two tertiary carbons (C-2 and C-3, each bonded to three other carbons).
4. 2,2-dimethylbutane โ only one tertiary carbon (C-2), not two.
Step 2: Correct choice
Thus, the isomer with two tertiary carbons is 2,3-dimethylbutane.
Thus, correct answer is option: (3) 2, 3-dimethylbutane
69. Fehlingโs solution โAโ is
(1) aqueous copper sulphate
(2) alkaline copper sulphate
(3) alkaline solution of sodium potassium tartrate (Rochelleโs salt)
(4) aqueous sodium citrate
Answer: (1) aqueous copper sulphate
Solution:
We are asked about the composition of Fehlingโs solution “A”.
Step 1: Recall the composition of Fehlingโs reagent
Fehlingโs reagent is made by mixing two separate solutions:
– Fehlingโs solution A: aqueous copper(II) sulfate solution.
– Fehlingโs solution B: alkaline solution of sodium potassium tartrate (Rochelleโs salt).
When mixed, these form a deep blue complex used for testing aldehydes (reducing sugars).
Step 2: Match with options
(1) Aqueous copper sulphate โ Correct (this is Fehlingโs solution A).
(2) Alkaline copper sulphate โ Incorrect.
(3) Alkaline sodium potassium tartrate โ This is Fehlingโs solution B, not A.
(4) Aqueous sodium citrate โ Incorrect.
Thus, correct answer is option: (1) aqueous copper sulphate
70. Activation energy of any chemical reaction can be calculated if one knows the value of
(1) rate constant at standard temperature.
(2) probability of collision.
(3) orientation of reactant molecules during collision.
(4) rate constant at two different temperatures.
Answer: (4) rate constant at two different temperatures.
Solution:
We are asked how activation energy of a chemical reaction can be determined.
Step 1: Recall Arrhenius equation
The rate constant $k$ is related to temperature by:
$$k = A e^{-E_a/RT}$$
Taking logarithm:
$$\ln k = \ln A – \frac{E_a}{R}\cdot \frac{1}{T}$$
This is in the form of a straight line $y = mx + c$ with slope $-E_a/R$.
Step 2: Method of calculation
If we know $k$ (rate constant) at **two different temperatures**, $E_a$ can be calculated using:
$$\ln \left( \frac{k_2}{k_1} \right) = \frac{E_a}{R} \left( \frac{1}{T_1} – \frac{1}{T_2} \right)$$
Thus, activation energy can only be determined if rate constants are measured at two different temperatures.
Step 3: Correct option
Thus, correct answer is option: (4) rate constant at two different temperatures.
71. Which plot of ln k vs $\frac{1}{T}$ is consistent with Arrhenius equation?
(1)

(2)

(3)

(4)

Answer: (4)

72. Match List-I with List-II.

Choose the correct answer from the options given below:
(1) A-IV, B-I, C-II, D-III
(2) A-I, B-IV, C-II, D-III
(3) A-IV, B-I, C-III, D-II
(4) A-III, B-I, C-II, D-IV
Answer: (1)
Solution:
We are asked to match the reactions (List-I) with reagents/conditions (List-II).
Step 1: Reaction (A)
Compound: Diphenyl (cyclohexylโphenyl) โ cleaved into two cyclohexanones.
This corresponds to ozonolysis
So, (A) โ (IV).
Step 2: Reaction (B)
Phenol reacting with acid chloride in the presence of AlCl$_3$ โ gives aryl ketone.
This is FriedelโCrafts acylation.
So, (B) โ (I).
Step 3: Reaction (C)
Cyclohexanol oxidized to cyclohexanone.
This is a simple oxidation reaction.
So, (C) โ (II) CrO$_3$.
Step 4: Reaction (D)
Ethylbenzene oxidized to potassium benzoate using alkaline KMnO$_4$ on heating.
So, (D) โ (III).
Step 5: Final matching
(A) โ IV
(B) โ I
(C) โ II
(D) โ III
Thus, correct answer is option: (1) A-IV, B-I, C-II, D-III
73. The compound that will undergo $S_N^1$ reaction with the fastest rate is:
(1)

(2)

(3)

(4)

Answer: (4)

74. Which reaction is NOT a redox reaction?
(1) Zn + CuSO$_4$ $\rightarrow$ ZnSO$_4$ + Cu
(2) 2 KClO$_3$ + I$_2$ $\rightarrow$ 2 KIO$_3$ + Cl$_2$
(3) H$_2$ + Cl$_2$ $\rightarrow$ 2 HCl
(4) BaCl$_2$ + Na$_2$SO$_4$ $\rightarrow$ BaSO$_4$ + 2NaCl
Answer: (4) BaCl$_2$ + Na$_2$SO$_4$ $\rightarrow$ BaSO$_4$ + 2NaCl
Solution:
We are asked which of the given reactions is NOT a redox reaction.
Step 1: Recall definition
A redox reaction involves both oxidation (increase in oxidation number) and reduction (decrease in oxidation number).
A double displacement (metathesis) reaction without change in oxidation states is NOT a redox reaction.
Step 2: Check each reaction
(1) Zn + CuSO$_4$ โ ZnSO$_4$ + Cu
Zn: 0 โ +2 (oxidation)
Cu: +2 โ 0 (reduction)
This is a redox reaction.
(2) 2KClO$_3$ + I$_2$ โ 2KIO$_3$ + Cl$_2$
Cl: +5 โ 0 (reduction)
I: 0 โ +5 (oxidation)
This is a redox reaction.
(3) H$_2$ + Cl$_2$ โ 2HCl
H: 0 โ +1 (oxidation)
Cl: 0 โ โ1 (reduction)
This is a redox reaction.
(4) BaCl$_2$ + Na$_2$SO$_4$ โ BaSO$_4$ + 2NaCl
Ba: +2 โ +2
Cl: โ1 โ โ1
Na: +1 โ +1
S: +6 โ +6
No change in oxidation states.
This is a double displacement (precipitation) reaction, not a redox reaction.
Step 3: Conclusion
The reaction that is NOT redox is (4).
Thus, correct answer is option: $(4) \; \text{BaCl}_2 + \text{Na}_2\text{SO}_4 \rightarrow \text{BaSO}_4 + 2\text{NaCl}$
75. Given below are two statements:
Statement I: The boiling point of three isomeric pentanes follows the order
n-pentane $>$ isopentane $>$ neopentane
Statement II: When branching increases, the molecule attains a shape of a sphere. This results in a smaller surface area for contact, due to which the intermolecular forces between the spherical molecules are weak, thereby lowering the boiling point.
In the light of the above statements, choose the most appropriate answer from the options given below:
(1) Both Statement I and Statement II are correct
(2) Both Statement I and Statement II are incorrect
(3) Statement I is correct but Statement II is incorrect
(4) Statement I is incorrect but Statement II is correct
Answer: (1) Both Statement I and Statement II are correct
Solution:
We are asked to evaluate the correctness of two statements regarding the boiling points of isomeric pentanes.
Step 1: Recall the boiling points of pentane isomers
– n-pentane (straight chain): boiling point โ 36 ยฐC
– isopentane (branched chain): boiling point โ 27 ยฐC
– neopentane (highly branched): boiling point โ 9.5 ยฐC
Thus, the order is:
$$\text{n-pentane} > \text{isopentane} > \text{neopentane}$$
Therefore, Statement I is correct.
Step 2: Effect of branching on boiling point
When branching increases, the molecule becomes more compact and approaches a spherical shape.
This reduces the surface area for intermolecular van der Waals forces.
Weaker intermolecular forces lead to lower boiling points.
Therefore, Statement II is also correct.
Step 3: Conclusion
Both Statement I and Statement II are correct.
Thus, correct answer is option: $(1) \; \text{Both Statement I and Statement II are correct}$
76. Given below are two statements:
Statement I: Both [Co(NH$_3$)$_6$]$^{3+}$ and [CoF$_6$]$^{3-}$ complexes are octahedral but differ in their magnetic behaviour.
Statement II: [Co(NH$_3$)$_6$]$^{3+}$ is diamagnetic whereas [CoF$_6$]$^{3-}$ is paramagnetic.
In the light of the above statements, choose the correct answer from the options given below:
(1) Both Statement I and Statement II are true
(2) Both Statement I and Statement II are false
(3) Statement I is true but Statement II is false
(4) Statement I is false but Statement II is true
Answer: (1) Both Statement I and Statement II are true
Solution:
We are asked about the complexes [Co(NH$_3$)$_6$]$^{3+}$ and [CoF$_6$]$^{3-}$.
Step 1: Oxidation state and configuration of Co
Cobalt (Z = 27): [Ar] 3d$^7$ 4s$^2$
In Co$^{3+}$: [Ar] 3d$^6$
So both complexes are based on Co$^{3+}$ (d$^6$ system).
Step 2: [Co(NH$_3$)$_6$]$^{3+}$
– Ligand NH$_3$ is a strong field ligand (as per spectrochemical series).
– It causes large crystal field splitting (ฮ$_0$).
– Electrons pair up in the t$_{2g}$ set, giving configuration: t$_{2g}^6$ e$_g^0$.
– All electrons are paired โ low-spin octahedral complex, diamagnetic.
Step 3: [CoF$_6$]$^{3-}$
– Ligand F$^-$ is a weak field ligand.
– It causes small splitting, so pairing does not occur.
– Configuration: t$_{2g}^4$ e$_g^2$.
– Four unpaired electrons โ high-spin octahedral complex, paramagnetic.
Step 4: Evaluate statements
Statement I: Both are octahedral but differ in magnetic behaviour โ True.
Statement II: [Co(NH$_3$)$_6$]$^{3+}$ is diamagnetic whereas [CoF$_6$]$^{3-}$ is paramagnetic โ True.
Thus, correct answer is option: (1) Both Statement I and Statement II are true
77. Match List I with List II.
| List-I (Molecule) | List-II (Number and types of bond/s between two carbon atoms) |
| A. ethane | I. one $\sigma$-bond and two $\pi$-bonds |
| B. ethene | II. two $\pi$-bonds |
| C. carbon molecule, C$_2$ | III. one $\sigma$-bond |
| D. ethyne | IV. one $\sigma$-bond and one $\pi$-bond |
Choose the correct answer from the options given below:
(1) A-I, B-IV, C-II, D-III
(2) A-IV, B-III, C-II, D-I
(3) A-III, B-IV, C-II, D-I
(4) A-III, B-IV, C-I, D-II
Answer: (3) A-III, B-IV, C-II, D-I
Solution:
We are asked to match molecules with the number and types of bonds between two carbon atoms.
Step 1: Ethane (C$_2$H$_6$)
Carbonโcarbon bond is a single bond.
So, it has one ฯ-bond.
(A) โ III.
Step 2: Ethene (C$_2$H$_4$)
Carbonโcarbon bond is a double bond.
So, it has one ฯ-bond and one ฯ-bond.
(B) โ IV.
Step 3: Carbon molecule (C$_2$)
In molecular orbital theory, C$_2$ has bond order 2.
Thus, it consists of two ฯ-bonds only (ฯ-bonds cancel due to MO filling).
(C) โ II.
Step 4: Ethyne (C$_2$H$_2$)
Carbonโcarbon bond is a triple bond.
So, it has one ฯ-bond and two ฯ-bonds.
(D) โ I.
Step 5: Final matching
A โ III
B โ IV
C โ II
D โ I
This corresponds to option (3).
Thus, correct answer is option: (3) A-III, B-IV, C-II, D-I
78. The Henry’s law constant (K$_H$) values of three gases (A, B, C) in water are 145, $2 \times 10^{-5}$ and 35 kbar, respectively. The solubility of these gases in water follows the order:
(1) B $>$ A $>$ C
(2) B $>$ C $>$ A
(3) A $>$ C $>$ B
(4) A $>$ B $>$ C
Answer: (2) B $>$ C $>$ A
Solution:
We are asked about the solubility order of gases in water based on Henry’s law constant.
Step 1: Recall Henry’s law
According to Henryโs law:
$$C = \frac{P}{K_H}$$
where
– $C$ = concentration (solubility) of the gas,
– $P$ = partial pressure of the gas,
– $K_H$ = Henryโs law constant.
Thus, smaller $K_H$ โ higher solubility.
Step 2: Given values of $K_H$
– Gas A: $K_H = 145$ kbar
– Gas B: $K_H = 2 \times 10^{-5}$ kbar
– Gas C: $K_H = 35$ kbar
Step 3: Compare solubility
Since solubility $\propto \dfrac{1}{K_H}$:
– Gas B (very small $K_H$) โ highest solubility.
– Gas C (moderate $K_H$) โ next.
– Gas A (largest $K_H$) โ lowest solubility.
So the order is:
$$B > C > A$$
Thus, correct answer is option: (2) B $>$ C $>$ A
79. The energy of an electron in the ground state ($n = 1$) for He$^+$ ion is $-x$J, then that for an electron in $n = 2$ state for Be$^{3+}$ ion in J is:
(1) $-x$
(2) $\dfrac{-x}{9}$
(3) $-4x$
(4) $\dfrac{-4}{9}x$
Answer: (1) $-x$
Solution:
We are asked to calculate the energy of an electron in the $n=2$ state for Be$^{3+}$ given that the ground state ($n=1$) energy for He$^+$ is $-x$ J.
Step 1: Formula for energy of hydrogen-like ions
For a one-electron system (H-like ion):
$$E_n = – \frac{Z^2 R_H}{n^2}$$
where
– $Z$ = atomic number,
– $R_H$ = Rydberg constant (in energy units),
– $n$ = principal quantum number.
Step 2: Reference energy
For He$^+$, $Z = 2$, ground state ($n=1$):
$$E_{1}^{\text{He}^+} = – \frac{(2^2)R_H}{1^2} = -4R_H$$
It is given that this energy = $-x$.
So,
$$R_H = \frac{x}{4}$$
Step 3: Required energy for Be$^{3+}$
For Be$^{3+}$, $Z=4$, $n=2$:
$$E_{2}^{\text{Be}^{3+}} = – \frac{(4^2)R_H}{2^2} = – \frac{16R_H}{4} = -4R_H$$
Substitute $R_H = \dfrac{x}{4}$:
$$E_{2}^{\text{Be}^{3+}} = -4 \cdot \frac{x}{4} = -x$$
Step 4: Correct option
The energy is $-x$ J.
Thus, correct answer is option: (1) $-x$
80. The E$^\circ$ value for the Mn$^{3+}$/Mn$^{2+}$ couple is more positive than that of Cr$^{3+}$/Cr$^{2+}$ or Fe$^{3+}$/Fe$^{2+}$ due to the change of
(1) d$^5$ to d$^4$ configuration
(2) d$^5$ to d$^2$ configuration
(3) d$^4$ to d$^5$ configuration
(4) d$^3$ to d$^5$ configuration
Answer: (3) d$^4$ to d$^5$ configuration
Solution:
We are asked why the $E^\circ$ value for the Mn$^{3+}$/Mn$^{2+}$ couple is more positive than that of Cr$^{3+}$/Cr$^{2+}$ or Fe$^{3+}$/Fe$^{2+}$.
Step 1: Recall electronic configurations
– Mn ($Z = 25$): [Ar] 3d$^5$ 4s$^2$
Mn$^{2+}$: [Ar] 3d$^5$
Mn$^{3+}$: [Ar] 3d$^4$
Step 2: Stability considerations
– Mn$^{2+}$ has a half-filled 3d$^5$ configuration, which is especially stable.
– Mn$^{3+}$ has a 3d$^4$ configuration, which is less stable.
– Because Mn$^{2+}$ is very stable, the reduction Mn$^{3+}$ โ Mn$^{2+}$ is strongly favored.
– Therefore, the standard reduction potential $E^\circ$ is more positive for Mn$^{3+}$/Mn$^{2+}$ compared to Cr or Fe.
Step 3: Correct reason
The key factor is the change from d$^4$ to d$^5$ configuration, which results in extra stability.
Thus, correct answer is option: (3) d$^4$ to d$^5$ configuration
81. The reagents with which glucose does not react to give the corresponding tests/products are
A. Tollenโs reagent
B. Schiffโs reagent
C. HCN
D. NH$_2$OH
E. NaHSO$_3$
Choose the correct options from the given below:
(1) B and C
(2) A and D
(3) B and E
(4) E and D
Answer: (3) B and E
Solution:
We are asked to identify the reagents with which glucose does not react.
Step 1: Recall glucose structure and reactivity
Glucose is an aldohexose containing an aldehyde group in its open-chain form.
It can undergo reactions characteristic of aldehydes.
– With Tollenโs reagent (A): Aldehydes are oxidized, silver mirror test is positive. Glucose reacts.
– With Schiffโs reagent (B): Aldehydes restore the pink color. However, glucose being mostly in cyclic hemiacetal form, does not give a positive Schiffโs test under normal conditions.
– With HCN (C): Aldehydes react with HCN to give cyanohydrins. Glucose reacts.
– With NH$_2$OH (D): Aldehydes form oximes. Glucose reacts.
– With NaHSO$_3$ (E): Aldehydes normally form bisulfite addition products, but glucose (mainly in cyclic hemiacetal form) does not readily give this reaction.
Step 2: Identify non-reactive cases
Glucose does not give Schiffโs test (B) and does not react with NaHSO$_3$ (E).
Thus, correct answer is option: (3) B and E
82. Match List I with List II.
| List-I (Complex) | List-II (Type of isomerism) |
| A. [Co(NH$_3$)$_5$(NO$_2$)]Cl$_2$ | I. Solvate isomerism |
| B. [Co(NH$_3$)$_5$(SO$_4$)]Br | II. Linkage isomerism |
| C. [Co(NH$_3$)$_6$][Cr(CN)$_6$] | III. Ionization isomerism |
| D. [Co(H$_2$O)$_6$]Cl$_3$ | IV. Coordination isomerism |
Choose the correct answer from the options given below:
(1) A-II, B-III, C-IV, D-I
(2) A-I, B-III, C-IV, D-II
(3) A-I, B-IV, C-III, D-II
(4) A-II, B-IV, C-III, D-I
Answer: (1) A-II, B-III, C-IV, D-I
Solution:
We are asked to match complexes (List I) with their type of isomerism (List II).
Step 1: Complex A โ [Co(NH$_3$)$_5$(NO$_2$)]Cl$_2$
Here, NO$_2^-$ can coordinate either through N (nitro) or O (nitrito).
This is linkage isomerism.
A โ II.
Step 2: Complex B โ [Co(NH$_3$)$_5$(SO$_4$)]Br
This complex can give ionization isomerism because SO$_4^{2-}$ or Br$^-$ can act as counter-ions.
For example: [Co(NH$_3$)$_5$Br]SO$_4$.
So, B โ III.
Step 3: Complex C โ [Co(NH$_3$)$_6$][Cr(CN)$_6$]
This is a case of coordination isomerism, where ligands can be exchanged between the two metal centers.
So, C โ IV.
Step 4: Complex D โ [Co(H$_2$O)$_6$]Cl$_3$
This shows solvate isomerism, because water can be present either inside the coordination sphere or outside as solvent molecules.
So, D โ I.
Step 5: Final matching
A โ II
B โ III
C โ IV
D โ I
Thus, correct answer is option: (1) A-II, B-III, C-IV, D-I
83. Arrange the following elements in increasing order of first ionization enthalpy:
Li, Be, B, C, N
Choose the correct answer from the options given below:
(1) Li $<$ Be $<$ B $<$ C $<$ N
(2) Li $<$ B $<$ Be $<$ C $<$ N
(3) Li $<$ Be $<$ C $<$ B $<$ N
(4) Li $<$ Be $<$ N $<$ B $<$ C
Answer: (2) Li $<$ B $<$ Be $<$ C $<$ N
Solution:
We are asked to arrange Li, Be, B, C, N in increasing order of first ionization enthalpy.
Step 1: General trend
– Ionization enthalpy increases across a period (left โ right) in the periodic table.
– Order across Period 2 should generally be:
Li < Be < B < C < N < O < F
Step 2: Check for exceptions
There are small anomalies:
– Be has higher ionization enthalpy than B (due to fully filled 2s orbital stability).
– N has higher ionization enthalpy than O (due to half-filled 2p$^3$ stability).
But for the given set (Li, Be, B, C, N), the order remains:
Li < B < Be < C < N
Step 3: Match with options
This corresponds to option (2).
Thus, correct answer is option: (2) Li $<$ B $<$ Be $<$ C $<$ N
84. 1 gram of sodium hydroxide was treated with 25 mL of 0.75 M HCl solution, the mass of sodium hydroxide left unreacted is equal to
(1) 750 mg
(2) 250 mg
(3) Zero mg
(4) 200 mg
Answer: (2) 250 mg
Solution:
We are asked to find the mass of sodium hydroxide left unreacted after treatment with HCl.
Step 1: Write balanced reaction
NaOH + HCl โ NaCl + H$_2$O
1 mole of NaOH reacts with 1 mole of HCl.
Step 2: Moles of NaOH taken
Molar mass of NaOH = 40 g/mol
Moles of NaOH = $\dfrac{1}{40} = 0.025$ mol
Step 3: Moles of HCl provided
Volume of HCl = 25 mL = 0.025 L
Molarity = 0.75 M
Moles of HCl = $0.75 \times 0.025 = 0.01875$ mol
Step 4: Limiting reagent
– Available NaOH = 0.025 mol
– Available HCl = 0.01875 mol
Since HCl is less, it is the limiting reagent.
Thus, moles of NaOH reacting = 0.01875 mol
Step 5: Moles of NaOH left
NaOH initially = 0.025 mol
NaOH reacted = 0.01875 mol
Remaining = $0.025 – 0.01875 = 0.00625$ mol
Step 6: Mass of NaOH left
Mass = moles ร molar mass = $0.00625 \times 40 = 0.25$ g = 250 mg
Thus, correct answer is option: (2) 250 mg
85. For the reaction $2A \rightleftharpoons B + C$, $K_c = 4 \times 10^{-3}$. At a given time, the composition of reaction mixture is:
$[A] = [B] = [C] = 2 \times 10^{-3}$ M.
Then, which of the following is correct?
(1) Reaction is at equilibrium.
(2) Reaction has a tendency to go in forward direction.
(3) Reaction has a tendency to go in backward direction.
(4) Reaction has gone to completion in forward direction.
Answer: (3) Reaction has a tendency to go in backward direction.
Solution:
We are asked about the direction of the reaction:
$$2A \rightleftharpoons B + C, \quad K_c = 4 \times 10^{-3}.$$
Step 1: Write expression for $K_c$
$$K_c = \frac{[B][C]}{[A]^2}$$
Step 2: Calculate reaction quotient $Q_c$
At the given instant:
$[A] = [B] = [C] = 2 \times 10^{-3}$ M
So,
$$Q_c = \frac{(2 \times 10^{-3})(2 \times 10^{-3})}{(2 \times 10^{-3})^2}$$
$$Q_c = \frac{4 \times 10^{-6}}{4 \times 10^{-6}} = 1$$
Step 3: Compare $Q_c$ with $K_c$
– $K_c = 4 \times 10^{-3} = 0.004$
– $Q_c = 1$
Since $Q_c > K_c$, the reaction mixture has more products than equilibrium requires.
Therefore, the reaction will shift in the **backward direction** to reach equilibrium.
Step 4: Correct option
(3) Reaction has a tendency to go in backward direction.
Thus, correct answer is option:$(3) \; \text{Reaction has a tendency to go in backward direction.}$
Chemistry : Section – B
86. Given below are certain cations. Using inorganic qualitative analysis, arrange them in increasing group number from 0 to VI.
A. Al$^{3+}$
B. Cu$^{2+}$
C. Ba$^{2+}$
D. Co$^{2+}$
E. Mg$^{2+}$
Choose the correct answer from the options given below:
(1) B, A, D, C, E
(2) B, C, A, D, E
(3) E, C, D, B, A
(4) E, A, B, C, D
Answer: (1) B, A, D, C, E
87. The products A and B obtained in the following reactions, respectively, are
$3ROH + PCl_3 \rightarrow 3RCl + A$
$ROH + PCl_5 \rightarrow RCl + HCl + B$
(1) POCl$_3$ and H$_3$PO$_3$
(2) POCl$_3$ and H$_3$PO$_4$
(3) H$_3$PO$_4$ and POCl$_3$
(4) H$_3$PO$_3$ and POCl$_3$
Answer: (4) H$_3$PO$_3$ and POCl$_3$
Solution:
We are asked to identify the products A and B in the reactions:
Step 1: Reaction with PCl$_3$
$$3ROH + PCl_3 \rightarrow 3RCl + H_3PO_3$$
Thus, product A = H$_3$PO$_3$ (phosphorous acid).
Step 2: Reaction with PCl$_5$
$$ROH + PCl_5 \rightarrow RCl + HCl + POCl_3$$
Thus, product B = POCl$_3$ (phosphoryl chloride).
Step 3: Final products
– A = H$_3$PO$_3$
– B = POCl$_3$
Thus, correct answer is option: (4) H$_3$PO$_3$ and POCl$_3$
88. Mass in grams of copper deposited by passing 9.6487 A current through a voltmeter containing copper sulphate solution for 100 seconds is:
(Given: Molar mass of Cu : 63 g mol$^{-1}$, 1F = 96487 C)
(1) 3.15 g
(2) 0.315 g
(3) 31.5 g
(4) 0.0315 g
Answer: (2) 0.315 g
Solution:
We are asked to calculate the mass of copper deposited by electrolysis.
Step 1: Write the half-reaction
$$\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu (s)}$$
So, 2 moles of electrons are required to deposit 1 mole of Cu.
Step 2: Charge passed
Current = 9.6487 A
Time = 100 s
Charge, $Q = I \cdot t = 9.6487 \times 100 = 964.87 \, C$
Step 3: Faraday relation
1 Faraday = 96487 C corresponds to 1 mole of electrons.
So,
$$\text{Moles of electrons passed} = \frac{964.87}{96487} = 0.01 \, mol \, e^-$$
Step 4: Moles of copper deposited
Since 2 mol $e^-$ deposit 1 mol Cu,
$$\text{Moles of Cu} = \frac{0.01}{2} = 0.005 \, mol$$
Step 5: Mass of copper deposited
$$\text{Mass} = \text{moles} \times \text{molar mass}$$
$$= 0.005 \times 63 = 0.315 \, g$$
Step 6: Correct option
The mass deposited is 0.315 g.
Thus, correct answer is option: (2) 0.315 g
89. The plot of osmotic pressure ($\Pi$) vs concentration (mol L$^{-1}$) for a solution gives a straight line with slope 25.73 L bar mol$^{-1}$. The temperature at which the osmotic pressure measurement is done is:
(Use R = 0.083 L bar mol$^{-1}$ K$^{-1}$)
(1) $37\circC$
(2) $ 310\circC$
(3) $25.73\circC$
(4) $12.05\circC$
Answer: (1) $37\circC$
Solution:
We are asked to calculate the temperature at which osmotic pressure was measured.
Step 1: Recall formula for osmotic pressure
For dilute solutions:
$$\Pi = CRT$$
So, slope of $\Pi$ vs $C$ plot = $RT$.
Step 2: Given data
Slope = 25.73 L bar mol$^{-1}$
Gas constant, $R = 0.083 \, \text{L bar mol}^{-1}\text{K}^{-1}$
Thus,
$$T = \frac{\text{slope}}{R} = \frac{25.73}{0.083}$$
Step 3: Calculate
$$T = 310 \, K$$
Convert to Celsius:
$$T = 310 – 273 = 37^\circ C$$
Step 4: Correct option
The temperature is $37^\circ$C.
Thus, correct answer is option:(1) $37\circC$
90. Identify the major product C formed in the following reaction sequence:
$$ \text{CH}_3 – \text{CH}_2 – \text{CH}_2 – \text{I} \xrightarrow{\text{NaCN}} A $$
$$ \overset{\text{Partial hydrolysis}}{\xrightarrow{\text{OH}^-}} B \xrightarrow{\text{NaOH, Br}_2} C \quad (\text{Major})$$
(1) propylamine
(2) butylamine
(3) butanamide
(4) $\alpha$ โ bromobutanoic acid
Answer: (1) propylamine
Solution:
We are asked to identify the major product C in the given sequence.
Step 1: First reaction (with NaCN)
$$ \text{CH}_3 – \text{CH}_2 – \text{CH}_2 – \text{I} \xrightarrow{\text{NaCN}} \text{CH}_3 – \text{CH}_2 – \text{CH}_2 – \text{CโกN} $$
So, compound A = butanenitrile.
Step 2: Partial hydrolysis of nitrile (in presence of OH$^-$)
Nitrile undergoes partial hydrolysis to form an amide.
So,
$$ \text{Butanenitrile} \xrightarrow{\text{OH}^-} \text{Butanamide} $$
Thus, compound B = butanamide.
Step 3: Reaction with NaOH and Br$_2$ (Hofmann bromamide reaction)
In Hofmann bromamide degradation:
$$ \text{RCONH}_2 \xrightarrow{\text{Br}_2, \text{NaOH}} \text{RNH}_2 $$
with loss of one carbon atom.
So,
$$ \text{Butanamide} \; (C_3H_7CONH_2) \longrightarrow \text{Propylamine} \; (C_3H_7NH_2) $$
Thus, compound C = propylamine.
Step 4: Correct option
C = propylamine.
Thus, correct answer is option: (1) propylamine
91. Identify the correct answer.
(1) Three resonance structures can be drawn for ozone
(2) BF$_3$ has non-zero dipole moment
(3) Dipole moment of NF$_3$ is greater than that of NH$_3$
(4) Three canonical forms can be drawn for CO$_3^{2-}$ ion.
Answer: (4) Three canonical forms can be drawn for CO$_3^{2-}$ ion.
Solution:
We are asked to find the correct statement among the given options.
Step 1: Option (1)
Ozone (O$_3$) has a bent structure.
It can be represented by **two resonance structures** (with alternating double bond positions).
Not three.
So, option (1) is incorrect.
Step 2: Option (2)
BF$_3$ has a trigonal planar structure.
The three BโF bonds are oriented at 120ยฐ, and their dipole moments cancel each other.
Hence, the overall dipole moment is zero.
So, option (2) is incorrect.
Step 3: Option (3)
NH$_3$: dipole moment = 1.47 D
NF$_3$: dipole moment = 0.24 D
Reason: In NH$_3$, the bond dipoles and lone pair dipole act in the same direction.
In NF$_3$, the bond dipoles oppose the lone pair dipole, lowering the net dipole moment.
Thus, $\mu$(NF$_3$) < $\mu$(NH$_3$).
So, option (3) is incorrect.
Step 4: Option (4)
CO$_3^{2-}$ has delocalized $\pi$-electrons over three CโO bonds.
It can be represented by three equivalent canonical (resonance) forms.
Thus, correct answer is option: (4) Three canonical forms can be drawn for CO$_3^{2-}$ ion.
92. Given below are two statements:
Statement I: $[Co(NH_3)_6]^{3+}$ is a homoleptic complex whereas $[Co(NH_3)_4Cl_2]^{+}$ is a heteroleptic complex.
Statement II: Complex $[Co(NH_3)_6]^{3+}$ has only one kind of ligand, but $[Co(NH_3)_4Cl_2]^{+}$ has more than one kind of ligand.
In the light of the above statements, choose the correct answer from the options given below:
(1) Both Statement I and Statement II are true.
(2) Both Statement I and Statement II are false.
(3) Statement I is true but Statement II is false.
(4) Statement I is false but Statement II is true.
Answer: (1) Both Statement I and Statement II are true.
Solution:
We are asked to check the validity of the two statements.
Step 1: Recall definitions
– Homoleptic complex: A complex in which the central metal ion is bound to only one type of ligand.
– Heteroleptic complex: A complex in which the central metal ion is bound to more than one type of ligand.
Step 2: Analyze complexes
(1) $[Co(NH_3)_6]^{3+}$
– Contains only NH$_3$ ligands.
– Hence, it is homoleptic.
(2) $[Co(NH_3)_4Cl_2]^{+}$
– Contains NH$_3$ and Cl$^-$ ligands.
– Hence, it is heteroleptic.
Step 3: Evaluate statements
– Statement I: Correct (homoleptic vs heteroleptic classification is right).
– Statement II: Correct (one kind of ligand in first, more than one kind in second).
Thus, correct answer is option: (1) Both Statement I and Statement II are true.
93. For the given reaction

(1)

(2)

(3)

(4)

Answer: (2)

94. The pair of lanthanoid ions which are diamagnetic is
(1) Ce$^{4+}$ and Yb$^{2+}$
(2) Ce$^{3+}$ and Eu$^{2+}$
(3) Gd$^{3+}$ and Eu$^{3+}$
(4) Pm$^{3+}$ and Sm$^{3+}$
Answer: (1) Ce$^{4+}$ and Yb$^{2+}$
Solution:
We are asked to identify the pair of lanthanoid ions which are diamagnetic.
Step 1: Recall condition for diamagnetism
A species is diamagnetic if all electrons are paired (i.e., no unpaired electrons).
Step 2: Check each option
(1) Ce$^{4+}$ and Yb$^{2+}$
– Ce: [Xe] 4f$^1$ 5d$^1$ 6s$^2$
Ce$^{4+}$ โ [Xe] (4f$^0$), all electrons paired โ diamagnetic.
– Yb: [Xe] 4f$^{14}$ 6s$^2$
Yb$^{2+}$ โ [Xe] 4f$^{14}$, completely filled f-orbital, all paired โ diamagnetic.
Thus, both are diamagnetic.
(2) Ce$^{3+}$ and Eu$^{2+}$
– Ce$^{3+}$ โ 4f$^1$, has one unpaired electron โ paramagnetic.
– Eu$^{2+}$ โ 4f$^7$, half-filled, unpaired electrons โ paramagnetic.
(3) Gd$^{3+}$ and Eu$^{3+}$
– Gd$^{3+}$ โ 4f$^7$, half-filled, unpaired electrons โ paramagnetic.
– Eu$^{3+}$ โ 4f$^6$, unpaired electrons โ paramagnetic.
(4) Pm$^{3+}$ and Sm$^{3+}$
– Pm$^{3+}$ โ 4f$^4$, unpaired electrons โ paramagnetic.
– Sm$^{3+}$ โ 4f$^5$, unpaired electrons โ paramagnetic.
Step 3: Correct option
Only option (1) has both ions diamagnetic.
Thus, correct answer is option: (1) Ce$^{4+}$ and Yb$^{2+}$
95. Consider the following reaction in a sealed vessel at equilibrium with concentrations of
N$_2$ = $3.0 \times 10^{-3}$ M, O$_2$ = $4.2 \times 10^{-3}$ M and NO = $2.8 \times 10^{-3}$ M.
$ 2NO_{(g)} \rightleftharpoons N_2_{(g)} + O_2_{(g)}$
If 0.1 mol L$^{-1}$ of NO$_{(g)}$ is taken in a closed vessel, what will be the degree of dissociation ($\alpha$) of NO$_{(g)}$ at equilibrium?
(1) 0.00889
(2) 0.0889
(3) 0.8889
(4) 0.717
Answer: (4) 0.717
Solution:
We are asked to calculate the degree of dissociation (ฮฑ) of NO(g) for the equilibrium:
$$2NO \rightleftharpoons N_2 + O_2$$
Step 1: Write expression for equilibrium constant
For equilibrium concentrations given:
$[N_2] = 3.0 \times 10^{-3}$ M,
$[O_2] = 4.2 \times 10^{-3}$ M,
$[NO] = 2.8 \times 10^{-3}$ M
The equilibrium constant is:
$$K_c = \frac{[N_2][O_2]}{[NO]^2}$$
Substitute:
$$K_c = \frac{(3.0 \times 10^{-3})(4.2 \times 10^{-3})}{(2.8 \times 10^{-3})^2}$$
$$K_c = \frac{12.6 \times 10^{-6}}{7.84 \times 10^{-6}} \approx 1.607$$
Step 2: Initial conditions
Initial concentration of NO = 0.1 M
Degree of dissociation = ฮฑ
Change:
– $2NO \rightarrow N_2 + O_2$
At equilibrium:
$[NO] = 0.1(1-\alpha)$
$[N_2] = 0.05 \alpha$
$[O_2] = 0.05 \alpha$
Step 3: Write $K_c$ expression with ฮฑ
$$K_c = \frac{[N_2][O_2]}{[NO]^2} = \frac{(0.05\alpha)(0.05\alpha)}{(0.1(1-\alpha))^2}$$
$$K_c = \frac{0.0025\alpha^2}{0.01(1-\alpha)^2}$$
$$K_c = 0.25 \cdot \frac{\alpha^2}{(1-\alpha)^2}$$
Step 4: Substitute $K_c = 1.607$
$$1.607 = 0.25 \cdot \frac{\alpha^2}{(1-\alpha)^2}$$
Multiply through:
$$\frac{\alpha^2}{(1-\alpha)^2} = \frac{1.607}{0.25} = 6.428$$
Take square root:
$$\frac{\alpha}{1-\alpha} = \sqrt{6.428} \approx 2.536$$
So:
$$\alpha = 2.536(1-\alpha)$$
$$\alpha = 2.536 – 2.536\alpha$$
$$\alpha + 2.536\alpha = 2.536$$
$$3.536\alpha = 2.536$$
$$\alpha = 0.717$$
Thus, correct answer is option: (4) 0.717
96. A compound X contains 32% of A, 20% of B and the remaining percentage of C. Then, the empirical formula of X is:
(Given atomic masses of A = 64; B = 40; C = 32 u)
(1) A$_2$BC$_2$
(2) ABC$_3$
(3) AB$_2$C$_2$
(4) ABC$_4$
Answer: (2) ABC$_3$
Solution:
We are asked to determine the empirical formula of a compound X.
Step 1: Percentage composition
– A = 32%
– B = 20%
– C = 100 โ (32 + 20) = 48%
Step 2: Convert to moles
Moles of A = $\dfrac{32}{64} = 0.5$
Moles of B = $\dfrac{20}{40} = 0.5$
Moles of C = $\dfrac{48}{32} = 1.5$
Step 3: Simplify ratio
A : B : C = 0.5 : 0.5 : 1.5
Divide through by 0.5:
A : B : C = 1 : 1 : 3
Step 4: Empirical formula
Thus, the empirical formula is:
$$ABC_3$$
Thus, correct answer is option: (2) ABC$_3$
97. The work done during reversible isothermal expansion of one mole of hydrogen gas at 25ยฐC from a pressure of 20 atmosphere to 10 atmosphere is:
(Given R = 2.0 cal K$^{-1}$ mol$^{-1}$)
(1) 0 calorie
(2) โ413.14 calories
(3) 413.14 calories
(4) 100 calories
Answer: (2) โ413.14 calories
Solution:
We are asked to calculate the work done during reversible isothermal expansion of hydrogen gas.
Step 1: Formula for isothermal reversible work
For one mole of an ideal gas,
$$w = -2.303 \, nRT \, \log \frac{P_1}{P_2}$$
where $n = 1$, $R = 2 \, \text{cal K}^{-1}\text{mol}^{-1}$, $T = 25^\circ C = 298 \, K$,
$P_1 = 20 \, atm$, $P_2 = 10 \, atm$.
Step 2: Substitute values
$$w = -2.303 \times 1 \times 2 \times 298 \times \log\left(\frac{20}{10}\right)$$
Since $\log(2) = 0.3010$:
$$w = -2.303 \times 2 \times 298 \times 0.3010$$
Step 3: Calculate
$2.303 \times 0.3010 \approx 0.693$
So,
$$w = -2 \times 298 \times 0.693$$
$$w \approx -412.9 \, \text{cal}$$
โ โ413.14 cal
Thus, correct answer is option: (2) โ413.14 calories
98. During the preparation of Mohr’s salt solution (Ferrous ammonium sulphate), which of the following acids is added to prevent hydrolysis of Fe$^{2+}$ ion?
(1) dilute hydrochloric acid
(2) concentrated sulphuric acid
(3) dilute nitric acid
(4) dilute sulphuric acid
Answer: (4) dilute sulphuric acid
Solution:
We are asked which acid is added during preparation of Mohrโs salt solution to prevent hydrolysis of Fe$^{2+}$ ions.
Step 1: About Mohrโs salt
Mohrโs salt = ferrous ammonium sulphate, formula:
$FeSO_4 \cdot (NH_4)_2SO_4 \cdot 6H_2O$
Fe$^{2+}$ ion in aqueous solution is prone to hydrolysis and oxidation to Fe$^{3+}$.
Step 2: Role of acid
– To prevent hydrolysis of Fe$^{2+}$ ions, a small amount of dilute sulphuric acid (H$_2$SO$_4$) is added.
– This keeps the solution acidic, preventing hydrolysis and also oxidation of Fe$^{2+}$ to Fe$^{3+}$.
– Hydrochloric acid is avoided because chloride ions may interfere in redox titrations.
– Nitric acid is avoided because it is an oxidizing agent.
– Concentrated sulphuric acid cannot be used because it is too strong and dehydrating.
Thus, correct answer is option: (4) dilute sulphuric acid
99. The rate of a reaction quadruples when temperature changes from 27ยฐC to 57ยฐC.
Calculate the energy of activation.
Given R = 8.314 J K$^{-1}$ mol$^{-1}$, log 4 = 0.6021
(1) 38.04 kJ/mol
(2) 380.4 kJ/mol
(3) 3.80 kJ/mol
(4) 3804 kJ/mol
Answer: (1) 38.04 kJ/mol
Solution:
We are asked to calculate the activation energy (Eโ) given that the reaction rate quadruples when temperature increases from 27ยฐC to 57ยฐC.
Step 1: Recall Arrhenius relation (two-temperature form)
$$\log \left(\frac{k_2}{k_1}\right) = \frac{E_a}{2.303R} \left(\frac{1}{T_1} – \frac{1}{T_2}\right)$$
Step 2: Substitution of values
– $k_2/k_1 = 4$
– $\log(4) = 0.6021$
– $R = 8.314 \, \text{J mol}^{-1}\text{K}^{-1}$
– $T_1 = 27 + 273 = 300 \, K$
– $T_2 = 57 + 273 = 330 \, K$
So,
$$0.6021 = \frac{E_a}{2.303 \times 8.314} \left(\frac{1}{300} – \frac{1}{330}\right)$$
Step 3: Simplify
$$\frac{1}{300} – \frac{1}{330} = \frac{330 – 300}{300 \times 330} = \frac{30}{99000} = 3.03 \times 10^{-4}$$
Denominator: $2.303 \times 8.314 = 19.147$
So,
$$0.6021 = \frac{E_a}{19.147} \times 3.03 \times 10^{-4}$$
Step 4: Solve for $E_a$
$$E_a = \frac{0.6021 \times 19.147}{3.03 \times 10^{-4}}$$
$$E_a \approx \frac{11.52}{3.03 \times 10^{-4}}$$
$$E_a \approx 3.80 \times 10^4 \, \text{J mol}^{-1}$$
= 38.04 kJ/mol
Thus, correct answer is option: (1) 38.04 kJ/mol
100. Major products A and B formed in the following reaction sequence, are

(1)

(2)

(3)

(4)

Answer: (1)




